*Free standard shipping for orders over $200

Mini Mals & Funboards

Brands
Mini Mals & Funboards

The Mini Mal or funboard is the type of surfboard good for progressing a surfers tecnique whilst still allowing more manuverability than a standard longboard. the mini mal shape normally refers to boards over 7'6 with a traditional longboard shape, allowing for stable take offs and nose riding potential. A funboard is traditionally a longer board with sharp rails and tail allowing an individual to get used to the basics of take off and pumping without all the flash! A 7'6 funboard is ideal for the surfer graduating from a 9'6 or foam board, or a fast tracked beginner!!

 

  • With the Modern Highline we examined what novice-to-intermediate surfers need in a surfboard to help them get as much actual surfing experience as possible. To become a better surfer, catching waves and increasing your confidence is the key, so we designed this board to be very buoyant (easy to paddle), stable (easy to get to your feet), and easy to control (smooth turns & go where you want on a wave). Essentially, we built this board to re-define the first steps in surfing so people develop their skills quicker and maximise the enjoyment they get from riding waves.

    OUTLINE: The outline is the key to the Highline’s amazing stability. We basically took the middle section of a longboard, then tapered the nose to a semi-point and added a nice curved square tail, and by reducing the overall board length you maintain easier side-to-side turning.

    ROCKER: Considered flat, the low rocker means this board paddles very quickly onto waves, and will maintain its speed once you’re up and riding. In this case flat equals flow, and less effort required from the rider to get the board up and going.

    CONTOURS: Forward concave helps channel water efficiently across the flatter rocker, particularly when paddling and taking off. The back half of the board has a raised vee with double concave to offset the width, and allow for easier transitions from one rail to the other when performing turns.

    FOIL: There’s lots of volume along the full length of the foil, but enough taper through the nose to avoid that ‘boat-like’ feel. The rails are full, but still soft which makes them forgiving as you glide across the face and connect your turns together.

    PERFORMANCE: This model can be ridden shorter due to the extra width and higher volumes, which is a big advantage for beginner and intermediate surfers developing their turning skills. For better surfers, gear down into cruise mode before riding the Highline. It has a large sweet spot and offers a very fluid ride, especially in smaller, soft running beach and point waves.

    The X2 bamboo construction produces a light, durable surfboard with extra strength on the deck.

    Specifications.

    Technical information.

    Construction XB - Epoxy Bamboo.
    XB, representing ‘Epoxy Bamboo’ is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin bamboo veneer wrapped around a high-density EPS core. This construction method produces a light, extremely reliable surfboard that’s particularly strong on the deck. The durability and strength of XB surfboards make them ideal for surfers who like to travel and newcomers to the sport. XB surfboards feel solid under your feet, offer a smooth free flowing ride and will maintain their appearance for many years.

    Board Concave: Single Double Vee.
    Rail: Full.
    Surfer Skill Level: Beginner, Intermediate.
    Wave Height: 1-6ft Waves.

    $650.00
  • This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

     

    Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance.  Tri-fin set-up.

     

    Level-1 > Expert
    Wave Height-2 - 6ft+
    Dimensions-6’8” x 21” x 2 3/4”
    Recommended Rider Weight-40-80kg / 90-175lbs
    Volume-41.8 l

     

     

     

    FINS: 3 Fins supplied – Futures template F6

     

     

    CONSTRUCTION

     

    $699.00
  • With a shape that’s more today than yesterday, our modern “fish” design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too. The wide template also suits heavier surfers looking for a performance feel.

    Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose. Tune to your taste with Tri-Quad option.

    Level-2 > Expert
    Wave Height-2 - 6ft+
    Dimensions-7'2" x 22 1/2" x 3"
    Recommended Rider Weight-60-100kgs / 130-220lbs
    Volume-52.7 ltr

     

    FINS: 3 Fins supplied – Futures template F6

     

     

    CONSTRUCTION

     

     

     

    $719.00
  • This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.

    Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You'll find a board that feels shorter than it's length, delivering predictable handling and performance. Tri-fin set-up.

    Specs.
    Level - 1 > Expert.
    Wave Height - 2 - 6ft.
    Dimensions - 7'6" x 21 1/2" x 2 7/8".
    Recommended Rider Weight - 50-100kgs / 110-220lbs.
    Volume - 52.4 ltr.

    $739.00
  • The Modern Blackbird surfboard offers a stable, flowing ride for both men and women looking for a reliable, everyday fun shape. The Blackbird has a bigger ‘sweet spot’ compared to other funboards on the market which offers great stability for the progressing novice.

    Built using our XB (Epoxy Bamboo) construction which produces a light, extremely durable surfboard that’s particularly strong on the deck, and has beautiful aesthetic appeal.

    OUTLINE: Classified as a fun shape, the outline is full and generous from nose to tail providing maximum stability on small to medium size waves. The rounded nose keeps the area up front and allows the rider to comfortably shift their weight forward. The slight taper through the tail lets you maneuver the board with ease.

    ROCKER: Low, relaxed rocker makes this board paddle onto waves really well, accelerate from the take off with minimal effort, and allow for flowing turns on the face of the wave.

    CONTOURS: Vee-to-double concave bottom makes for easy rail-to-rail transitions and offers control when driving off the tail.

    FOIL: Designed with plenty of volume in the nose and tail, and out towards the rails, which provides added stability and makes this board simple to ride for surfers transitioning from the wastewater to unbroken waves.

    FINS: Fitted with FCS II plugs makes installing and removing fins quick and convenient. that’s easy to ride and control. Fins are included. 

    Specifications.

    Modern Blackbird Xb

    Technical information.

    Technical information.Construction: XB - Epoxy BambooXB, representing ‘Epoxy Bamboo’ is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin bamboo veneer wrapped around a high-density EPS core. This construction method produces a light, extremely reliable surfboard that’s particularly strong on the deck. The durability and strength of XB surfboards make them ideal for surfers who like to travel and newcomers to the sport. XB surfboards feel solid under your feet, offer a smooth free flowing ride and will maintain their appearance for many years.


    Board Concave: Vee Double.

    Rail: Neutral.

    Surfer Skill Level: Beginner, Intermediate, Advanced.Wave Height:1-8ft waves.

     

    $799.00
  • The Modern Blackbird range offers a flowing ride for the savviest of surfer, and our X-2 bamboo construction produces a light, extremely durable surfboard that's particularly strong on the deck.

    OUTLINE: Classified as a fun shape, the outline is full and generous from nose to tail providing maximum stability on small to medium size waves. The rounded nose keeps the area up front and allows the rider to comfortably shift their weight forward. The slight taper through the tail lets you manoeuvre the board with ease.

    ROCKER: Low-to-moderate rocker makes this board paddle onto waves really well, accelerate from the take off with minimal effort, and make flowing turns on the face of the wave.

    CONTOURS: Vee-to-double concave bottom makes for easy rail-to-rail transitions, and offers control when driving off the tail.

    FOIL: Designed with plenty of volume in the nose and tail, and out towards the rails, which provides added stability and makes this board simple to ride regardless of your skill level.

    FINS: The 7'0 and 7'6 models are set up as a thruster to really maximize maneuverability, while the larger sizes, 8'0 and 9'1 come with a single box fin setup plus two side FCS fins for a more controlled feel.

    The Blackbird has a bigger ‘sweet spot’ compared to other funboards on the market. This is a reliable board that will remain in your quiver for years.

    X-2 Epoxy
    X-2 Epoxy is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin wood veneer wrapped around a nigh density EPS core. This construction method produces a light, extremely reliable surfboard that's particularly strong on the deck. The durability and strength of X-2 Epoxy boards make them ideal for SUP's, surfers who like to travel or are new to surfing. X-2 Epoxy boards feel solid under your feet, perform incredibly well and maintain their appearance for many years.
    Technology Slx Img
     
    DIMENSIONS:

    NOTE: rider weight is based on board volume and intermediate rider skill level.
    LENGTH WIDTH THICK VOLUME FINS (supplied with board) APPROX WEIGHT RANGE
    7'0'' 21 1/2'' 2 3/4'' 47 ltr FCS M5 80kg / 176lb or less
    7'6'' 21 5/8'' 2 7/8'' 53 ltr FCS M5 85kg / 187lb
    8'0'' 22'' 3'' 61 ltr FCS GX/6" 90kg / 198lb +
    8'6'' 22 1/4'' 3 1/8'' 66 ltr FCS GX/6" 90kg / 198lb
    9'1'' 22 3/4'' 3 3/8'' 78 ltr FCS GX/7" ideal for all weights

     

    $795.00
  • Half longboard, half cruiser; the Modern Love Child offers limitless options in the water. This surfboard paddles exceptionally well, has plenty of turning ability off the tail, and will adapt as the conditions and your approach changes.

    Built using our XB (Epoxy Bamboo) construction which produces a light, extremely durable surfboard that’s particularly strong on the deck, and has beautiful aesthetic appeal.

    OUTLINE: The longboard outline up front creates a huge stable zone under the front foot and chest, which is great for catching waves early and riding forward towards the nose. The tapered pintail keeps the board maneuverable and adds control in bigger, steeper waves.

    ROCKER: The low rocker is designed to glide effortlessly into waves and maintain down-the-line speed and acceleration. Subtle lift in the tail rocker promotes smooth gliding turns on the face.

    CONTOURS: Concave in the nose creates lift when standing forward. Pronounced vee-double concave starts under the front foot and runs all the way out the back maintaining ample maneuverability on an otherwise wide, higher volume board.

    FIN: Three different fin configurations offer 3 types of performance. The single and 2 + 1 set-ups deliver a free-flowing ride while promoting longer lines. The quad offers a faster ride with tighter turning capacity.

    Technical Information

    XB, representing ‘Epoxy Bamboo’ is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin bamboo veneer wrapped around a high-density EPS core. This construction method produces a light, extremely reliable surfboard that’s particularly strong on the deck. The durability and strength of XB surfboards make them ideal for surfers who like to travel and newcomers to the sport. XB surfboards feel solid under your feet, offer a smooth free flowing ride and will maintain their appearance for many years.

    Board Concave: Vee Double

    Rail: Full

    Wave Height: 1-8ft Waves

     

    $795.00
  • This is a funboard on steroids! For this concept we’ve used the overall plan shape of a minimal/funboard and boosted the width and volume along the length and foil. The result is a manageable, easy turning length with the paddle and float of a much larger board.

    For improving surfers, this offers stability, paddle power and wave catching ability. For heavier surfers you’ll find the float you need in a much shorter length.  The single to double concave means you can still put this board on a rail.

    With 5 Futures fin boxes, the BigBoy 23 can be ridden as Quad or Thruster.

     

    DimensionsVolume
    6’10 x 22 1/2” x 2 7/8”49.1 l
    7’2 x 22 3/4” x 3”53.7 l
    7’6 x 23” x 3”57.5 l

    $949.00
  • The M2 has all the elements of a performance longboard in a much more compact package.

    The center of the board is fairly straight and flat – this is the paddle and trim area, the functional section. At the front there’s a wide longboard nose with a single concave underneath – perfect for nose rides. From the mid-point back the template narrows into a round tail with a double concave vee underneath making this mini malibu super maneuverable off the tail.

    A true Mini Malibu for all surfers in waves of 1ft to double overhead. The 4/3 set-up allows ultimate fin versatility.

    Dimensions:

    DIMENSIONSVOLUME     
    7’0 x 20 3/4” x 2 5/8”43.3 ltr
    7’6 x 21 1/4” x 2 3/4”49.3 ltr
    8’0 x 21 3/4” x 2 3/4”54.7 ltr

     

    Technology:

     

    $999.00
  • Perfect for entry level surfers, Softops provide excellent performance in addition to all of the lelments that a surfer needs to progress and develop their skill. Softops feature a soft EVA deck and rails for ease of use and safety.

    The Surftech Softop has been the industry standard for over 20 years and is designed for any level surfer from beginner to pro. The hard bottom provides the stiffness needed for fast down-the-line surfing while the soft deck is safe for the beginning rider. They are extremely durable, lightweight and guaranteed fun.

    Length: 8'0''
    Width: 21.5''
    Thickness: 3.13"
    Volume: 54L

    $1,049.00
  • Perfect for entry level surfers, Softops provide excellent performance in addition to all of the elements that a surfer needs to progress and develop their skill. Softops feature a soft EVA deck and rails for ease of use and safety.

    The Surftech Softop has been the industry standard for over 20 years and is designed for any level surfer from beginner to pro. The hard bottom provides the stiffness needed for fast down-the-line surfing while the soft deck is safe for the beginning rider. They are extremely durable, lightweight and guaranteed fun.

    Length: 8'4''
    Width: 23.13''
    Thickness: 3.25"
    Volume: 63L

    $1,099.00
  • A dream to ride, this premium fun board shape will turn heads on and off the water:

    – A longer performance board with features for both the aspiring  surfer and style conscious looking to fire up their surfing with  a fun and versatile surfboard for catching more waves.

    – Stable and performance orientated for fast tracking skills, ample nose area which adds paddle power for easy wave catching and drive in smaller waves.

    – The exotic double wing rounded pintail maximizes stability and shortens the radius of the turn giving a quicker and snappier riding board.­­

     

    Length

    Width

    Thickness

    Volume

    7'6''

    21 ¹/²

    2 ¹/²

    48.9

     

    $1,115.00
  • The Boss will have a big influence in any line-up when it comes to catching waves. Designed to be an affordable, user-friendly longboard that’s spec’d appropriately for easy riding with an emphasis on stability, control and smooth turning.

    Built using our XB (Epoxy Bamboo) construction which produces a light, extremely durable surfboard that’s particularly strong on the deck, and has beautiful aesthetic appeal.

    OUTLINE: While not too dissimilar to other longboards on the market, the Boss has a very balanced outline with loads of surface area up front for more capable nose riders, a parallel mid-section which creates a huge trimming zone, and enough taper in the tail to break a line and turn smoothly.

    ROCKER: Nice and low through the entry makes for fast paddling, which equates to more waves, tick! Relaxed through the middle, but with enough curve to promote a nice turning arc on the wave face. And finally, there’s a little extra lift in the tail to make turning easier for surfers moving up in their abilities.

    CONTOURS: While most performance longboards have complex concaves for rapid movement and response, the Boss has a subtle concave in the entry running into raised vee/double concave through the tail. This is designed to help promote stability when standing forward and deliver a feeling of pivotal sensitivity when turning right off the tail.
    FOIL: Designed with plenty of volume through the nose and tail, and also out towards the rails to provide added stability and make this board simple to ride regardless of your skill level.

    PERFORMANCE: This is the perfect entry level longboard due to the volume allocations, the ease at which it rides, and of course the price. However, more savvy surfers will tap into the true versatile nature of his board and its reliability across so many different types of waves. If you’re a traveller, or just like having one dependable longboard in your quiver, this is it.

    Specifications.

    Technical information.Technical information.Construction XB - Epoxy BambooXB, representing ‘Epoxy Bamboo’ is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin bamboo veneer wrapped around a high-density EPS core. This construction method produces a light, extremely reliable surfboard that’s particularly strong on the deck. The durability and strength of XB surfboards make them ideal for surfers who like to travel and newcomers to the sport. XB surfboards feel solid under your feet, offer a smooth free flowing ride and will maintain their appearance for many years.
    Board Concave: Vee DoubleRail: NeutralRider Skill Level: Beginner, Intermediate, AdvancedWave Height: 1-8ft Waves

     

     

    $1,150.00
  • This design is the first Nugget I shaped in 1994.

     

    Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”

     

    Geoff McCoy

     

     

     

    Dimensions:

     

    LENGTHWIDTHTHICKNESSVOLUME
    5’6202 5/834
    5’819 3/42 5/835
    5’1120 1/42 5/837
    6’120 3/42 3/441
    6’3212 3/443
    6’621 1/42 7/847
    6’821 1/42 7/849
    6’1021 1/22 7/851
    7’021 1/2355
    7’221 1/2356
    7’421 3/43 1/861
    7’621 3/43 1/863
    7’921 3/43 1/865
    8’0223 1/868

    $1,165.00
  • This design is the first Nugget I shaped in 1994. Proven to be a very versatile performer in a wide range of wave conditions from 1′ to 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”

    Geoff McCoy

    Built using the latest in EPS/Epoxy materials; the XF technology combines a lightweight EPS core with Biaxial Fibreglass Cloth and Epoxy Resin.

     

     Length 7’2 Width 21 1/2 Thickness 3         Volume 56

     Length 7’4 Width 21 3/4 Thickness 3 1/8   Volume 61

     Length 7’6 Width 21 3/4 Thickness 3 1/8   Volume 63

     

     

     

    $1,195.00
  • This design is the first Nugget I shaped in 1994. Proven to be a very versatile performer in a wide range of wave conditions from 1ft to 8ft all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”
    Geoff McCoy

    Flax fibre cloth is an engineered reinforcement fabric made from the bast of the flax seed plant. While flax fibre is one of the oldest cultivated fibres for textiles, it is only recently that its use as a fibreglass substitute has been acheived. Incorporating flax fibre cloth in the lamination reduces the use of regular glass by 1/3rd and adds a great earthy look and more importantly helps lower our carbon footprint.

    SR GreenPoxy 56 is an epoxy resin which has up to 56% of its molecular structure coming from plant origin. This percentage is function of the carbon origin contained in the epoxy molecule. The final rate of the mix bio-based carbon content will depend on the hardener choice.

    The manufacture of EPS foam does not involve the use of toxic isocyantes used in the production of regular surfboard blanks. Expanded Polystyrene (EPS) foam is light weight and has fantastic shock absorbing properties, making it ideal for surfboards. EPS foam has more buoyancy and flotation increasing paddling speed and maneuverability.

    The Surfboard Agency has teamed up with the first, independent 3rd party consumer-facing “eco-label” for boards, the ECOBOARD Project is focused on reducing carbon footprints, increasing the use (and reuse) of renewable, recycled and up-cycled inputs, and reducing toxicity within the surfboard manufacturing process.

    Length 7’0   Width 21 1/2  Thickness 3         Volume 55 ltr

    Length 7’6   Width 21 3/4  Thickness 3 1/8   Volume 63 ltr

    Length 8’0   Width 22        Thickness 3 1/8   Volume 68 lte

    $1,195.00
  • Designed for the bigger guy who is looking for a bigger shortboard (rather than the Mega Magic which is a shorter longboard). The Mini Mega Magic 2 in X2 Construction, is an updated version of the original Mini Mega Magic. The Mini Mega Magic is a mid-size version of our best selling Mega Magic. The Mini Mega Magic has more of a shortboard outline with a pulled in nose, and a lot of extra volume for maximum floatation yet it is still highly maneuverable.

    The Mini Mega Magic 2 in X2 Construction, is an updated version of the original Mini Mega Magic. The Mini Mega Magic is a mid-size version of our best selling Mega Magic. Sized between 6-7′ it is a sporty version of our Mega Magic. Designed for the bigger guy who is looking for a bigger shortboard (rather than the Mega Magic which is a shorter longboard). The Mini Mega Magic has more of a shortboard outline with a pulled in nose, and a lot of extra volume for maximum floatation yet it is still highly maneuverable.

    Features.
    The Mini Mega Magic has the famous Magic Model elements: our patented concave bottom, hard rails & lots of rocker. About 1/2-1″ thicker and 1-2″ wider than a standard Magic Model.

    The nose and tail of the Mini Mega Magic 2 have been pulled in just slightly to loosen the board up, we took out the step deck for a smoother transition from deck to rail creating a thinner rail for more sensitivity, feel and control.

    Our super durable X2 construction makes this model the perfect travel companion for surfers needing a board that will perform to high standards and also withstand some tough treatment.

    We Introduced FCSII fin boxes to the whole line up, snap in fins allow more versatility of fin selection on the fly.

    Board Concave: Magic Bottom.
    Rail: Full.
    Surfer Skill Level: Beginner, Intermediate, Advanced.
    Wave Height: 1 - 6ft.

    Specs.

     

    This construction is used exclusively in the NSP and Surf Series programs. It focuses on making the surfboard a durable as possible. The EPS core is reinforced with Fiberglass and then a top sheet of Top Sheet is added to enhance the overall strength of the board. All the layers are fused together using a special epoxy resin that helps to create what we think is the most durable performance orientated Surfboard construction available on the market globally right now.

    X2 Epoxy Construction

     

    $1,250.00
  • Aggressive high performance longboards that break the rules with quick and dynamic carving combined with traditional style for intermediate to advanced surfers:

     

    – The Hooligan design incorporates the responsiveness of a narrow shortboard tail and rail profiles to create a longboard that carves unlimited lines and hits the lip.

     

    – The advanced surfer will appreciate the loads of hollowed V under the feet to give quick rail-to-rail turns.

     

    – Show off all your surfing skills with a dynamic short board approach to rail to rail carving, then switch modes for classic nose riding and traditional longboard style.

     

    – Use a small single fin for small surf then add side biters and larger center fin as wave size and power increases.

     

    – Bring out your inner surf hooligan, break down the traditional surf style rules and mix things up on the wave with an aggressive modern and classic style!

     

    Shaper: Kym Thompson

     

     

     

    Fin Boxes:



      • Centre: Standard Box

     

      • Side Bytes: FCS II



    Dimensions:

     

    LengthWidthThicknessVolume
    8'4''222 ?/?61.3
    9'0''22 ¹/²369.8

     

    Material:

     

    Eco-friendly precision molded boards utilizing Coconut husks.

     

    –  Cocomat is an innovative, sustainable, proprietary and patent pending technology.

     

    –  NSP uses raw coconut husk fibers from naturally sustainable plantations with eco-friendly bio-resin.

     

    –  Visually unique board with an unmatched strength to weight ratio.

     

    –  Light to carry, easy to maneuver and even lighter to paddle.

     

    –  Responsive flex and strength gives confidence to push your limits in the conditions.

     

    $1,280.00
  • A good wave catcher, this mini-longboard bridges the gap between the a performance hybrid and a longboard. It has low entry rocker for trimming and enough tail rocker to stay high performance. Bottom goes from flat entry with concave, to vee out the tail. For surfers of all skill levels who want to ride a ton of waves without riding a longboard.

     

    ** This board does not come with fins.**

     

    Dimensions:

     

    LENGTHWIDTHTHICKNESSVOLUME (L)
    7'2"212.6342
    7'10"222.7554

     

     

     

    Tuflite-PC:

     



    Tuflite construction offers the most advanced quality construction suitable for the spectrum of surfboard models. Using only the highest quality EPS foam, epoxy and fiberglass materials, Tuflite surfboards are composite sandwich boards that boast the ultimate combination of performance and durability. Built off a shapers most renowned shape, each Tuflite represents the highest quality surfboard in its respective range. Working with nearly every major shaper in the world insures that we offer the optimal choice for every surfer in the water today.



     


     

    $1,325.00
  • For 2017 Walden is introducing the Mega Magic 2,  a new updated version of the Mega Magic… The Mega Magic has become one of best selling Walden surfboard designs ever, it shares the design aspects of the Magic Model but with added volume. This board has become so popular because its increased volume allows a rider to move to a shorter board while maintaining stability and float, yet it still manoeuvres with all the performance of the Original Magic Model.

    Volume is taken from the length and redistributed to the width and thickness which provides excellent float and stability while still maintaining the famous Magic Model performance.  The Mega is about 1/2-1″ thicker and 1-2″ wider than a standard Magic Model. The Mega Magic will float like a board that is 12-18″ longer. For the bigger guy that normally rides a 10’0, with the Mega he can ride a 9’0 without giving up float or stability.

    The Mega Magic 2 nose has been slightly pulled in – still excellent for nose riding, but the narrower nose will also perform better for more top to bottom riding.  Walden took out the step rails for a smoother transition from deck to rail creating a thinner rail for more sensitivity, feel and control.

    Introduced FCSII fin boxes to the whole line up, snap in fins allow more versatility of fin selection on the fly.

    Dimensions:

    LENGTH   WIDTH   THICK.   VOLUME    FINSAPPROX WEIGHT RANGE
    7'2''23 1/4''3 1/2''65.41 ltr7" Center / FCSII Performer sides85kg / 187lb or less
    8'0''23 1/2''3 3/4"78.93 ltr7" Center / FCSII Performer sides85kg+ / 187lb +
    9'0''24''4''98.5 ltr8" Center / FCSII Performer sidesideal for all weights
    9'6''24 1/4''4''106.2 ltr8" Center / FCSII Performer sidesideal for all weights

    Technology:


    Construction

    SLX construction produces a controlled flex pattern by combining the versatility of epoxy materials with the added advantage of reduced weight. All SLX boards have an EPS core with a high-grade timber stringer, which is laminated by hand using epoxy resign, biaxial fiberglass and a specialized construction process.

    Featuring a high strength-to-weigh ratio, and designs CNC milled directly from the shapers files. SLX boards feel light, responsive and are very sensitive under your feet. These boards are extremely versatile, easy to ride, and can be used in wide variety of conditions.

    Board ConcaveDesigned and Patented by Steve Walden, the Magic bottom is a complex design including chines and single to double concave features. Walden's specific combination and placements create a board that has great lift and speed but also initiates turns easily.
    Wave Height1-6ft Waves
    Surfer Skill Level Beginner, Advanced, Intermediate
    Rail
     This is a high volume rail.

    walden SLX Epoxy

    $1,395.00
  • For 2017 Walden is introducing the Mega Magic 2,  a new updated version of the Mega Magic… The Mega Magic has become one of best selling Walden surfboard designs ever, it shares the design aspects of the Magic Model but with added volume. This board has become so popular because its increased volume allows a rider to move to a shorter board while maintaining stability and float, yet it still manoeuvres with all the performance of the Original Magic Model.

    Volume is taken from the length and redistributed to the width and thickness which provides excellent float and stability while still maintaining the famous Magic Model performance.  The Mega is about 1/2-1″ thicker and 1-2″ wider than a standard Magic Model. The Mega Magic will float like a board that is 12-18″ longer. For the bigger guy that normally rides a 10’0, with the Mega he can ride a 9’0 without giving up float or stability.

    The Mega Magic 2 nose has been slightly pulled in – still excellent for nose riding, but the narrower nose will also perform better for more top to bottom riding.  Walden took out the step rails for a smoother transition from deck to rail creating a thinner rail for more sensitivity, feel and control.

    Introduced FCSII fin boxes to the whole line up, snap in fins allow more versatility of fin selection on the fly.

    Dimensions:

    LENGTH   WIDTH   THICK.   VOLUME    FINSAPPROX WEIGHT RANGE
    7'2''23 1/4''3 1/2''65.41 ltr7" Center / FCSII Performer sides85kg / 187lb or less
    8'0''23 1/2''3 3/4"78.93 ltr7" Center / FCSII Performer sides85kg+ / 187lb +
    9'0''24''3 7/8''98 ltr8" Center / FCSII Performer sidesideal for all weights
    9'6''24 1/4''4''112 ltr8" Center / FCSII Performer sidesideal for all weights

    Technology:


    Construction

    X-2 Epoxy is a multi-layered sandwich construction using epoxy resin, woven fiberglass and sheets of thin wood veneer wrapped around a Nanoweld EPS core. This construction method produces a light, extremely durable surfboard that's particularly strong on the deck.

    The durability and strength of X-2 Epoxy boards make them ideal for SUP's, surfers who like to travel, and heavy beach break conditions where other boards are prone to breaking. X-2 Epoxy boards feel solid under your feet and can take an absolute beating while maintaining their appearance for many years.

    Board ConcaveDesigned and Patented by Steve Walden, the Magic bottom is a complex design including chines and single to double concave features. Walden's specific combination and placements create a board that has great lift and speed but also initiates turns easily.
    Wave Height1-6ft Waves
    Surfer Skill Level Beginner, Advanced, Intermediate
    Rail
     This is a high volume rail.

     X-2 Epoxy is a multi-layered sandwich

    $1,395.00
  • If you’re not quite ready to “rip and shred” on a short board, nor are you apt to “cruise” on a long board, then the Hawaiian Pro Designs Egg is the perfect solution. This model is an “eggy” looking shape that allows the rider to trim high on the wave in the middle of the board or race down the line on the tail, whichever the rider prefers. The perfect board for beginner to advanced. 
     
    Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the entire surfing world. Donald Takayama was famous for his progressive designs that combined both traditional and high performance aspects into every board he made. The result was the best surfers sought out his boards to bring their surfing to the next level.  Donald Takayama and Surftech worked together for over 20 years before his passing. The relationship was built on trust and a commitment to produce quality product that would compliment the designs he so passionately created. It is an honor for Surftech to perpetuate Donald’s legacy by continuing to build the most iconic and proven designs.
     

    Dimensions:

    LENGTH      WIDTH      THICKNESS      VOLUME (L)
    7'2" 21.15" 2.7" 45.5

    Construction:

    Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.

     

    $1,480.00
  • If you’re not quite ready to “rip and shred” on a short board, nor are you apt to “cruise” on a long board, then the Hawaiian Pro Designs Egg is the perfect solution. This model is an “eggy” looking shape that allows the rider to trim high on the wave in the middle of the board or race down the line on the tail, whichever the rider prefers. The perfect board for beginner to advanced. 
     
    Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the entire surfing world. Donald Takayama was famous for his progressive designs that combined both traditional and high performance aspects into every board he made. The result was the best surfers sought out his boards to bring their surfing to the next level.  Donald Takayama and Surftech worked together for over 20 years before his passing. The relationship was built on trust and a commitment to produce quality product that would compliment the designs he so passionately created. It is an honor for Surftech to perpetuate Donald’s legacy by continuing to build the most iconic and proven designs.
     

    Dimensions:

    LENGTH      WIDTH      THICKNESS      VOLUME (L)
    7'2" 21.15" 2.7" 45.5

    Construction:

    Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.

     

    $1,480.00
  • The NEW Tuflite-PC 9'0'' Hydro Hull turns like a 8'6'', paddles like a 9'6'', and noserides like a 10'0''.  Bill says this is the "best longboard" he's ever designed. Historically, the Hydro Hull has been Bill's top selling board worldwide. This next generation Hydro Hull has a modern trim rocker with a single to double concave bottom and is made with Surftech's proprietary Tuflite-PC construction process.
    These features are complimented by a Carbon wrapped beveled entry rail, which provides forgiveness as well as performance .  The 2+1 fin configuration ia another proven Bill Stewart innovation that's stood the test of time. The New Hydro Hull is the all-purpose surfboard for those seeking more waves, more fun and more performance.

     

    *Fins not included

    LENGTH

    WIDTH

    THICKNESS

    VOLUME (L)

    9'0"

    23.4''

    3.1''

    71 L

    $1,675.00
  • Ultimate high performance noserider! This is definitely the most loved and sought after model in Donald’s range. Able to surf anything from one foot slop to overhead barrels, the In The Pink is definitely THE one longboard you must own. Perfect for the rider looking to own one longboard, or someone who is looking to become more accustomed to the nose, the In The Pink will have you loving your surfing again.
     
    Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the entire surfing world. Donald Takayama was famous for his progressive designs that combined both traditional and high performance aspects into every board he made. The result was the best surfers sought out his boards to bring their surfing to the next level.  Donald Takayama and Surftech worked together for over 20 years before his passing. The relationship was built on trust and a commitment to produce quality product that would compliment the designs he so passionately created. It is an honor for Surftech to perpetuate Donald’s legacy by continuing to build the most iconic and proven designs.
     

    Dimensions:

    LENGTH      WIDTH      THICKNESS      VOLUME (L)
    8'6" 22.5" 2.95" 64.3

    Construction:

    Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.

     

    $1,680.00