Offering excellent warmth with a more natural feel on a board, these wetsuit booties are made from 4mm 85% Yulex® natural rubber/15% synthetic rubber by polymer content. Suggested water temperatures: 38°–48° F/3°–9° C. Fair Trade Certified™ sewn.
- Home /
- WETSUITS /
- WETSUIT ACCESSORIES /
- Booties /
- Rip Curl Junior Reef Walker
Rip Curl Junior Reef Walker
Stock Code:
WBO6AJ-0
Stock Code:
WBO6AJ-1
Price:
$24.00
Price:
$24.00
Stock Level
In Stock
In Stock
In Stock
Protective, lightweight reefwalkers great for use in all wet domains. Featuring mesh water flow panels these quick drying shoes are great for beach / reef walking.
SIZING (outsole length)
- 0 - 18.1cm
- 1 - 18.9cm
- 2 - 19.7cm
- 3 - 21.4cm
- 4 - 22.2cm
- 5 - 23cm
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
The Xcel Reef Bootie is a 1mm lightweight flexible split toe boot made with a superlight neoprene engineered to fit your feet. Walk on rocks or reef without hurting your feet!
Was:$79.00Now:$39.00Price:$39.00 -
Our most popular and most premium surf boot, featuring revolutionary TDC Thermo Dry Celliant, our warmest inner lining ever. TDC features mineral-enhanced smart fibers that recycle body heat into infrared energy for greater warmth, increased endurance, faster recovery, and enhanced overall performance.
The Drylock is loaded with more exclusive features including ergonomically angled Velcro straps and seamless Drylock ankle seals for an ultra-premium, comfortable fit. The thin yet durable sole design allows for a better, true-to-the-board feel, and the sole is solid underneath the split toe to prevent annoying leash hangups.
The Drylock boot also features 100% UltraStretch neoprene and a glued and blindstitched seam construction sealed with inner Thermo Dry Seam tape and outer Taitex to keep warmth in. Even the back ankle pull loop is Pressure Bonded to the outer boot, which keeps even more water out since no stitching ever penetrates through the boot neoprene.
$145.00 -
This 1mm split toe bootie folds away into your pocket to get you in and out across the reef! So you can surf in bare feet. For sizing we have found it is best to go up 2 sizes.
$49.00 -
Solite's obsession with booties means the lightest, best-performing boot on the market has stepped up several notches for winter 2019, featuring improved board feel, grip, flexibility, comfort, and durability. How'd they make the world's best boot even better?
1. Solite's natural rubber sole pods are made with a softer, tackier, more flexible compound for improved traction both on a board and on slippery rocks.
2. Heat-moldable Thermo Foam has also been updated with a softer, more comfortable formula which stays soft in colder temps.
3. Completely redesigned our velcro ankle strap, co-molding the textile strap to the rubber sole and introducing a flexible, durable Tatex-coated hook strap for a stronger hold.
Recommended Water Temps: 50-60F.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7.
Key Features:
- Heat-moldable with boiling water for the perfect custom fit.
- NEW softer-compound thermo-foam sole for next-level comfort, warmth, dexterity, and durability.
- Internal split-toe locks your foot inside the boot for precise response.
- NEW super-tacky and flexible 1mm vulcanized rubber sole pods for barefoot board feel, grip, and abrasion resistance.
- 3mm neoprene upper with quad-sealed seams (glue, blind-stitch, stretch tape inside, liquid weld outside).
- NEW full-wrap ankle strap co-molded into the sole improves durability.
- NEW Tatex-coated hook strap improves durability and holding power.
- Tatex heel spine and laminated heel-pull for durability and easy on.
- High pile quick-dry lining retains heat and feels comfy.
- Double-lined 3mm O-ring cuff seal provides a durable, seamless barrier against flushing with lower bulk.
- Includes a pair of knit Solite Heat Booster socks for added warmth, comfort, and easy on/off.
Was:$135.00Now:$69.00Price:$69.00 -
Style No. 89438
Made with Natural Rubber
85% Yulex® natural rubber/15% synthetic, chlorine-free rubber by polymer content; natural rubber is Forest Stewardship Council® certified by the Rainforest AllianceWarm Thermal Lining
Warm and stretchy solution-dyed 95% polyester (51% recycled)/5% spandex microgrid thermal lining dries fast and minimizes weightSolution-Dyed Recycled Polyester and Water-Based Glue
Stretchy, solution-dyed exterior is 88% recycled polyester/12% spandex; exterior and lining laminated with solvent-free, water-based AquaA™ glueDurably Built
All seams are triple-glued, blindstitched and 100% internally tapedSplit-Toe Design
Split-toe construction for maximum dexterity and a more natural feel on your board; low-profile design slides easily into swim finsGrippy Soles
Supratex soles with Tatex rubber touch points provide increased traction and flexibilitySupporting the People Who Made This Product
Fair Trade Certified™ sewnCountry of Origin
Made in Thailand.Weight
264 g (9.3 oz)
- 4mm 85% Yulex® natural rubber/15% synthetic rubber by polymer content, lined with 95% polyester (51% recycled)/5% spandex inverted microgrid
- Exterior: 88% recycled polyester/12% spandex
- Natural rubber is from sources that are Forest Stewardship Council® certified by the Rainforest Alliance
- Fair Trade Certified™ sewn
$129.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:
3D-Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior
Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$129.00 -
Rip Curl Flashbomb Hiddden Split Toe 5mm Booties
The Rip Curl Flashbomb 5mm Hidden Split Toe Booties are lifesavers when winter and cold water hits. Featuring a 0.6mm sole with textured grip, ultra flexible soft soles, you'll feel more dialled in than ever.
Designed with sealed seams to keep water out, detailed with Flash Lining interior that dries rapidly. These boots are made for surfing, no matter how harsh the conditions.
Features:
- Flash Lining
- 0.6mm thin rubber sole
- Ankle and foot strap
- Slide on easy S.O.S system
- Textured grip print
- Anti-stink treated
- Seam sealed
$139.00 - Flash Lining
-
Billabong Furnace Hidden Split Toes Boots 3mm
Sustainable style meets performance-enhancing innovation in the Billabong 3mm Furnace Wetsuit Boots. Featuring premium, lightweight neoprene designed to keep you warm and boost mobility, these men’s wetsuit boots are made with recycled Airlite stretch and our exclusive Furnace Graphene for a stretchy, comfortable feel throughout. Designed with a hidden split toe for a barefoot fit.
Features:
Men’s Wetsuit Boots
- Thickness - 3mm
- Smart Foam, partially recycled and premium lightweight.
- Exterior fabric - Airlite Recycler stretch now made from 100% recycled fibres
- Interior Fabric Type - Graphene Recycler Plus
- Hidden split toe neoprene boot
$149.00 -
O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black
Lightweight warmth, sensitivity of board feel under foot, grippy, TB3X comfort upper, durable supportive lower and heel- TB3-X /Durable Krypto Forefoot
- Glued & Blind Stitched Seams
- Anatomical Fit
- Anti-Flush Shin Strap
- Lightweight Sole
- 3mm
- Sizes 5 -13
- O'Neill Hyperfreak Series
$89.00 - TB3-X /Durable Krypto Forefoot
-
O'Neill Defender Split Toe 3mm Wetsuit Boot - Black
The O'Neill Defender 3mm boot is the remedy for Keeping the Cold Out. Ultraflex DS neoprene, Anti-Flush Shin Strap and PolarFlex liner all rolled into a durable and reliable winter asset.- UltraFlex DS Neoprene
- Glued Blind Stitched + Taped Seams
- Durable Outsole
- Anti-Flush Shin Strap
- 3mm
- PolarFlex Liner
- Sizes 5-14
$99.00 - UltraFlex DS Neoprene
-
Warm, comfortable and durable, these wetsuit booties are made from stretchy, 3mm 85% Yulex® natural rubber/15% synthetic rubber by polymer content, with an internal split-toe design for increased control and grip.
Best for water temperatures: 9°–13° C.
Features
- Made with Natural Rubber
- Stretchy 85% Yulex® natural rubber/15% synthetic rubber by polymer content; the natural rubber is Forest Stewardship Council® certified by the Rainforest Alliance; the synthetic rubber is chlorine-free
- Warm Thermal Lining
- Solution-dyed 95% polyester (51% recycled)/5% spandex thermal microgrid interior lining dries fast and offers excellent warmth and flex
- Recycled Polyester and Water-Based Glue
- Stretchy and durable solution-dyed 88% recycled polyester/12% spandex exterior lining; all fabrics laminated with solvent-free AquaA™ glue
- Fully Seam-Sealed
- 100% external seam sealing; all seams are triple-glued, blindstitched and 100% internally taped
- Split-Toe Design with Grippy Soles
- Internal split-toe design for better control and dexterity; diamond-grip, nonmarking soles provide increased traction
- Snug and Adjustable Fit
- Y-strap closure conforms to foot for a snug fit; microgasket at cuff opening prevents water entry
- Supporting the People Who Made This Product
- Fair Trade Certified™ sewn
$149.00 - Made with Natural Rubber
-
When you need the best performance boot possilbe. The Hyperfreak dipped boots are the favourites of the O'Neill staff and team. The dipped technology form fits to your feet to reduce the amount of water in your boot while surfing. Designed with a stretch entry to help you get them on and off.
- Dipped Envy Foam
- Liquid Dipped Sealed Seams
- Ultra comfortable
- 3mm
$139.00