FCS II

Brands
Colour
Size
FCS II

Set to become the new world standard in system technology and performance, FCS II is designed to accommodate all surfers. Regardless of their age demographic, surfing genre, or the boards and waves they’re riding. With an easy keyless clip in system means you can change your fins quickly in between waves. With a conversion set so you can use your old FCS fins.

  • $44.00
  • Fcs2 Carver Glass Flex Quad Rear

    Powerful, drawn-out turns. Excels on open face waves.

    OVERVIEW

    • Designed for powerful, drawn-out turns with added hold.
    • Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
    • Ideal for power surfers who like to push hard against their fins and and draw out their turns.
    • Two Quad Rear fins.

    IDEAL CONDITIONS

    Open face, down-the-line waves, particularly good in point and reef breaks.

    BOARD TYPES

    Recommended for boards with deep concaves and moderate-to-extreme rocker.

    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    FIN MATERIAL - Glass Flex

    Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

    FIN SIZE

    SMALL (55Kg - 70Kg)
    MEDIUM (65Kg - 80Kg)

    FIN SPECS: SMALL

    Base: 3.86" / 98mm
    Depth: 3.93" / 100mm
    Area: 11.07"² / 7140mm²
    Sweep: 33.2º
    Foil:  50/50

    FIN SPECS: MEDIUM

    Base: 4.14" / 105mm
    Depth: 4.21" / 107mm
    Area: 12.63"² / 8150mm²
    Sweep: 33.2º
    Foil: 50/50

    $59.00
  •  

    $89.00
  • Fcs2 Performer Glass Flex Tri 

    Reliable all-round fin for a diverse range of surfers, conditions and board types.
    Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
    Designed for surfers wanting a combination of speed and maneuverability with flow between turn

    Ideal Conditions.
    A wide range of conditions from beach breaks to point breaks.


    Board Types.
    Recommended for all board types.

    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    Fin Specs.

    Base: 4.25" / 108mm
    Depth: 4.43" / 112mm
    Area: 14.03"2 / 9054mm2
    Sweep: 33.7o
    Foil: Inside

    Glass Flex

    Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

    X-SMALL (Under 55Kg / 120 Lbs)
    SMALL (55Kg - 70Kg / 120 - 155 Lbs)
    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)
    X-LARGE (Over 85Kg / 190 Lbs)

     BASE ”BASE MMDEPTH ”DEPTH MMAREA ”AREA MM

    SWEEP

    DEGREE

    FOIL
    Performer X-S4.131054.310913.26855433.7IFT
    Performer SML4.251084.4311214.03905433.7IFT
    Performer MED4.371114.5511514.81955433.7IFT
    Performer LRG4.481144.6711815.581005433.7IFT
    Performer X-LGE4.591174.7812116.361055433.7IFT

    $89.00
  • Fcs2 Carver Neo Glass Small Quad Side

    Powerful, drawn-out turns. Excels on open face waves.

    OVERVIEW

    • Designed for powerful, drawn-out turns with added hold.
    • Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
    • Ideal for power surfers who like to push hard against their fins and and draw out their turns.
    • Two Quad Rear fins.

    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    FIN MATERIAL

    Neo Glass

    Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.

    Fin Specs

    Base: 3.86 in. 98 mm
    Depth: 3.93 in. 100 mm
    Area: 11.07 in.² 7140mm²
    Sweep: 33.2º
    Foil: 50/50

    $89.00
  • Fcs2 Carver Neo Glass Quad Rear Eco 

    Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.

    • Designed for a balance of speed, flow & response.
    • Well proportioned template with Inside Foil Technology (IFT).
    • Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
    • Medium Quad Rear 2 fin set.

     

    Ideal Conditions

    • A wide range of conditions from beach breaks to point breaks.

     

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for all board types.

     

    Fin Family

    • Performer: Find Balance. A balance of speed, flow & response.

    Size

    SMALL 55Kg - 70Kg 
    MEDIUM 65Kg - 80Kg 

    Neo Eco

    About Eco Blend
    FCS have made it their mission to minimise their footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

    Sustainability & Community
    Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.

     

    $89.00
  • $89.00
  • Fcs2 Accelerator Neo Glass Tri 

    Speed, flow and response with added control. Excels in critical conditions.

    Overview
    Designed for a balance of speed, flow & response with added control.
    Oversized, all-round template with a fuller tip.
    Ideal for surfers who like to attack the wave and perform aggressive turns.

    Ideal conditions
    A wide range of conditions, particularly good in critical overhead waves.

    Board types
    Designed to fit the fcs ii fin system.
    Recommended for performance shortboards with moderate-to-low rocker.

    Fin family
    Accelerator: find control. Speed, flow and response with added control.

    Sizes

    SMALL    55Kg - 70Kg 
    MEDIUM 65Kg - 80Kg 
    LARGE    75Kg - 90Kg 

    $119.00
  • FCS II Accelerator Neo Glass Eco Tri Fins

    FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.

    Neo Glass Ecoblend is a castor based bio-resin that has a low impact construction with high impact performance.

    Speed, flow and response with added control. Excels in critical conditions.

    Overview

    Designed for a balance of speed, flow & response with added control.

    Oversized, all-round template with a fuller tip.

    Ideal for surfers who like to attack the wave and perform aggressive turns.

     

    Ideal Conditions

    A wide range of conditions, particularly good in critical overhead waves.

     

    Board Types

    Designed to fit the FCS II Fin System.

    Recommended for performance shortboards with moderate-to-low rocker.

     

    Fin Family

    Accelerator: Find Control. Speed, flow and response with added control.

    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)

    Neo Eco

    About Eco Blend
    At FCS, have made it their mission to minimise their footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

    Sustainability & Community
    Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.

    $119.00
  • Fcs2 Carver Neo Glass Tri Fin

    The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open face waves. Constructed with 50% glass and bio-resin, the Neo Glass Eco Carver has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.

    • Designed for powerful, drawn-out turns with added hold.
    • Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
    • Ideal for power surfers who like to push hard against their fins and draw out their turns.

     

    Ideal Conditions

    • Open face, down-the-line waves, particularly good in point and reef breaks.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for boards with deep concaves and moderate-to-extreme rocker.

    Fin Family

    • Carver: Find Power. Powerful, drawn-out turns with added hold.

    Size

    • MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
      LARGE (75Kg - 90Kg / 165 - 200 Lbs)

    Neo Eco

    About Eco Blend
    At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

    Sustainability & Community
    Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.

     

    $119.00
  • Fcs2 Performer Neo Glass Eco Tri Fins

    The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.

    Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.

    • Designed for a balance of speed, flow & response.
    • Well proportioned template with Inside Foil Technology (IFT).
    • Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

     

    Ideal Conditions

    • A wide range of conditions from beach breaks to point breaks.

     

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for all board types.

     

    Fin Family

    • Performer: Find Balance. A balance of speed, flow & response.

    Size

    MEDIUM 65Kg - 80Kg 
    LARGE 75Kg - 90Kg

    Neo Eco

    • About Eco Blend
      At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

      Sustainability & Community
      Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm

    $119.00
  • Fcs2 Reactor Neo Glass Tri Evo Fin

    The ideal fin for surfers who like to perform fast, progressive turns. Best suited to hollow waves, and particularly good for beach breaks. The Reactors upright template allows for tighter, more acute directional changes. Constructed with 50% glass and bio-resin, the Neo Glass Eco Reactor has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.

    • Designed for speed and tight turns, with added tail release.
    • Upright template allows for tighter, more acute directional changes.
    • Smaller centre fin for increased pivot and tail release.
    • Ideal for surfers who like to perform fast, progressive turns.
    • Medium Tri (3) Fins

    Ideal Conditions

    • Suitable for hollow waves, particularly good for beach breaks.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for performance shortboards with moderate-to-low rocker.

    Size

    MEDIUM 

    • 65Kg - 80Kg 

    Fin Family

    • Reactor: Find Speed. Speed, tight turns & snaps.
    • Neo Eco

      About Eco Blend
      At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.

      Sustainability & Community
      Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.

    $119.00
  • Fcs2 Carver Performance Glass Quad Size - Small

    Powerful, drawn-out turns. Excels on open face waves.

    OVERVIEW

    • Designed for powerful, drawn-out turns with added hold.
    • Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
    • Ideal for power surfers who like to push hard against their fins and and draw out their turns.
    • Two Quad Rear fins.

    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    FIN MATERIAL

    PERFORMANCE GLASS

    Fin Specs

    Base: 3.86 in. 98 mm
    Depth: 3.93 in. 100 mm
    Area: 11.07 in.² 7140mm²
    Sweep: 33.2º
    Foil: 50/50

    $129.00
  • Fcs2 Carver Perfomance Glass Quad Side Small 

    Side byte set designed for 2+1 setups on longboards and SUP's.

    • Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
    • Neutral, well balanced template.
    • Glass Flex

      Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

      Ideal Conditions

    • A wide range of conditions from beach breaks to point breaks.

     

    Board Types

    • Designed to fit the FCS II Fin System.
    • Suitable for longboards, SUP's or as shortboard quad rears.

    $129.00
  • $129.00
  • Fcs2 Carver Performance Core Tri- Medium

    Elongated fin for performing long arc turns.
    High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
    Designed for power surfers who like to push hard against their fins and draw out their turns.

    IDEAL CONDITIONS
    Open face, down-the-line waves, particularly good in point and reef breaks.

    BOARD TYPES
    Recommended for boards with deep concaves and moderate-to-extreme rocker.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.



    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    FIN SPECS: MEDIUM

    Base: 4.47" / 113mm
    Depth: 4.54" / 115mm
    Area: 14.96"2 / 9650mm2
    Sweep: 37.0
    Foil: Flat

    $159.00
  • Fcs2 Reactor Performance Core Tri - Medium

    Fast reacting fin for performing tight radius turns.
    Upright template with flat foil on the side fins allows for acute directional changes.
    Designed for surfers who like to stay tight in the pocket and perform aerial maneuvers.
    Suits hollow waves and punchy beach breaks.
    Recommended for performance shortboards with moderate-to-low rocker.

    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    Performance Core

    FIN SPECS: MEDIUM

    Base: 4.34" / 110mm
    Depth: 4.57" / 116mm
    Area: 14.96"2 / 9650mm2
    Sweep: 31.9o
    Foil: Flat

    $159.00
  • $159.00
  • Fcs2 Accelerator Perfomance Core Tri - Medium

    Speed, flow and response with added control. Excels in critical conditions.

    Overview

    • Designed for a balance of speed, flow & response with added control.
    • Oversized, all-round template with a fuller tip.
    • Ideal for surfers who like to attack the wave and perform aggressive turns.

    Ideal Conditions

    • A wide range of conditions, particularly good in critical overhead waves.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for performance shortboards with moderate-to-low rocker.

    Fin Family

    • Accelerator: Find Control. Speed, flow and response with added control.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

    X-SMALL (Under 55Kg / 120 Lbs)
    SMALL (55Kg - 70Kg / 120 - 155 Lbs)
    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)
    X-LARGE (Over 85Kg / 190 Lbs)

    $169.00
  • Fcs2 Carver Performance Core Tri Fins

    Powerful, drawn-out turns. Excels on open face waves.

    Overview

    • Designed for powerful, drawn-out turns with added hold.
    • Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
    • Ideal for power surfers who like to push hard against their fins and draw out their turns.

     

    Ideal Conditions

    • Open face, down-the-line waves, particularly good in point and reef breaks.

     

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for boards with deep concaves and moderate-to-extreme rocker.

     

    Fin Family

    • Carver: Find Power. Powerful, drawn-out turns with added hold.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

    X-SMALL (Under 55Kg / 120 Lbs)
    SMALL (55Kg - 70Kg / 120 - 155 Lbs)
    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)
    X-LARGE (Over 85Kg / 190 Lbs)

    $169.00
  • Fcs2 Accelerator Perfomance Core Tri Fins

    Speed, flow and response with added control. Excels in critical conditions.

    Overview

    Designed for a balance of speed, flow & response with added control.
    Oversized, all-round template with a fuller tip.
    Ideal for surfers who like to attack the wave and perform aggressive turns.

    Ideal Conditions

    A wide range of conditions, particularly good in critical overhead waves.

    Board Types

    Designed to fit the FCS II Fin System.
    Recommended for performance shortboards with moderate-to-low rocker.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

    Fin Family

    Accelerator: Find Control. Speed, flow and response with added control.

    Size

    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)

    $174.00
  • Fcs2 Adriano de Souza Performance Core Tri Fins - Medium

    Adriano de Souza's signature fin. Allows for fast, controlled manoeuvres. Smaller centre fin allows for quick release.

    Designed for a wide range of conditions, particularly good in critical overhead waves.
    Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

    SIDE FIN:
    Base: 4.47" / 113mm
    Depth: 4.54" / 115mm
    Area: 14.96"² / 9650 mm²
    Sweep: 37°
    Foil: Flat

    CENTRE FIN:
    Base: 4.35" / 110mm
    Depth: 4.42" / 112mm
    Area: 14.20"² / 9160 mm²
    Sweep: 37°
    Foil: Flat

    $189.00
  • Speed, flow and response with added control. Excels in critical conditions.

    Overview

    LIGHTER CONSTRUCTION. SMOOTHER FEEL.

    The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

    • Designed for a balance of speed, flow & response with added control.
    • Oversized, all-round template with a fuller tip.
    • Ideal for surfers who like to attack the wave and perform aggressive turns.

    Ideal Conditions

    • A wide range of conditions, particularly good in critical overhead waves.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Recommended for performance shortboards with moderate-to-low rocker.

    Fin Family

    • Accelerator: Find Control. Speed, flow and response with added control.

    Performance Core Carbon

    Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

    The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

    The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

    X-SMALL (Under 55Kg / 120 Lbs)
    SMALL (55Kg - 70Kg / 120 - 155 Lbs)
    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)
    X-LARGE (Over 85Kg / 190 Lbs)

    $189.00
  • Fcs2 Al Merrick Performance Core Tri Fins

    Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.

    Overview

    • Al Merrick's template is designed for radical, progressive surfing.
    • The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.

    Ideal Conditions

    • Hollow steep waves, punchy beach breaks.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Performance boards with deep concaves and moderate-to-extreme rocker.

    Fin Family

    • Carver: Find Power. Powerful, drawn-out turns with added hold.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

    X-SMALL (Under 55Kg / 120 Lbs)
    SMALL (55Kg - 70Kg / 120 - 155 Lbs)
    MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
    LARGE (75Kg - 90Kg / 165 - 200 Lbs)
    X-LARGE (Over 85Kg / 190 Lbs)

    $189.00
  • FCS II CHANNEL ISLANDS TRI FINS

    A collaboration with Channel Islands Surfboards, the CI Upright is designed for speed and tight turns.

    Performance Core

    Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

    Overview

    • A collaboration with Channel Islands Surfboards, the CI Upright is designed for speed & tight turns.
    • A template that comes to life in punchy hollow waves, but can also suit conditions where you need the start up speed to get going.

    Ideal Conditions

    • Hollow steep waves, punchy beach breaks.

    Board Types

    • Designed to fit the FCS II Fin System.
    • Performance boards with deep concaves and moderate-to-extreme rocker.

    Fin Family

    • Reactor: Find Speed. Speed, tight turns & snaps.

    $189.95