Fcs2 Mid Side Byte Pg3.6 Clear Retail Fn
Description
FCS II Mid Side Byte Fin Set - Clear
You committed to riding a midlength, so it makes sense to maximise the performance of the board by using a set of fins that allows you to perform to your full potential.
Overview
The 3.6" side bytes are derived from the historic GL template from the late '90s. This template has withstood the test of time and compliments the single by adding response and control when turning.
Surfers wanting a versatile and stable 2 + Box set for their midlength that will encourage smooth flow without restricting manoeuvrability and tighter turns performed higher on the wave.
- Side byte template for Midlengths
- PG Material
Neo Glass
Neo Glass fins are precision moulded using long-strand fibreglass and a marine-grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| 3.6" | 3.4 | 87.1 | 3.6 | 92 | 9.3 | 5990 | 28.6° | Flat |
View the FCS Fin Data page for Base/Depth/Area/Foil information.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP or as shortboard quad rears.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
You may also like ...
-
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00 -
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fin) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$119.00 -
Speed & tight turns. Ideal for beach breaks.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Almost intuitive in the way the H4 performs, when you initiate a turn, the fins will work for you by sullying speed when you need it, and then releasing at the ideal transition point.
While the science behind the template, the materials and the foils are highly complex, every component of this fin has been engineered to create a simple synergy between the fin and the surfboard, the rider and the wave.
UNIQUE TEMPLATE
Radically different side & centre fin templates create a powerful fin set with ultimate speed & drive.
SIDE FIN PROFILE: Lower section produces maximum acceleration, while hatchet like tip creates stability & control.
CENTRE FIN PROFILE: Highly raked elliptical outline reduces drag, and offers feeling of predictability when releasing through turns.
FIN FOILS TEMPLATE: Thicker base with tapered tip optimises flex & regulates the release of energy during rail to rial transitions.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
SIZES
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
$269.00 -
Fcs2 Performer Neo Glass Eco Tri Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Size
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgNeo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm
$134.95 -
-
Fcs2 Retro Keel Twin Fins - Black
Low aspect keel twin designed for fish shapes. Fast and loose with minimal drag.
Overview
- Low aspect keel template designed for fish shapes with contemporary outlines and concaves.
- Lowest area keel in the FCS range.
- Feels fast and loose with minimal drag, and encourages a more progressive and radical approach to riding a fish.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
- Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
Fcs2 Julian Wilson Tri Fins
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.
"My fins feels sturdy, fast and predictable with great projection out of the lip, and plenty of control when pushing your board hard through a turn” – Julian WilsonOverview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$229.00 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Mason Ho Signature Fin
Mason Ho's Signature fin. Welcome to Mason's world, and welcome to Mason's new fin.
Overview
Mase is calling this his new magic fin!
The new Mason Ho signature fin is a mashup of different templates. We took influences from Kelly Slater's original K-3 and Mick Fanning's signature templates, then reworked the flex, foil and tip profile based on extensive testing and feedback from Mason himself.
This might just be the fin to rule them all...Sitting in the Accelerator Family, this all-purpose, all-conditions fin will feel steady when driving into a turn, and fast and loose off the top. Explosive is another word to describe how this fin responds, and in this case, the personality of the M.Ho fin totally matches the creator and rider. Fast, Loose & Fun!
Mason's fin features a bevelled leading edge which allows for silky smooth transitions between turns. Performance Core + AirCore construction makes the fin a touch lighter, the flex a little stiffer and overall more reactive compared to standard PC construction, which is again suited to Mason's punk style of surfing.
This fin had a long development runway. Mason was after one fin he could use in his small wave rock-hopping fun boards right through to his big wave pipe guns, and it wasn't until he was totally satisfied that we pulled the trigger.
Welcome to Mason's world, welcome to Mason's new fin.
"The fins have been all time!!! Got some crazy waves at Ala Moana and got to push them hard as I could in the big bowl on some turns; full control off the bottom and nice and loose off the top. They went totally crazy in the pool as well, great projection on the air sections". Mason HoFeatures & Benefits
- Broad Spectrum Performance Fin
- 2-20 feet. Shortboards, step-ups, and guns
- Fast, loose, and steady
Ideal Conditions
Steady off the bottom, fast and loose off the top. Suited to a wide range of conditions, from small beachies to big bowling reef breaks. Ideal for surfers looking for a dependable, one-quiver fin.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.25 107.9 4.40 111.8 14.06 9074 34.9° Flat/Bev SML Ctr 4.25 107.9 4.40 111.8 14.06 9074 34.9° 50/50 MED Side 4.37 111 4.53 115 14.88 9602 34.9° Flat/Bev MED Ctr 4.37 111 4.53 115 14.88 9602 34.9° 50/50 LRG Side 4.49 114 4.65 118.1 15.70 10130 34.9° Flat/Bev LRG Ctr 4.49 114 4.65 118.1 15.70 10130 34.9° 50/50 $209.95 -
FCS II Performer Tri Fins - Black
Overview:
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.Ideal Conditions:
A wide range of conditions from beach breaks to point breaks.
Board Types:
Designed to fit the FCS II Fin System.
Recommended for all board types.Fin Family:
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex:
Glass Flex (GF) fins are moulded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
Sizing:
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$99.00
