FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
You may also like ...
-
Two Quad Rear fins.
Elongated fin for performing long arc turns.High degree of sweep angle provides exceptional control off the bottom and when carving on the open face. Designed for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions.
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
*Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Specs.
Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"2 / 7140mm2
Sweep: 33.2o
Foil: 50/50$89.00 -
Mick Fanning's signature FCS II MF fin in Neo Carbon material for fast power surfing.
Overview
- Mick's fin in Neo Carbon material delivers an injection of power and speed through turns due to the ‘whipping effect’ through the tip of the fin.
- Ideal for fast, energetic surfing in softer conditions.
- This fin provides maximum drive.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
LRG 4.49 114 4.67 119 15.70 10131 36.0° Flat/Bev $139.95 -
Speed & tight turns. Ideal for beach breaks.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Fcs2 RM Camo Quad
Overview
- The Seaside Quad is Rob Machado’s first signature FCS II fin template.
- Designed specifically for his Firewire Seaside model.
- This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.
- Quad set containing 4 fins.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.
Board Types
- Designed to fit the FCS II Fin System.
- Excels in higher volume hybrid surfboard models.
$259.00 -
FCS2 Sharp Eye Matt Biolos PC Tri Fins
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
FCS II Performer Quad Rear Fin Set Glass Flex - Black
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Two Quad Rear fins.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$74.95 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Reactor PC Tri Fin Set - Charcoal/Black
Speed â& tight turns. Ideal for hollow waves and beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.22 107 4.41 112.0 14.45 9324 32.0° Flat SML Ctr 4.17 105.8 4.3 109.1 13.44 8672 31.0° 50/50 MED Side 4.33 110 4.53 115.0 15.23 9824 32.0 Flat MED Ctr 4.28 108.7 4.41 112.0 14.22 9172 31.0° 50/50 LRG Side 4.44 112.8 4.65 117.9 16.00 10324 32.0° Flat LRG Ctr 4.39 111.4 4.52 114.8 14.99 9672 31.0 50/50 .
$179.95 -
FCS II Gerry Lopez Tri-Quad Fin Set
Through his numerous experiences surfing heavy waves on the North Shore, Gerry Lopez's new upright template provides speed and control through hollow powerful waves.
Gerry Lopez, AKA Mr. Pipeline, showed what was possible on the infamous North Shore wave, adopting a relaxed stance while disappearing inside the hollow wave. His new fin template feels stable yet loose enough to turn smooth and easy. Ideal for bigger hybrid models these are the perfect fins for hollow powerful waves.
- Available in Medium Tri and Tri-Quad Sets.
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance hybrid models with deep concaves and moderate-to-extreme rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.21 107.0 4.21 119.7 14.84 9572 31.1° Flat Q-Rear 3.77 95.8 3.74 95.2 9.38 6054 31.4° Flat $309.00 -
FCS II Mick Fanning PC Medium Tri Fin - Blue/Black
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$199.00 -
FCS II Mark Richards Twin + Stabiliser Fins - Black
Overview
Mark Richard's famous twin template produces exceptional drive and speed.
The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types including fish, funboard and twin fin boards.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Sizing:Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
Side 5.06 128.4 5.56 141.1 21.06 13590 32.1° Flat Centre 3.31 84.0 3.34 84.8 8.23 5307 29.1° 50/50 $224.00 -
FCS II Power Twin + 1 Fin Set - Black
Overview:
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
- Twin fin + stabiliser
- Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Board Types:
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
Side 5.26 133.6 5.35 135.8 21.44 13835 32.7° Flat +1 3.30 83.7 3.45 87.6 8.71 5620 33.6 50/50 $239.00
