Deck Grip
Woweee do we have the tail pads for you. With one piece tail pads, two piece and three piece grips we are bound to have the right width for any size surfer. With differing arch styles we can accommodate for everyone including those with foot issues. We have almost every pattern under the sun and are happy to offer advice on styles and colour schemes. If wax isn’t your jam we have the necessary products to grip your whole board. With Brands of Sticky Johnson, Creatures, Ocean and Earth, Gorilla Grip, FCS and Dakine we will have a Deck Grip to suit you.
-
The Tail Block is perfect for surfers who don’t like traction pads but still want the security of a premium 28mm Ramp Kick. Also featuring, Diamond-Loc Traction pattern, 3M Adhesive backing and the exclusive lightweight premium EVA formula.
$49.00 -
-
Extra wide design suited to hybrid board models.
Pad Pieces: 2
Pad Grooves: DIAMOND
The high performing Aztec groove now features multiple layers to match the variety of pressures placed on the pad by the surfer.
Pad Arch: NONE
$60.00 -
Pad Pieces: 1
Pad Grooves: DIAMOND
The high performing Aztec groove now features multiple layers to match the variety of pressures placed on the pad by the surfer.
Pad Arch: COPPERHEAD
• 3D delta design with narrow ridge and high rear point
• Locks foot into rear of pad for aggressive turns$60.00 -
SPECS
Pad Pieces: 2
Pad Grooves: DIAMOND
The high performing Aztec groove now features multiple layers to match the variety of pressures placed on the pad by the surfer.
Pad Arch: NONE
$60.00 -
Pad Pieces: 3
Pad Grooves: DIAMOND
The high performing Aztec groove now features multiple layers to match the variety of pressures placed on the pad by the surfer.
Pad Arch: COPPERHEAD
• 3D delta design with narrow ridge and high rear point
• Locks foot into rear of pad for aggressive turns$60.00 -
-
-
-
-
-
Pad Pieces: 3
Pad Grooves: TRI-HEX
Get stuck with 3 way lock in pyramid scheme groove.
Pad Arch: COPPERHEAD
• 3D delta design with narrow ridge and high rear point
• Locks foot into rear of pad for aggressive turns$65.00 -
Dakine honors the loving memory of Andy Irons (1978-2010) with the Andy Irons Pro traction pad. The three-piece pad was designed with input from Irons and features a 5 mm center arch with 20 mm ramp tail kick. As part of Dakine's Andy Irons Signature Collection, proceeds from the sale of this pad benefit an annual fund in support of his son's trust. The pad features marine-grade 3M® adhesive.
Features.
2 Year Limited Warranty.
Positraction grid pattern.
Three piece pad.
5mm center arch.
20mm ramp tail kick.
3M® high grade adhesive.$69.00 -
Bruce Irons Pro Traction Pad features the custom arch and kick measurements used by Irons. This five-piece pad offers a 7 mm center arch and a vert wedge 25 mm tail kick with beveled edges. Will it make you surf like Irons? There's only one way to find out. It features marine-grade 3M® adhesive to keep it in place.
Features.
2 Year Limited Warranty.
Positraction grid pattern.
Five piece pad.
7mm center arch.
Vert wedge 25mm tail kick with beveled edges.
3M® high grade adhesive.Specs.
12" x 13.75" [ 30 x 35cm ].$69.00 -
-
-
SPECS
Pad Pieces: 3
Pad Grooves: DIAMOND
High profile, well-spaced diamond shaped groove allows your foot to fit into the voids locking it in place.
Pad Arch: COPPERHEAD
? 3D delta design with narrow ridge and high rear point
? Locks foot into rear of pad for aggressive turns$69.00 -
Signature 3 piece pad by Matt 'Wilko' Wilkinson.
Pad Pieces: 3
Pad Grooves: DIAMOND
High profile, well-spaced diamond shaped groove allows your foot to fit into the voids locking it in place.
Pad Arch: SABER
Larger, squarer shaped arch designed to firmly lock your foot between the arch and the kick.
$69.00 -
Dakine honors the loving memory of Andy Irons (1978-2010) with the Andy Irons Pro traction pad. The three-piece pad was designed with input from Irons and features a 5 mm center arch with 20 mm ramp tail kick. As part of Dakine's Andy Irons Signature Collection, proceeds from the sale of this pad benefit an annual fund in support of his son's trust. The pad features marine-grade 3M® adhesive.
Features.
2 Year Limited Warranty.
Positraction grid pattern.
Three piece pad.
5mm center arch.
20mm ramp tail kick.
3M® high grade adhesive.$69.00 -
Features:
- 3 Piece Tail Pads
- Aztec groove - Multi layered groove provides high resistance and maximum foot connection by adjusting to pressure applied by the surfer
- Three piece tail pad
- Sabre arch design - large, tapered square design for larger feet. Extends the arch further up the pad for maximum coverage
$69.00 -
Nick Rozsa's signature pad. Spring arch suits smaller feet.
Pad Pieces: 2
Pad Grooves: DIAMOND
High profile, well-spaced diamond shaped groove allows your foot to fit into the voids locking it in place.
Pad Arch: SPRING
• Slim, rounded teardrop design for smaller feet
• Rear pad locking with adjustable freedom$69.00 -
Kyuss King's signature pad. Locked in traction for aggressive turns.
Pad Pieces: 3
Pad Grooves: DIAMOND
High profile, well-spaced diamond shaped groove allows your foot to fit into the voids locking it in place.
Pad Arch: COPPERHEAD
• 3D delta design with narrow ridge and high rear point
• Locks foot into rear of pad for aggressive turns$69.00 -
High performance shortboard pad with side panel cut-outs.
Pad Pieces: 3
Pad Grooves: DIAMOND
The high performing Aztec groove now features multiple layers to match the variety of pressures placed on the pad by the surfer.
Pad Arch: COPPERHEAD
• 3D delta design with narrow ridge and high rear point
• Locks foot into rear of pad for aggressive turns$69.00 -
Pad Pieces: 2
Pad Grooves: DIAMOND
High profile, well-spaced diamond shaped groove allows your foot to fit into the voids locking it in place.
Pad Arch: SPRING
• Slim, rounded teardrop design for smaller feet
• Rear pad locking with adjustable freedom$69.00 -
Features:
- Style: 3 Piece Tail Pad
- Diamond groove allows your foot to fit into the voids locking it in shape
- Copperhead arch design - 3D delta design with narrow ridge and high rear point
- Locks foot into rear of pad for aggressive turns
$69.00
Clearance Products
-
The new Chute™ 1L water bottle is designed for hydration on demand, whether you’re in the backcountry or sitting at your desk. The ergonomic high-flow spout is angled and contoured for efficient, full-on hydration. The leak-proof, tethered cap twists off with just half a turn and conveniently snaps into the handle so it’s out of the way when you’re drinking. We even put the threads for the cap on the inside of the spout so you get a comfortable lip seal. And the one-piece tether is twice as clever as any you’ll see on the market. It keeps the top locked out of your way for one-handed refills on the go.
Angled spout provides an ergonomic drink interface that delivers a high flow of water without sloshing or spilling
Spout cap snaps into handle to prevent it from getting in the way when drinking
Comfortable to Carry: Handle designed to comfortable carry a full liter of water
Tether securely attaches the cap to the bottle for easy filling and refilling
Half Turn Cap gives you easy access to your water
The spout cap threads internally so there is no more drinking off those uncomfortable bottle threads
Dishwasher Safe: All parts are top-rack dishwasher safe
Durable and leak-proof
100% Free of BPA and BPS
Wide-mouth opening is easy to fill with ice and water and a breeze to clean
CamelBak® Got Your Bak™ Guarantee: If we build it, we'll Bak it™ with our lifetime guarantee.
Specs:
- Hydration Capacity: 32 oz / 1 L
- Total Weight: 6.08 oz
- Dimensions: 10 X 3.5 in / 25.4 X 8.89 cm
- Always: Always: 100% BPA-Free
- Warranty: Got Your Bak™ Lifetime Guarantee
- Bottle Material: BPA-free Eastman Tritan™ Copolyster
- Cap Material: BPA-Free Polypropylene
- Bite Valve Material: N/A
$40.00 -
Durable and leakproof, the 0.75-liter Chute Water Bottle provides a high flow of water without sloshing or spilling.
Angled spout provides an ergonomic drink interface that delivers a high flow of water without sloshing or spilling
Spout cap snaps into handle to prevent it from getting in the way when drinking
Comfortable to Carry: Handle designed to comfortable carry a full liter of water
Tether securely attaches the cap to the bottle for easy filling and refilling
Half Turn Cap gives you easy access to your water
The spout cap threads internally so there is no more drinking off those uncomfortable bottle threads
Dishwasher Safe: All parts are top-rack dishwasher safe
Durable and leak-proof
100% Free of BPA and BPS
Wide-mouth opening is easy to fill with ice and water and a breeze to clean
Was:$29.00Now:$17.00Price:$17.00
