Fcs2 Carver Performance Core Tri Fins - Acid Black
Fcs2 Carver Performance Core Tri Fins - Acid Black
Powerful, drawn-out turns. Excels on open face waves.
Overview
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Accelerator PC Carbon Med Tri Red
Oversized, all-round fin for a diverse range of surfers. Functional template with flat foil on the side fins delivering fast, controlled directional changes. Designed for surfers who like to attack the wave and surf with energy and power on critical parts of the wave.
Overview.
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.Ideal Conditions.
A wide range of conditions, particularly good in critical overhead waves.Board Types.
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.Fin Family.
Accelerator: Find Control. Speed, flow and response with added control.Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Medium 65kg - 80kg
Was:$209.00Now:$110.00Price:$110.00 -
Speed, flow and response with added control. Excels in critical conditions.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
FCS 2 Modern Keel Performance Glass
Upright keel template designed for traditional fish shapes.
Features
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$189.00 -
Fcs2 Performer Neo Glass Tri-Quad Eco Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Medium Tri-Quad (5 fin) set
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Neo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.
MEDIUM 65Kg - 80Kg
$199.00 -
Fcs2 Akila Aipa Twin + Stabiliser Performance Glass
The FCS II Aipa Twin+1 Fin Set, designed by Hawaiian shaper Akila Aipa, redefines the classic theory of the twin-fin design and transforms it into a more high-performance mindset. The Aipa twin's fiberglass material combined with a wide base and extra tall height gives this fin maximum drive, while the thinner tip offers release and spring off the top. This set performs great for lightweight surfers and pairs best with board designs featuring pulled in tails.$229.00 -
Fcs2 Modern Keel Twin Fins - White
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & Clear in Performance Glass, White in new PC AirCore material.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
Fcs2 Mark Richards Tri Fins - Lavender / Black
NEW SEASON COLOURS
MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.
Overview
- Mark Richard's famous twin template produces exceptional drive and speed.
- The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
$209.00 -
FCS II MARK RICHARDS FREERIDE TWIN FINS
Mark Richard's popular 4 x World Title twin template. Highly upright twin, making for an ultra loose feel with fast release.
Overview
The MR Freeride Twin fin takes us back to a time when Mark was reshaping the way surfers approached the wave. Cut from an old fibreglass skateboard deck, the original freeride fins paired with MR's revolutionary surfboard design changed the direction of surfboard design forever.
The Freeride twin sits very upright, making it super loose and free, with plenty of fast release off the top. The tip is more refined compared to his signature twin + 1, increasing the ability to pivot and turn on a dime.
Board Types
- Designed to fit the FCS II Fin System.
- Perfect twin fin for any retro-style board.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins have a rigid, highly responsive flex pattern that’s generally isolated towards the tip of the fin. This construction is widely used by advanced and pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$199.00 -
Fcs2 JS Power Twin Fin
High area twin fin set designed to be pushed hard through turns
Overview
- Limited Edition fin designed to compliment the JS Industries Black Baron Twin.
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
Fcs2 Julian Wilson Tri Fins - Army Camo
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.Overview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
Tri/Quad (5 fin) se
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
FCS II Performer Quad Rear Fin Set Glass Flex - Black
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Two Quad Rear fins.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$64.95