Fcs2 Reactor Pc Quad Rear - Medium
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
- Quad Rear (2 fin) set.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg
You may also like ...
-
Fcs2 Al MerricK Performance Core Tri
Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Updated PC construction featuring our ultralight AirCore.
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
Mick Fanning's signature FCS II MF fin in Neo Carbon material for fast power surfing.
Overview
- Mick's fin in Neo Carbon material delivers an injection of power and speed through turns due to the ‘whipping effect’ through the tip of the fin.
- Ideal for fast, energetic surfing in softer conditions.
- This fin provides maximum drive.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
LRG 4.49 114 4.67 119 15.70 10131 36.0° Flat/Bev $139.95 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
Fcs2 Performer Neo Glass Eco Tri Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Size
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgNeo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm
$134.95 -
-
FCS II Al Merrick PC Tri Fin Set - Yellow
Al Merrick's 'AM' Performance Core shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.26 108.1 4.26 108.0 13.02 8400 35.5° Flat SML 4.37 111.0 4.37 111.0 13.71 8846 35.5° Flat MED (Side) 4.57 116.0 4.53 115.0 14.89 9608 36.6° Flat MED (Ctr) 4.33 110.0 4.41 112.0 13.72 8852 35.0° Flat LRG (side) 4.61 117.1 4.69 119.0 15.63 10083 36.3° Flat LRG (Ctr) 4.47 113.5 4.45 113.0 14.68 9469 38.6° 50/50 $209.00 -
FCS II Mick Fanning PC Medium Tri Fin - Blue/Black
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$199.00 -
FCS II Sharpeye PC Medium Tri Fins
Marcio Zouvi's 'Sharp Eye' shaper fin.
Overview
Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.
- Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
- High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
- Controlled high-speed turns in punchy conditions.
- Suited to performance and hybrid shortboards.
Sharpeye
Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
- Performs well in punchy conditions.
Board Types
- Designed to fit the FCS II Fin System.
- For all board types. Best suited to performance and hybrid shortboards.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)$199.00 -
-
FCS II Mason Ho Signature Fin
Mason Ho's Signature fin. Welcome to Mason's world, and welcome to Mason's new fin.
Overview
Mase is calling this his new magic fin!
The new Mason Ho signature fin is a mashup of different templates. We took influences from Kelly Slater's original K-3 and Mick Fanning's signature templates, then reworked the flex, foil and tip profile based on extensive testing and feedback from Mason himself.
This might just be the fin to rule them all...Sitting in the Accelerator Family, this all-purpose, all-conditions fin will feel steady when driving into a turn, and fast and loose off the top. Explosive is another word to describe how this fin responds, and in this case, the personality of the M.Ho fin totally matches the creator and rider. Fast, Loose & Fun!
Mason's fin features a bevelled leading edge which allows for silky smooth transitions between turns. Performance Core + AirCore construction makes the fin a touch lighter, the flex a little stiffer and overall more reactive compared to standard PC construction, which is again suited to Mason's punk style of surfing.
This fin had a long development runway. Mason was after one fin he could use in his small wave rock-hopping fun boards right through to his big wave pipe guns, and it wasn't until he was totally satisfied that we pulled the trigger.
Welcome to Mason's world, welcome to Mason's new fin.
"The fins have been all time!!! Got some crazy waves at Ala Moana and got to push them hard as I could in the big bowl on some turns; full control off the bottom and nice and loose off the top. They went totally crazy in the pool as well, great projection on the air sections". Mason HoFeatures & Benefits
- Broad Spectrum Performance Fin
- 2-20 feet. Shortboards, step-ups, and guns
- Fast, loose, and steady
Ideal Conditions
Steady off the bottom, fast and loose off the top. Suited to a wide range of conditions, from small beachies to big bowling reef breaks. Ideal for surfers looking for a dependable, one-quiver fin.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.25 107.9 4.40 111.8 14.06 9074 34.9° Flat/Bev SML Ctr 4.25 107.9 4.40 111.8 14.06 9074 34.9° 50/50 MED Side 4.37 111 4.53 115 14.88 9602 34.9° Flat/Bev MED Ctr 4.37 111 4.53 115 14.88 9602 34.9° 50/50 LRG Side 4.49 114 4.65 118.1 15.70 10130 34.9° Flat/Bev LRG Ctr 4.49 114 4.65 118.1 15.70 10130 34.9° 50/50 $209.95
