Stewart Hydro Hull Tuflite Vtech 9'0

Creative Army Jumbo Jet SLX

Creative Army Jumbo Jet SLX

Check out these real-life scenarios: You feel under volumed and the struggle of paddling is real. You catch the wave but the surfboard so unstable you can't get to your feet. Your home break is weak and small most of the time. You are a big human that can still surf really well but there's not a surfboard out there that has enough foam/volume for you. If you are relating to any of these scenarios then the Jumbo Jet is here to get you fully stoked.

The Jumbo Jet has a 2 + 1 fin set up that turns easily thanks to the smooth lines of the round tail. Complimented by a tucked edge in the tail and modern rocker the Jumbo Jet accommodates the surfer that wants to go down the line, hit the section, and move the board where ever it needs to go.

Throw in a little nose concave to help create lift for those heavier surfers allowing them to nose ride like a champ. The Jumbo Jet goes well in all conditions from small crappy beach breaks to beautiful points and steeper more challenging waves.

The shorter versions of the Jumbo Jet (7'2 and 8’0) will work a treat, they’re like the 'big guys' shortboard. These boards are for anyone that needs a little bit of help increasing their wave count. The extra volume allows you to paddle with ease, get in early, and give you more time to get to your feet. I'm so stoked on this board it's got my Dad back in the water in his Mid 60's after 10 years out due to injuries and it has got him frothing. Hope you get the same stoke.

Specifications

NOTE: Centre fin supplied with this board / Rider weight is based on board volume and intermediate rider skill level

LENGTH	WIDTH	THICK	VOLUME	FINS	APPROX WEIGHT RANGE
7'2	23 1/2"	3 1/2"	65.28ltr	FCS 7" CA Custom Fin (supplied)	85kg or less
8'0	23 11/16"	3 5/8"	78.05ltr	FCS 7" CA Custom Fin (supplied)	85kg +
9'0	24 1/16"	3 7/8"	97.05ltr	FCS 8" CA Custom Fin (supplied)	Ideal for all weights
9'6	24 1/4"	4"	106.36ltr	FCS 8" CA Custom Fin (supplied)	Ideal for all weights

Technical Information

Construction	SLX Epoxy
Board Contours	Modern Contours
Rail	Neutral Rail
Surfer Skill Level	Intermediate - Advanced
Wave Height	0-6ft

$1,295.00

Torq Tec The Don HP

Torq Tec The Don HP

Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.

Torq Tec's The Don range has 3 models which fill all of these needs – The Don is stable on the nose, straight and fast through the middle and lively in the tail. The HP model is a finer turned race car, but capable on the nose. The XL is higher volumed and nose oriented but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.

In Torq Tec's the Don all round longboard series, the HP model is the high performance model; a fine turned race car. It has a slimmed down outline and foil, lower rails and slightly more rocker making this a razor sharp blade for dynamic modern longboarding. Still capable on the nose when the right section stands up, the Don HP is a board for experienced longboarders to switch up to beast mode.

The combination of high performance shape and our lightweight cutting edge TEC construction creates a board that will surprise you with it’s performance and versatility.

Dimensions

9’1 x 21 7/8” x 2 13/16”

62.9 ltr

Construction

$1,249.00

Takayama Noah Kai Comp Tuflite 9'0

The NOAH COMP Tuflite V-Tech is a high-performance noserider. A board Donald had been making for Noah to use in contests. Wide nose and pulled in square tail, extra rocker in the nose and tail, this board was designed to excel in a variety of conditions. The go-to board for all of Donald's team riders when they enter a contest and the waves are constantly changing. Perfect for someone looking for a performance longboard that will handle any situation.

***Fins not included

$1,799.00

Aloha Chopped Log - Ecoskin

Aloha Chopped Log Ecoskin

- ECOSKIN Technology is a small step toward producing surfboards that are manufactured with more Earth friendly ethics.
Ecoskin surfboards are by no means sustainable but utilising less toxic materials during production we are taking steps to decrease our carbon footprint.
Paulownia is one of the fastest growing trees in the world, capable of growth rates of well over seven feet per year! Paulownia timber is perfectly suited as a sustainable alternative in surfboard production due to its lightweight and proportionately natural strength characteristics.
Some species of plantation Paulownia can be harvested for saw timber in as little as five years.
Once Paulownia trees are harvested, they regenerate from their existing root systems, earning them the name of the “Phoenix tree”.
Expanded Polystyrene (EPS) foam is very light and strong. EPS foam has more buoyancy and floatation increasing paddling speed and manoeuvrability
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs, decreasing the amount of harmful chemicals released into the environment.

Surf 10" Single fin
DECK: 2 x 6 oz + Wood BOTTOM: 1 x 6 oz + Wood
Foam Core: High Density EPS w/stringer
Resin: RESIN: Epoxy
Wood Skin/Sanded

Sizes

9'2 x 23 x 3 (72.04L)
9'4 x 23 1/8 x 3 1/8 (76.98L)
9'6 x 23 1/4 x 3 1/4 (82.03L)

$1,295.00

Torq Longboard 9'1

The Torq 9’1 is a more traditional noserider, focussed on stability and trim. It is excellent for both developing and skilled longboarders aiming for traditional style surfing in smaller waves. Low rockered a wide nose, these are super stable with tons of glide. The 9’1 has a harder rail through the tail with a double concave vee for manoeuvrability.

Dimensions	Volume	Rider Weight
9’1 x 23” x 3 1/8”	77 ltr	60-120 kg / 132-265 lbs

$949.00

Takayama Model T Woody 9'6

Takayama - Model T Woody 9'6" - Tuflite V-Tech

This design is the most well-rounded and versatile of Donald Takayama's classic retro line. With a broad, easy nosrideable nose, and wide, suprisingly loose tail, this board is what every one of Donald's team riders has their competitive quiver. With its 50/50 rails, single fin, square tail, this board is the perfect compliment to your quiver. The Model T's perfection lies in waves from shoulder high to ankle small.

***Fins not included

Length	Width	Thickness	Volume (L)
9'6"	23"	3.1"	82.2L

$2,299.00

O&E Log Dog Single Fin Soft Board 9'0

O&E Log Dog Single Fin Soft Board 9'0

Love your soft board but looking to ride it as traditional longboard? The Log Dog 9'0 is for you! With the same construction and template as the Ezi Fider this soft board featuring a single fin set up, will have you cruising down point breaks and hanging ten in no time!

Features:

Length: 9'0
Width: 24"
Thickness: 3 5/8"
Volume: 93L
Fins: 1 x 9" Soft PU
Fin Box: Single Bolt Thru - Interchangeable screw and plate
Rider Weight: <130k

$749.00

Torq Tec The Don XL

ALL THE TRICKS IN THE BOX

Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.

The Don is stable on the nose, straight and fast through the middle and lively in the tail. The Don XL is higher volumed version of the Don for heavier surfers, slightly more nose oriented to enable more stable nose riding, but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.

LONGBOARD LAY-UP

For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.

The Don XL
8’6 x 23 1/4” x 3 3/8”	- 74.7 ltr
9’0 x 23 1/2” x 3 1/2”	- 81.8 ltr
9’6 x 23 3/4” x 3 5/8”	- 90.7 ltr

$1,379.00

Renaissance 9'-4 Tuflite V Tech

Roger Hinds Renaissance Tuflite V-Tech - 9'4"

Surftech

Experience the best of the past with the top design elements of the present, experience “the Renaissance.” “Renaissance” is a French word for “rebirth”, or a new interest in something that has not been popular for a long time. Reaching back through the natural progression of his surfboard designs from his early years to the present, Roger Hinds has brought the best elements of each era forward with the Renaissance Model.

The Renaissance model revisits and revises the top longboard plan shape from the 1960’s; the height of the longboard era, and combines it with modern rocker, rail, and foil design elements to bring it into the present. The modern pulled down rail allows for smooth and easy rail to rail transitions. The advanced fine foil increases the speed and the glide which makes for fast clean surfing. The result is a one board longboard quiver. Pairing the right fin can greatly alter the performance of a surfboard. Roger has spent years perfecting finding testing fins shapes and sizes .

• 9'4" x 22" x 3.125" - 74.3L
• 10'0" x 22.75" x 3.375" - 88L

$2,099.00

Takayama Dt2 10'-0 Fcs2

Takayama DT-2 10'0"

There is no such thing as the perfect longboard, but if there was this would be darn close. Donald’s “all-rounder”. This board was designed with more focus on noseriding than the DT-1. With the ability to do it all. Turn, trim, noseride, you name it the DT-2 can do it. Working in waves from ankle high to well overhead, the DT-2 can be ridden and enjoyed in all conditions. This board could easily be a one-board quiver or just a trusty old friend you pull out when you want a board you know you can trust.

Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the surfing world. Takayama was famous for his progressive designs that combined both traditional and high-performance aspects into every board made.

• 9'2" x 22.2" x 3.0" - 68.1L
• 9'2" x 22.2" x 3.0" - 68.1L (2022)
• 9'6" x 22.75" x 3.1" - 74.8L
• 10'0" x 23.1" x 3.3" - 88.5L

$1,999.00

Torq Tec The Don XL

ALL THE TRICKS IN THE BOX

Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.

The Don is stable on the nose, straight and fast through the middle and lively in the tail. The Don XL is higher volumed version of the Don for heavier surfers, slightly more nose oriented to enable more stable nose riding, but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.

LONGBOARD LAY-UP

For lengths of 8'6 and over we have introduced a T-stringer and carbon stringer to the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.

With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.

The Don XL
8’6 x 23 1/4” x 3 3/8”	- 74.7 ltr
9’0 x 23 1/2” x 3 1/2”	- 81.8 ltr
9’6 x 23 3/4” x 3 5/8”	- 90.7 ltr

$1,379.00