Storage Racks

Brands
Colour
Size
Storage Racks

Surfboard racks, mal racks, longboard racks, sup racks, skateboard racks, bike racks, Kayak racks, fishing rod racks, ski and snowboard racks………. We have lots of storage racks for whatever your choice of toy or toys are. Wall mounted, ceiling mounted, free standing for display or storage we have racks to keep your gear safe and tidy up your garage, shed, living or bedroom or where ever you want to store your prized gear.

  • Curve Rack Naked Single Surfboard

     

    The Naked Surfboard rack takes the minimalist approach when it comes to storing and displaying your board. The idea behind the Naked Surfboard rack is that your board is a work of art, so the rack shouldn't distract from its beauty. We like to say that the Naked Surf is "barely there" which means it covers as little of your board as possible while still securely holding your board in place. If you're looking for a lightweight, affordable, and non-intrusive way to show off your favorite board then the Naked Surf is an excellent option. 

    While aesthetically minimalistic, the Naked Surf does not sacrifice structural integrity. The Naked Surf rack arms are made from a single piece of Aluminum that have been custom cut and bent. Each rack arm has two pre-drilled holes that allow you to mount up to two screws in a single stud. The combination of all-Aluminum construction with the 2-screw mounting pattern makes the Naked Surf incredibly sturdy for its size and appropriate for shortboard or longboard use. Lining the inside of each rack arm is a thick piece of felt. This felt provides a soft place to rest your board and prevents any long term pressure point distortion on your board. 

    Even though the rack is mostly hidden when displaying your board, we have still gone the extra mile to make what little that does show look awesome. 

     

    Features

    • 100% Aluminum - sturdy and never rusts!
    • Minimalist design shows off board and not rack
    • Soft felt padding to protect your board's rails
    • Strong enough to hold shortboards or longboards
    • Wood screws and gib anchors included
    • Supports boards up to 13.5kg

     

    Product Dimensions

    • 6.5" long
    • 3" along wall
    • 2.5" wide
    • 1.25" lip
    • 3/16" mounting holes
    • Aluminum construction

    $40.00
  • PRODUCT FEATURES:

    • Sturdy Rack made from Engineering Glass-Filled Reinforced Nylon
    • Rack Capacity = 1 Skateboard
    • Holds up to 18kg (39lbs) – Will accommodate any size skateboard or snow board
    • Can be mounted any distance apart to accommodate skateboards and longboardsor snow boards.
    • Storage or Display Rack for your Skateboards and Longboards will store your Skateboards and Longboards with the trucks either up or down.
    •Great way to Organize your Garage.

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms
    • 2 Rubber pads (For Board Protection)

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $59.00
  • PRODUCT FEATURES:

    • Sturdy Rack Manufactured from engineering reinforced glass-filled nylon resin
    • Rack Capacity = 1 Surfboard
    • Holds up to 18kg (39lbs)
    • Can be mounted any distance apart to accommodate all different length surfboards
    • Storage Rack for all Surfboards
    • Great way to Organize your Garage
    • Rack Protrudes from wall 440mm (17″)
    • 45 degree angle
    • Will Never Rust

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms
    • 2 Rubber Pads (For Board Protection)

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $69.00
  • PRODUCT FEATURES:

    • Sturdy Rack made from Engineering Reinforced Glass- Filled Nylon
    • Rack Capacity = 4 Fishing Rods and Reels Holds up to a 20kgs (40lbs) of fishing gear
    • Can be mounted at any distance apart to accommodate all different length rods
    • Great way to Organize your Garage
    • You can even add a 260mm (10 ¼”) shelf on top which makes it perfect for your tackle boxes or your other fishing gear.

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $69.00
  • PRODUCT FEATURES:

    • Sturdy Rack made from Engineering Reinforced Glass-Filled Nylon
    • Rack Capacity = 1 Nipper Boards or Mal Board
    • Holds up to a 18kg (39lbs)
    • Can be mounted at any distance apart to accommodate all different length boards
    • Storage or Display Rack for your Nipper Boards or Mals
    • Great way to Organize your Garage

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms
    • 2 Rubber Pads (For Board Protection)

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $69.00
  • PRODUCT FEATURES:

    • Sturdy Rack Manufactured from engineering reinforced glass-filled nylon resin
    • Perfect for displaying shortboards (Fine Rail Boards)
    • Rack Capacity = 1 Surfboard
    • Holds up to 18kg (39lbs)
    • Can be mounted any distance apart to accommodate all different length surfboards
    • Curl size 1 3/4″ – 15 degree angle
    • Rack Protrudes from wall 260mm (10.2″)

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms
    • 2 Rubber Pads (For board protection)

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $69.00
  • PRODUCT FEATURES:

    • Sturdy Storage Rack made from Engineering Reinforced Glass-Filled Reinforced Nylon

    • Rack Capacity = 1 Wakeboard or Kiteboard
    • Holds up to 18kg (39lbs)
    • Can be mounted any distance apart to accommodate all different length Wakeboards or Kiteboards.
    • Storage Rack for your Wakeboard or Kiteboard
    • Great way to Organize your Garage

    WHAT’S IN THE BOX:

    • 2 Interchangeable Sleeves
    • 2 Arms
    • 2 Rubber Pads (For Board Protection)

    Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.

    $69.00
  • Feature.

    Board racks for mounting to wall studs / van walls.
    Strong Aluminium construction.
    Foam padding protects your board.

    $69.00
  • The ANGLE Wall Rack is a super strong, heavy duty rack, that is purpose built to support extra large boards such as SUP and longboard surfboards. 

    The tight angle of the bend tucks boards into the wall, keeping stored boards out of the way and making for a great option where space is tight.

    Built from High-strength steel box tubing (5/8"x5/8") which is covered in quality cushioning foam, provides a safe and soft landing for your board. Sold in pairs.

     

    Features

    • high quality foam cushioning to protect your board
    • heavy duty steel box tubing construction
    • vinyl end caps
    • easy installation

     

    Details

    • sold in Pairs
    • arm extends at approx. 45 degrees, 18 inches (45.7cm) from wall 
    • will fit even the largest and widest of SUPs with rails up to 6" thick max weight 50lbs (23kg)
    • heavy-duty lag bolts included for secure installation

     

     

    Tips for installation

    Installation is easy just 4 bolts to screw into the wall, all parts included. 

    • check you have 2 racks, 4 bolts and end caps
    • always mount your rack to a sturdy surface, such as a wall stud
    • pre-drilling pilot holes will make screwing of lug bolts easier
    • included caps provide for a nice finished look to your rack, so you can secure your board safely, out of the way, and in style!

    $80.00
  • The Surfboard Ceiling Rack / SUP Ceiling Rack is made of powder-coated black galvanized steel with a protective weather resistant foam to keep your board safe and secure

    Utilising a 180 degree bend the COR Ceiling Rack securely stores and displays your Stand-Up Paddle Board, Longboards or Surfboards to the ceiling without the need for complicated straps or cables

    Padding is made from high quality weather resistant EVA Foam

    The COR ceiling rack will hold 1x stand up paddle board surfboard of any size, 2x longboards or 2-3x shortboards

    Can also be used as a wall mount

    Designed for both indoor and outdoor use

    Easy to install, all hardware is included

     

    Dimensions

    Rack opening is 26.5cm (10.5") so enough room to accommodate more than one board (depending on board thickness).

    Internal depth of the rack is 58cm (23")

    $85.00
  • Curve Surfboard Wall Rack Quad VERTICAL 

    4 Surfboard or 4 SUP Vertical Rack

     

    Vertical Surfboard Wall Rack for 4x Surfboards or SUP boards. Precision engineered from a multi stage anti corrosion process, this Curve steel vertical surfboard rack is super durable and strong. Surrounded in EVA cushioning foam to provide soft & secure vertical storage for up to 4 surfboards, you know you are giving your quiver the best protection while also looking pretty damn fine! Ready to install right out of the box, with limited assembly required

    Compatible with shortboards, longboards and SUPs

     

    Features

    • multi stage anti-corrosion process
    • super strong & durable steel construction
    • powder coated in black
    • protective EVA foam padding and end caps for board protection
    • easy installation with limited assembly required
    • includes one rack plus installation screws
    • stores 4 shortboards, longboards or SUPs (up to 6" thick)
    • arm length 45cm [17.5"], base height 73cm [29"], space between arms 17cm [7"] 

    $90.00
  • Ocean And Earth Wooden Wall Rack 

    Turns your board into a display piece

    Fits: 1 Surfboard

    Easily mounted

    Board racks for mounting to wall
    Foam padding protects your board

    $109.00
  • O&E Invisible Surfboard Display Rack - Horizontal

    Make your board a show piece in your house with the Invisible Wall Display Surfboard Rack. Made from polished invisible acrylic and supported by cushioned bumpers to keep your board scratch free, this horizontal surfboard rack will show case that prized stick with memories.

    Features:

    • Fits 1 surfboard

    • Height 335mm x Depth 190mm x Width 35mm

    • Horizontal or angled display rack

    • Polished invisible Acrylic

    • Suits all board lengths to weight of 10kgs 

    • Cushioned bumpers to protect your board

    $126.00
  • SUP Wall Rack Double Aluminium by Curve

    NZ Double SUP Racks 2 Stand Up Paddle Board Wall Racks (pair)

    Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

    Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

    Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

    Super durable and super strong these racks will take a board that weighs 15kg no problem.

    Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 2 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

    Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

    Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

    Capacity easily supports 2 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

     

    Features

    • super resistant to rust and corrosion
    • super strong & durable aluminium construction
    • sleek sliver finish
    • protective EVA foam padding for board protection
    • easy installation - arms insert with a simple push pin
    • set includes pair of two racks plus installation screws
    • stores 2 Stand Up Paddle Boards
    • arm length 59cm, space between arms 20cm
    • Curve 12 month guarantee

    $127.00
  • Curve Surfboard Wall Rack Triple Aluminium 

    Triple Surfboard Racks 3 Surfboard Wall Racks (pair)

     

    Precision engineered made from rust-proof aluminium, this pair of Curve Quad Surfboard racks for 3 Surfboards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

    Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

    Get organised Organise your surfboards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

    Super durable and super strong these racks will take a board that weighs 10kg no problem.

    Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 surfboards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

    Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.  [note images are out-dated and show straight arms which is not accurate - arms on shipped item are at 10 degree angle]

    Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

    Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

    Capacity easily supports 3 surfboards up to 10kg each with fins left on (plenty of space between levels)

    Got less than 3 boards? check out our double surfboard rack options...

     

    Features

    • Super strong & durable aluminium construction
    • Super resistant to rust 
    • Sleek sliver finish
    • Protective EVA foam padding for board protection
    • Easy installation - arms insert with a simple push pin
    • Set includes pair of two racks plus installation screws
    • Stores 3 surfboards
    • Arm length 48cm [19"], base height TBAcm [TBA"], space between arms 17cm 
    • Curve 12 month guarantee

    $140.00
  • O&E Invisble Surfboard Display Rack - Vertical

    Make your board a show piece in your house with the Invisible Wall Display Surfboard Rack. Made from polished invisible acrylic and supported by cushioned bumpers to keep your board scratch free, this vertical surfboard rack will show case that prized stick with memories.

     Features:

    • Fits 1 surfboard

    • Vertical display rack 

    • Polished invisible Acrylic

    • Choice of 2 tail attachments included

    • Suits all board types with or without fins

    • Adjustable rail arms on centre bracket to suit boards 17.5" tp 23." wide

    • Suits all board lengths to weight of 10kgs

    $145.00
  • So what's the best way to store your surfboard? The Nice Rack Modular Rack was developed to adapt to the amount of surfboards needing storage as you surf more waves and the number of surfboards in your quiver grows. The Nice Rack concept is simple - provide quality surfboard wall racks which are affordable, easy to install, and can be easily expanded by snapping together - so no matter how many surfboards you have - you can easily grow your racks to keep up with your surfboard collection. 

    While it sounds a simple concept, it is interesting to note that Nice Rack is the only expandable rack system on the market.

    This means the Modular Surfboard Rack is the solution for storing your boards indoors and out. Whether you want to store your board in the garage, or display it proudly in your room, or even outside, this modular rack should be your go-to.

    The Quad Rack holding four boards is not the limit - you can stack as many Nice Rack Modular Racks together as the height of your wall will alllow.

    When you're ready to store and protect your quiver in a truly functional and expandable set-up, Nice Rack Modular Wall Racks are the way to go!

    Features:

    • Surfboard Wall Rack System allows for storage of SURFBOARDS, SNOWBOARDS, KITEBOARDS or WAKEBOARDS in your garage, or home.
    • a great way to free up floor space while at the same time providing efficient and easy to use storage for your boards, keeping them safe from dings and damage.
    • Nice Rack is the only expandable rack system on the market.
    • add extra surfboard racks to your existing Nice Rack with the simple connection method which makes it a 'snap'. Nice Racks are a patented two-piece modular design which lock together and maximize space while remaining stylish. Unlimited tier expansion means the only limit to the capacity of how many boards you store in your rack - is the height of your wall. Go up to 8 boards...... or more!
    • top and bottom wall mount end caps complete the installation and give the Nice Rack a finished look.
    • each rack is made of high quality 100% RECYCLED ABS Plastics - lightweight but also very strong.
    • each arm and wall mount is covered with 1/4 inch thick medium density foam tape protecting boards from dings and scratches.
    • the two piece system is designed to maximize strength, and is also relocatable so it can be easily moved to another wall.
    • the Nice Rack system caters for surfboards under 11.5kg in weight. Stand-up paddle boards or longboards over 9' weighing more than 11.5kg are not recommended.
    • Made in USA

    Technical Specifications:

    • each wall mount is 8.0 inches (20.3cm) long so you'll need 32 inches (81.2cm) of wall space to install the 4 set of racks, plus at least 8 to 10 inches (20.3cm - 25.4cm) above the top set of racks to allow enough space to place a board on the top rack.
    • when wall mounts are snapped together there is 7.5 inches (19cm) of space between the arms.

    • supporting arms are16 inches (40.6cm) long and angle up at 22%.
    • each wall rack weighs 0.6kg

    $59.00
  • Vertical stacking - Fits 1-4 boards.
    Heavy Duty Metal Frame with 50mm protective EVA padded sleeves.

    Customize your surfboard storage, use multiple Stack Rax and Ocean & Earth
    padded EVA Mats (sold separately) to store more than 4 boards.

    $149.00
  • SUP Wall Rack Triple Aluminium by Curve

    NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)

    Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.

    Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!

    Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!

    Super durable and super strong these racks will take a board that weighs 15kg no problem.

    Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!

    Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.

    Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.

    Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)

    Features

    • super resistant to rust and corrosion
    • super strong & durable aluminium construction
    • sleek sliver finish
    • protective EVA foam padding for board protection
    • easy installation - arms insert with a simple push pin
    • set includes pair of two racks plus installation screws
    • stores 3 Stand Up Paddle Boards
    • arm length 59cm, base height 54cm, space between arms 20cm
    • Curve 12 month guarantee

    $150.00
  • Thule Wall Hanger

    Get your gear off the floor with at Thule Wall Hanger

    • Load capacity 40 kg.
    • Does not fit the Thule EasyFold bike carrier.

    $159.00
  • Surfboard Wall Rack Quad NZ by Curve

    precision engineered from a multi stage anti corrosion process, this pair of Curve steel surfboard racks are super durable and super strong. Surrounded in EVA cushioning foam to provide soft & secure storage for up to 4 surfboards, you know you are giving your quiver the best protection while also looking pretty damn fine!

    there are two options for installing racks, they can be installed horizontally to hold surfboards on a wall, or they can be installed vertically to support surfboards floor standing.

    got more than 4 boards? add the double rack for storage of 6 boards.... or join 2 quad rack sets together for storage of your 8 board quiver - finding the right board to match conditions has never been easier!

    ready to install right out of the box, with limited assembly required

    compatible with shortboards and longboards up to 11kg

    Features

    • multi stage anti-corrosion process
    • super strong & durable steel construction
    • powder coated in black
    • protective EVA foam padding and end caps for board protection
    • easy installation with limited assembly required
    • set includes pair of two racks plus installation screws
    • stores 4 surfboards or longboards up to 11kg each
    • arm length 48cm, base 77.5cm, space between arms 15cm
    • Curve 12 month guarantee

     

    note new model differs from photo - and does not feature 'kicks' at the end of each arm

    some photo's show 2x quad sets joined together. if you have 8 boards to store, you will need to purchase 2x quad sets.

    $160.00
  • Rhino Wall Hanger - Large

    Keep your home and workspace clear of clutter with the Large Rhino-Rack Wall Hanger. The Wall Hanger allows you to mount and store your luggage box, tray, kayak or anything up to 80kg securely to the wall saving floor space. The Wall Hanger can be mounted to suit most wall types including brick, plasterboard and wood.

    A tie down strap is also included to secure your load. The Wall Hanger features steel tubes that are electroplated and powder coated to resist corrosion when used outdoors.

    • Incredible load rating of 80kg 

    • Electroplated and powdercoated steel tube frame for potential outdoor use

    • The padded cover is UV stabilised, however, premature fading will occur outdoors compared to indoor use

    • Included is a tie down strap to securely strap your gear in place

    • Keeps your garage, outdoor area or work space clutter free

    • Can mount Luggage Box, Pioneer Tray, Kayak, Canoe, SUP, Surfboard or almost anything you can imagine

    • The Wall Hanger comes with all the necessary parts to assemble and mount

     

    $184.00
  • Curve SUP & Surfboard Multi T Ceiling Rack 50kg

    Stores 4x SUP or multiple Surfboards 

    Run out of wall space in your garage?

    No worries, this Ceiling "T" Rack from Curve means you can now utilise your ceiling for board storage - up to 25kg each side. 

     

    Features

    • pair of padded 2x sided racks 

    • up to 4x SUPs or multiple surfboards to max 50kg [25kg max per side]

    • arms extend 63cm each side of centre support

    • 38cm of clearance between arms and ceiling

    • padded arms

    • heavy duty aluminium tubing that is both super strong and super resistant to rust

    • all hardware included

     

     

    Product Dimensions

    • maximum boardheight = 15" [38cm]
    • maximum board width = 36" [92cm]
    • arm length = 25" [63cm]
    • rack width with both arms attached = 50" [127cm]
    • 50kg capacity [25kg each side]

    $199.00
  • Horizontal stacking - Fits 4 boards (with fins) or up to 8 boards (without fins)

    Vertical stacking - Fits 1-8 boards (with fins) or up to 16 boards (without fins)

     

    Heavy Duty Metal Frame

    50mm protective EVA padded sleeves

    W 780mm X D 500mm (ASSEMBLED) X2

    $249.00
  • The perfect way to store a roofbox. Works just as perfectly for kayaks, stand up paddle boards and surfboards.

    Features
    -To be mounted on garage ceiling
    -Lifts load easily with help of winch
    -Lifts load up to 100kg
    -Works perfectly with roof boxes, kayaks, surfboards etc

    $399.00