Thule Wall Hanger
Description
Thule Wall Hanger
Get your gear off the floor with at Thule Wall Hanger
- Load capacity 40 kg.
- Does not fit the Thule EasyFold bike carrier.
You may also like ...
-
PRODUCT FEATURES:
• Sturdy Rack Manufactured from engineering reinforced glass-filled nylon resin
• Rack Capacity = 1 Surfboard
• Holds up to 18kg (39lbs)
• Can be mounted any distance apart to accommodate all different length surfboards
• Storage Rack for all Surfboards
• Great way to Organize your Garage
• Rack Protrudes from wall 440mm (17″)
• 45 degree angle
• Will Never RustWHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
PRODUCT FEATURES:
• Sturdy Rack made from Engineering Reinforced Glass-Filled Nylon
• Rack Capacity = 1 Nipper Boards or Mal Board
• Holds up to a 18kg (39lbs)
• Can be mounted at any distance apart to accommodate all different length boards
• Storage or Display Rack for your Nipper Boards or Mals
• Great way to Organize your GarageWHAT’S IN THE BOX:
• 2 Interchangeable Sleeves
• 2 Arms
• 2 Rubber Pads (For Board Protection)Rack can be mounted to any wall material, drywall, tile, stucco/plaster, wood, brick or concrete.
$69.00 -
So what's the best way to store your surfboard? The Nice Rack Modular Rack was developed to adapt to the amount of surfboards needing storage as you surf more waves and the number of surfboards in your quiver grows. The Nice Rack concept is simple - provide quality surfboard wall racks which are affordable, easy to install, and can be easily expanded by snapping together - so no matter how many surfboards you have - you can easily grow your racks to keep up with your surfboard collection.
While it sounds a simple concept, it is interesting to note that Nice Rack is the only expandable rack system on the market.
This means the Modular Surfboard Rack is the solution for storing your boards indoors and out. Whether you want to store your board in the garage, or display it proudly in your room, or even outside, this modular rack should be your go-to.
The Quad Rack holding four boards is not the limit - you can stack as many Nice Rack Modular Racks together as the height of your wall will alllow.
When you're ready to store and protect your quiver in a truly functional and expandable set-up, Nice Rack Modular Wall Racks are the way to go!
Features:
- Surfboard Wall Rack System allows for storage of SURFBOARDS, SNOWBOARDS, KITEBOARDS or WAKEBOARDS in your garage, or home.
- a great way to free up floor space while at the same time providing efficient and easy to use storage for your boards, keeping them safe from dings and damage.
- Nice Rack is the only expandable rack system on the market.
- add extra surfboard racks to your existing Nice Rack with the simple connection method which makes it a 'snap'. Nice Racks are a patented two-piece modular design which lock together and maximize space while remaining stylish. Unlimited tier expansion means the only limit to the capacity of how many boards you store in your rack - is the height of your wall. Go up to 8 boards...... or more!
- top and bottom wall mount end caps complete the installation and give the Nice Rack a finished look.
- each rack is made of high quality 100% RECYCLED ABS Plastics - lightweight but also very strong.
- each arm and wall mount is covered with 1/4 inch thick medium density foam tape protecting boards from dings and scratches.
- the two piece system is designed to maximize strength, and is also relocatable so it can be easily moved to another wall.
- the Nice Rack system caters for surfboards under 11.5kg in weight. Stand-up paddle boards or longboards over 9' weighing more than 11.5kg are not recommended.
- Made in USA
Technical Specifications:
- each wall mount is 8.0 inches (20.3cm) long so you'll need 32 inches (81.2cm) of wall space to install the 4 set of racks, plus at least 8 to 10 inches (20.3cm - 25.4cm) above the top set of racks to allow enough space to place a board on the top rack.
-
when wall mounts are snapped together there is 7.5 inches (19cm) of space between the arms.
- supporting arms are16 inches (40.6cm) long and angle up at 22%.
- each wall rack weighs 0.6kg
$59.00 -
The ANGLE Wall Rack is a super strong, heavy duty rack, that is purpose built to support extra large boards such as SUP and longboard surfboards.
The tight angle of the bend tucks boards into the wall, keeping stored boards out of the way and making for a great option where space is tight.
Built from High-strength steel box tubing (5/8"x5/8") which is covered in quality cushioning foam, provides a safe and soft landing for your board. Sold in pairs.
Features
- high quality foam cushioning to protect your board
- heavy duty steel box tubing construction
- vinyl end caps
- easy installation
Details
- sold in Pairs
- arm extends at approx. 45 degrees, 18 inches (45.7cm) from wall
- will fit even the largest and widest of SUPs with rails up to 6" thick max weight 50lbs (23kg)
- heavy-duty lag bolts included for secure installation
Tips for installation
Installation is easy just 4 bolts to screw into the wall, all parts included.
- check you have 2 racks, 4 bolts and end caps
- always mount your rack to a sturdy surface, such as a wall stud
- pre-drilling pilot holes will make screwing of lug bolts easier
- included caps provide for a nice finished look to your rack, so you can secure your board safely, out of the way, and in style!
$80.00 -
Vertical stacking - Fits 1-4 boards.
Heavy Duty Metal Frame with 50mm protective EVA padded sleeves.Customize your surfboard storage, use multiple Stack Rax and Ocean & Earth
padded EVA Mats (sold separately) to store more than 4 boards.$149.00 -
SUP Wall Rack Triple Aluminium by Curve
NZ Triple SUP Racks 3 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve triple SUP racks for 3 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 3 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity easily supports 3 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)Features
- super resistant to rust and corrosion
- super strong & durable aluminium construction
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 3 Stand Up Paddle Boards
- arm length 59cm, base height 54cm, space between arms 20cm
- Curve 12 month guarantee
$150.00 -
SUP Wall Rack Quad Aluminium NZ by Curve
Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely unnecessary!
Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity Easily supports 4 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)Got less than 4 boards? Check out our triple and double SUP rack options...
Features
- super strong & durable aluminium construction
- super resistant to rust
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 4 Stand Up Paddle Boards
- arm length 68cm , base height TBAcm ["], space between arms 30cm
- Curve 12 month guarantee
$199.00 -
Horizontal stacking - Fits 4 boards (with fins) or up to 8 boards (without fins)
Vertical stacking - Fits 1-8 boards (with fins) or up to 16 boards (without fins)
Heavy Duty Metal Frame
50mm protective EVA padded sleeves
W 780mm X D 500mm (ASSEMBLED) X2
$249.00 -
Ocean And Earth Wooden Wall Rack
Turns your board into a display piece
Fits: 1 Surfboard
Easily mounted
Board racks for mounting to wall
Foam padding protects your board$109.00 -
Curve Surfboard Wall Rack Quad Aluminium
Quad Surfboard Racks 4 Surfboard Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve Quad Surfboard racks for 4 Surfboards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised Organise your surfboards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 10kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 surfboards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.Angled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall. [note images are out-dated and show straight arms which is not accurate - arms on shipped item are at 10 degree angle]
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity easily supports 4 surfboards up to 10kg each with fins left on (plenty of space between levels)Features
- super strong & durable aluminium construction
- super resistant to rust
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 4 surfboards
- Curve 12 month guarantee
Specs
- arm length 45cm
- base height 73cm , arms 17cm
please note: images show straight arms which is not accurate - arms on the shipped item are at a 10 degree angle
$175.00 -
Curve Surfboard Wall Rack Quad VERTICAL
4 Surfboard or 4 SUP Vertical Rack
Vertical Surfboard Wall Rack for 4x Surfboards or SUP boards. Precision engineered from a multi stage anti corrosion process, this Curve steel vertical surfboard rack is super durable and strong. Surrounded in EVA cushioning foam to provide soft & secure vertical storage for up to 4 surfboards, you know you are giving your quiver the best protection while also looking pretty damn fine! Ready to install right out of the box, with limited assembly required
Compatible with shortboards, longboards and SUPs
Features
- multi stage anti-corrosion process
- super strong & durable steel construction
- powder coated in black
- protective EVA foam padding and end caps for board protection
- easy installation with limited assembly required
- includes one rack plus installation screws
- stores 4 shortboards, longboards or SUPs (up to 6" thick)
- arm length 45cm [17.5"], base height 73cm [29"], space between arms 17cm [7"]
$90.00 -
Rhino Wall Hanger - Large
Keep your home and workspace clear of clutter with the Large Rhino-Rack Wall Hanger. The Wall Hanger allows you to mount and store your luggage box, tray, kayak or anything up to 80kg securely to the wall saving floor space. The Wall Hanger can be mounted to suit most wall types including brick, plasterboard and wood.
A tie down strap is also included to secure your load. The Wall Hanger features steel tubes that are electroplated and powder coated to resist corrosion when used outdoors.
- Incredible load rating of 80kg
- Electroplated and powdercoated steel tube frame for potential outdoor use
- The padded cover is UV stabilised, however, premature fading will occur outdoors compared to indoor use
- Included is a tie down strap to securely strap your gear in place
- Keeps your garage, outdoor area or work space clutter free
- Can mount Luggage Box, Pioneer Tray, Kayak, Canoe, SUP, Surfboard or almost anything you can imagine
- The Wall Hanger comes with all the necessary parts to assemble and mount
$184.00 - Incredible load rating of 80kg
