Torq Tec M2 - 7'
The M2 has all the elements of a performance longboard in a much more compact package.
The center of the board is fairly straight and flat – this is the paddle and trim area, the functional section. At the front there’s a wide longboard nose with a single concave underneath – perfect for nose rides. From the mid-point back the template narrows into a round tail with a double concave vee underneath making this mini malibu super maneuverable off the tail.
A true Mini Malibu for all surfers in waves of 1ft to double overhead. The 4/3 set-up allows ultimate fin versatility.
Dimensions:
| DIMENSIONS | VOLUME |
| 7’0 x 20 3/4” x 2 5/8” | 43.3 ltr |
| 7’6 x 21 1/4” x 2 3/4” | 49.3 ltr |
| 8’0 x 21 3/4” x 2 3/4” | 54.7 ltr |
Technology:
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
The Mini Magic Dual-Core is a scaled down version of Walden's famous Magic Model. This is a good choice for a smaller surfer, people who are transitioning from a shortboard to a longboard or vice versa - longboarders wanting to go shorter while still maintaining some volume and float. The Dual-Core gives the Mini Magic the best of both style of constructions with PolyUrethane on the rails and EPS in the Center. The PU foam is laminated to the EPS with a TPU material which provides more pop and response.
Like the bigger Magic Model the hull has a unique design, the front 1/2 of the hull is concave, this single concave transitions into a double concave in the rear 1/3 and ends towards the tail that has a moderate “V”. The rails are hard. The concave nose adds lift and stability, perfect for nose riding. The double concaved hull and hard rails make the board fast, stabile, responsive and maneuverable in all conditions. This board performs as well as slow surf as it does on speedy beach breaks. The Mini Magic maneuvers well out of turns while maintaining a forgiving nature, and is an excellent nose rider too.***Fins Not Included
$1,599.00 -
ELEMNT Double Yolk - Smoke Green
The Elemnt Double yolk, is a mid length egg twin fin model that can paddle and cruise like a midlength, but with more hold, drive and manoeuvrability. Its design has a medium/low rocker curve, and a combination of pronounced vee and deep double concave bottom contours with low rails. Can be ridden in small slow mushy conditions, yet still perform when its overhead and hollow.
Construction:
EPS/epoxy Fin System: FCSII, Futures -
Twin Rocker: medium nose entry, low off the tail
Bottom Contours: Vee to subtle single and deep double concave
Tail Shape: Pulled in round tail
Does not come with fins.
Dimensions:
- 6’4" 21 1/2" 2 5/8" 36.85
- 6’8" 21 3/4" 2 5/8" 39.45L
- 7’0" 22" 2 3/4" 44L
- 7’2" 22 1/4" 2 13/16" 46.75
- 7’6" 22 5/8" 2 7/8" 50.80L
Was:$1,025.00Now:$699.00Price:$699.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.” Geoff McCoy
Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,145.00 -
TORQ Act Chopper - Black Rails /Brushed Gray
The Chopper is a versatile shape – it’s a cruisey ride when the conditions suit, but give it a big open face and it’ll fire on all cylinders.
We’ve updated the shape with more forward volume for a more flowy, forward trim style of surfing from the front half of the board but with slightly more flip in the tail rocker for tighter turns and aggressive surfing. This is a very user friendly board that suits small wave days and pumping days as well.
With a 2+1 fin set-up it can be ridden as anything from glidey single fin, 2+1 or thruster.
DIMENSIONS 6’10 x 20 3/4” x 2 5/8” - 42.6ltr 7’2 x 21 1/4” x 2 3/4” - 47.5ltr 7’6 x 21 3/4” x 2 7/8” - 52.5ltr ACT Tech:
THE SCIENCE
Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.
On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.
With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.
$1,199.00 -
Torq Mod Fun - 7'6"
“...ALL LEVELS OF SURFERS IN VIRTUALLY EVERY CONDITION”
This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.
Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft Dimensions - 7’6” x 21 1/2” x 2 7/8” Recommended Rider Weight - 50-100 kg / 110-220 lbs Volume - 52.4 ltr Our fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing.
$839.00 -
The Volume Plus takes the trend for high volume wide boards into the midlength model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
Dimensions Volume 8’2 x 22 7/8” x 3 1/4” 70.5 ltr $899.00 -
This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.
Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft+ Dimensions - 6’8” x 21” x 2 3/4” Recommended Rider Weight - 40-80kg / 90-175lbs Volume - 41.8 l FINS: 3 Fins supplied – Futures template F6
CONSTRUCTION
$719.00 -
Torq Tec Rusty Egg Not - White
Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.
’10 x 20.75” x 2.74” - 43.8 ltr 7’0 x 21” x 2.8” - 46.5 ltr 7’2 x 21.25” x 2.88” - 49.6 ltr 7’4 x 21.5” x 2.96” - 53.1 ltr 7’6 x 21.75” x 3.05” - 57 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.
The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,199.00 -
Torq Channel Islands M23 7'0"
The M23 comes from the storied M13 bloodlines, a favorite hybrid board Al Merrick made for himself and rode variants of for decades from fun Rincon to maxing Sunset. A true high performance hybrid that caters to the widest possible type and size of surfer - and for the widest range of wave conditions. Not to be confused with the CI Mid, the M23 carries more foam, boasting a fuller rail and sleeker nose outline. It paddles like a champ while still riding more like a shortboard.
7'0 x 21 1/4 x 2 7/8 (47.6L)
$1,029.00
