Torq Tec
Since 2012 Torq have developed a name for industry leading Epoxy technology, offering performance and durability for the premium recreational surfer. By using optimised techniques widely used in composite technologies the TEC range takes that one step further; creating a board with an incredible strength to weight ratio and torsional flex properties. The Torq Epoxy Composite uses a 3 x 6oz lay-up and carbon fibre tail reinforcement on the deck for maximum strength. The bottom features a carbon torsion strip to control flex and give a responsive spring from turns.
-
A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.
With 5 Futures fin boxes, the Summer 5 can be ridden as Quad or Thruster.
Dimensions Volume 5’6 x 21” x 2 3/8” 32.3 l 5’8 x 21 1/2” x 2 1/2” 35.2 l 5’10 x 22” x 2 5/8” 38.3 l 6’0 x 22 1/2” x 2 3/4” 41.8 l 6’2 x 23” x 2 7/8” 45.4 l $819.00 -
This is a true one board quiver. Up front you have a ‘fish’ like nose – wide through the 12” mark with an easy entry rocker and single concave. From the mid point back, the template narrows in a long curve into a rounded pin tail with a little more rocker under the back foot and a double concave to vee behind the fins.
This combination makes a board that paddles well and catches waves like a fish but also performs in more critical waves. Under your front foot the board is fast and accelerates quickly, with speed to burn. As you transfer your weight to your back foot the combination of the round pin and double concave makes the board sharp and responsive, easily capable of holding a high line in the barrel or deep gouging carves.
With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.
Dimensions Volume 5’8 x 20” x 2 3/8” 30.6 l 6’0 x 20 1/2” x 2 5/8” 35.7 l 6’4 x 21” x 2 3/4” 40.2 l 6’8 x 21 1/2” x 2 7/8” 44.9 l $829.00 -
Torq Tec Fish - White
ALL ABOUT SPEED AND FLOW.
In keeping with the original Torq Fish design, this is by far the fastest board in the TEC line. The Fish makes surfing down-the-line waves an effortless thrill ride – highline speed and wide eyed grins. We have re-worked the design a little with a modern tweak so you can keep all that speed under control with fluid direction changes and smooth rail to rail flow.
Designed for drawing long arcs on clean waves the Fish’s width and volume also makes it a great choice for more intermediate surfers looking for a shorter board. It’s equally at home in average surf, where the large planning area delivers performance in weaker waves.
DIMENSIONS VOLUME 5’6 x 19 3/4” x 2 5/16” 29.4 ltr 5’8 x 20” x 2 3/8” 31.5 ltr 5’10 x 20 1/4” x 2 7/16” 33.8 ltr 6’0 x 20 1/2” x 2 1/2” 36.2 ltr 6’2 x 20 7/8” x 2 5/8” 39.9 ltr 6’4 x 21 1/4” x 2 3/4” 43.7 ltr 6’6 x 21 3/4” x 3” 50 ltr $829.00 -
Torq Tec M2 - 6'6"
LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal’s are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.
Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.
Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.
DIMENSIONS VOLUME 6’6 x 21” x 2 1/2” 38.95 ltr 7’0 x 21” x 2 5/8” 43.9 ltr 7’6 x 21 1/2” x 2 3/4” 50 ltr 8’0 x 22” x 2 7/8” 55.7 ltr $979.00 -
Torq Tec Big Boy 23
This is a funboard on steroids! For this concept Torq used the overall plan shape of a minimal/funboard and boosted the width and volume along the length and foil. The result is a manageable, easy turning length with the paddle and float of a much larger board.
For improving surfers, this offers stability, paddle power and wave catching ability. For heavier surfers you'll find the float you need in a much shorter length. The single to double concave means you can still put this board on a rail.
With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.
Dimensions:
6'10 x 22 1/2 x 2 7/8 49.1 l
7'2 x 22 3/4 x 3 53.7 l
7'6 x 23 x 3 57.5 l
Technology:
Since 2012 Torq have developed a name for industry leading Epoxy technology, offering performance and durability for the premium recreational surfer. By using optimised techniques widely used in composite technologies the TEC range takes that one step further; creating a board with an incredible strength to weight ratio and torsional flex properties.
The Torq Epoxy Composite (TEC) uses a 3 x 6oz lay-up and carbon fibre tail reinforcement on the deck for maximum strength. The bottom features a carbon torsion strip to control flex and give a responsive spring from turns.
This ground breaking technology has been applied to our user friendly performance shapes used in the Torq PU/Polyester range, to produce a truly high performance range of surfboards with unrivalled durability.$999.00 -
Torq Tec Big Boy 23
This is a funboard on steroids! For this concept Torq used the overall plan shape of a minimal/funboard and boosted the width and volume along the length and foil. The result is a manageable, easy turning length with the paddle and float of a much larger board.
For improving surfers, this offers stability, paddle power and wave catching ability. For heavier surfers you'll find the float you need in a much shorter length. The single to double concave means you can still put this board on a rail.
With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.
Dimensions:
6'10 x 22 1/2 x 2 7/8 49.1 l
7'2 x 22 3/4 x 3 53.7 l
7'6 x 23 x 3 57.5 l
Technology:
Since 2012 Torq have developed a name for industry leading Epoxy technology, offering performance and durability for the premium recreational surfer. By using optimised techniques widely used in composite technologies the TEC range takes that one step further; creating a board with an incredible strength to weight ratio and torsional flex properties.
The Torq Epoxy Composite (TEC) uses a 3 x 6oz lay-up and carbon fibre tail reinforcement on the deck for maximum strength. The bottom features a carbon torsion strip to control flex and give a responsive spring from turns.
This ground breaking technology has been applied to our user friendly performance shapes used in the Torq PU/Polyester range, to produce a truly high performance range of surfboards with unrivalled durability.$999.00 -
The M2 has all the elements of a performance longboard in a much more compact package.
The center of the board is fairly straight and flat – this is the paddle and trim area, the functional section. At the front there’s a wide longboard nose with a single concave underneath – perfect for nose rides. From the mid-point back the template narrows into a round tail with a double concave vee underneath making this mini malibu super maneuverable off the tail.
A true Mini Malibu for all surfers in waves of 1ft to double overhead. The 4/3 set-up allows ultimate fin versatility.
Dimensions:
DIMENSIONS VOLUME 7’0 x 20 3/4” x 2 5/8” 43.3 ltr 7’6 x 21 1/4” x 2 3/4” 49.3 ltr 8’0 x 21 3/4” x 2 3/4” 54.7 ltr Technology:
$959.00 -
Torq Tec M2 - 7'6"
LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal’s are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.
Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.
Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.
DIMENSIONS VOLUME 6’6 x 21” x 2 1/2” 38.95 ltr 7’0 x 21” x 2 5/8” 43.9 ltr 7’6 x 21 1/2” x 2 3/4” 50 ltr 8’0 x 22” x 2 7/8” 55.7 ltr $1,029.00 -
Torq Tec M2 - 8'0
LIGHTWEIGHT, MID-LENGTH PERFORMANCE
Performance minimal’s are one of the funnest, most versatile boards you can own. Great for first waves, perfect for gliding small clean waves and with the paddle and pick up for larger or junkier surf.
Usually a performance minimal comes at a cost; the size of the board means to make it lightweight they are inherently weak and lose their responsive feel quickly or simply break. With the Torq TEC construction you get a lightweight board with all the strength of a much heavier one and much more responsivity.
Our combination of carbon strips on the top and bottom make these boards super lively and surf a lot shorter than their length.
DIMENSIONS VOLUME 6’6 x 21” x 2 1/2” 38.95 ltr 7’0 x 21” x 2 5/8” 43.9 ltr 7’6 x 21 1/2” x 2 3/4” 50 ltr 8’0 x 22” x 2 7/8” 55.7 ltr $1,049.00 -
Torq Tec Rusty Dwart White
This board literally walks on water. Better yet, runs on water. We’re talking easy paddling, a fast ride, effortless glide, and lip blasting vertical capabilities, all packed into one board. The Dwart takes the basic elements of a modern fish and fuses them with a few high-performance design techniques to take it to the next level. You want a board that does it all? The Dwart is the best yet.
TEC 5’6 x 20.25” x 2.32” - 29.2 ltr 5’8 x 20.5” x 2.42” - 31.8 ltr 5’10 x 20.75” x 2.5” - 34.3 ltr 6’0 x 21” x 2.56” - 36.6 ltr 6’2 x 21.25” x 2.63” - 39.1 ltr 6’4 x 21.5” x 2.72” - 42.1 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,049.00 -
This is a wolf in sheep’s clothing. This is a funboard on steroids: on paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive.
Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”.
- 6'6 x 21 3/4 x 2 3/4 (43.5L)
- 6'10 x 22 1/2 x 2 7/8 (49.1L)
- 7'2 x 22 3/4 x 3" (53.7L)
- 7'6 x 23 x 3 (57.5L)
ACT:
Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.
On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.
With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.
$1,199.00 -
The Torq Tec Horseshoe longboard will be your lucky charm when it comes to catching waves. It’s classic longboard shape with low-rocker, blended concave nose, tail and nose kick, 50/50 rails, and thruster fin box setup creates a board that is easy to glide and noseride. Square tail, this board performs well in small to medium sized waves and at all types of surf breaks.
Torq TEC, Torq Epoxy Composite offers our user friendly performance shapes in our most advanced epoxy lay-up to date. Using a mix of plain weave fibres and Carbon, these boards offer the best strength to weight ratio on the market. For mid-lengths and longboards the lay-up features a carbon stringer to the deck and bottom for a new level of torsional strength, plus 2 T-stringers on the longboards for additional responsive stiffness.
$1,299.00 -
Torq Tec The Don 9'
ALL THE TRICKS IN THE BOX
Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.
The Torq Don is such a design – stable on the nose, straight and fast through the middle and lively in the tail. But the added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.
LONGBOARD LAY-UP
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.
With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.
9’0 x 22 1/2” x 2 3/4”- 64.7 ltr
$1,149.00 -
Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.
The Don is stable on the nose, straight and fast through the middle and lively in the tail. The Don XL is higher volumed version of the Don for heavier surfers, slightly more nose oriented to enable more stable nose riding, but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.
9’6 x 22 3/4” x 2 7/8” - 71.5 ltr $1,199.00 -
Torq Tec The Don Nose Rider 9'1"
BEST OF BOTH WORLDS
The Don Nose Rider is a mix of our all round performance Don model with a more traditional Noserider. Up front is a wide nose, low entry rocker and teardrop concave – a sure fire combination for stability and tip time. But unlike a traditional noserider with soft rolled rails and vee bottom, the Don NR combines a hard rail and double concave vee in the tail of a more modern longboard.
This combination blends the best of a traditional noserider with the best of a modern longboard in a lightweight, super strong epoxy package. Turns out you can please all the people all the time.
DIMENSIONS 9’1 x 23” x 3 1/8” - 77 ltr $1,349.00 -
TORQ Act Chopper - Black Rails /Brushed Gray
The Chopper is a versatile shape – it’s a cruisey ride when the conditions suit, but give it a big open face and it’ll fire on all cylinders.
We’ve updated the shape with more forward volume for a more flowy, forward trim style of surfing from the front half of the board but with slightly more flip in the tail rocker for tighter turns and aggressive surfing. This is a very user friendly board that suits small wave days and pumping days as well.
With a 2+1 fin set-up it can be ridden as anything from glidey single fin, 2+1 or thruster.
DIMENSIONS 6’10 x 20 3/4” x 2 5/8” - 42.6ltr 7’2 x 21 1/4” x 2 3/4” - 47.5ltr 7’6 x 21 3/4” x 2 7/8” - 52.5ltr ACT Tech:
THE SCIENCE
Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.
On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.
With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.
$1,199.00 -
Torq Tec Rusty Egg Not - White
Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.
’10 x 20.75” x 2.74” - 43.8 ltr 7’0 x 21” x 2.8” - 46.5 ltr 7’2 x 21.25” x 2.88” - 49.6 ltr 7’4 x 21.5” x 2.96” - 53.1 ltr 7’6 x 21.75” x 3.05” - 57 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.
The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,199.00 -
Torq Tec The Don HP
Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.
Torq Tec's The Don range has 3 models which fill all of these needs – The Don is stable on the nose, straight and fast through the middle and lively in the tail. The HP model is a finer turned race car, but capable on the nose. The XL is higher volumed and nose oriented but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.
In Torq Tec's the Don all round longboard series, the HP model is the high performance model; a fine turned race car. It has a slimmed down outline and foil, lower rails and slightly more rocker making this a razor sharp blade for dynamic modern longboarding. Still capable on the nose when the right section stands up, the Don HP is a board for experienced longboarders to switch up to beast mode.
The combination of high performance shape and our lightweight cutting edge TEC construction creates a board that will surprise you with it’s performance and versatility.
Dimensions
9’1 x 21 7/8” x 2 13/16” 62.9 ltr Construction
$1,249.00 -
Torq Act Volume +
The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
DIMENSIONS 7’4 x 22” x 3” - 55.9 ltr 7’8 x 22 1/2” x 3 3/16” - 63.9 ltr 8’0 x 22 7/8” x 3 1/4” - 68 ltr $1,249.00 -
ALL THE TRICKS IN THE BOX
Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.
The Don is stable on the nose, straight and fast through the middle and lively in the tail. The Don XL is higher volumed version of the Don for heavier surfers, slightly more nose oriented to enable more stable nose riding, but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.
LONGBOARD LAY-UP
For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.
With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.
The Don XL 8’6 x 23 1/4” x 3 3/8” - 74.7 ltr 9’0 x 23 1/2” x 3 1/2” - 81.8 ltr 9’6 x 23 3/4” x 3 5/8” - 90.7 ltr $1,379.00 -
Torq Tec Delpero Pro Model - 9'1
EDOUARD DELPERO PRO
SMOOTH PROGRESSIVE LINES AND CRITICAL NOSERIDES
This is the model Edouard won his 2019 Surf Relik World longboard title on.
Edouard and Alain worked on that shape to find the perfect balance of modern and classic surfing on a Longboard.The aggressive outline and rocker will allow you to manœuvre the board at your highest potential while the lift will allow you to hold noserides in critical sections of the waves.
This model took Edouard on top of the 2019 Relik World Longboard Tour, 4 WSL European titles and a win at the WSL Cuervo surf Ranch Classic in 2021 with smooth progressive lines and critical noserides.
TEC - TORQ EPOXY COMPOSITE
For lengths of 8'6 and over we have introduced a T-stringer and UD carbon triple strips on the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.
With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.
DIMENSIONS
ACT / TEC 9’1 x 22 1/4” x 2 3/4” - 63.8 ltr $1,549.00 -
Torq Tec Delpero Classic Model - 9'2"
EDOUARD DELPERO CLASSIC
CROSS STEP WITH GRACE, TURN WITH EASE.
Alain Minvielle has extensive shaping experience in California and a fine appreciation for the flow and glide of the classic style. With Edouard’s input they have created a Classic shape inspired by the classic 60’s model of Longboarding (no edge) while adding some more modern bottom line to find the perfect cruiser with surprising manœuvrability.
The critical part of this design is in the rocker and volume distribution - the curve of the rocker will allow you to maintain noserides in the pocket while gliding in small conditions as much as in larger waves. Finally the unique distribution of volume through the board, from a thick nose to a thin tail, will allow you to cross step with grace and turn with ease.
DIMENSIONS
TEC 9’2 x 23” x 3 1/8” - 77.2 ltr $1,599.00