FCS II Al Merrick PC Tri Fin Set - Yellow
FCS II Al Merrick PC Tri Fin Set - Yellow
Al Merrick's 'AM' Performance Core shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| XS | 4.26 | 108.1 | 4.26 | 108.0 | 13.02 | 8400 | 35.5° | Flat |
| SML | 4.37 | 111.0 | 4.37 | 111.0 | 13.71 | 8846 | 35.5° | Flat |
| MED (Side) | 4.57 | 116.0 | 4.53 | 115.0 | 14.89 | 9608 | 36.6° | Flat |
| MED (Ctr) | 4.33 | 110.0 | 4.41 | 112.0 | 13.72 | 8852 | 35.0° | Flat |
| LRG (side) | 4.61 | 117.1 | 4.69 | 119.0 | 15.63 | 10083 | 36.3° | Flat |
| LRG (Ctr) | 4.47 | 113.5 | 4.45 | 113.0 | 14.68 | 9469 | 38.6° | 50/50 |
You may also like ...
-
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat$159.00 -
Speed ​& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Speed & tight turns. Ideal for beach breaks.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Almost intuitive in the way the H4 performs, when you initiate a turn, the fins will work for you by sullying speed when you need it, and then releasing at the ideal transition point.
While the science behind the template, the materials and the foils are highly complex, every component of this fin has been engineered to create a simple synergy between the fin and the surfboard, the rider and the wave.
UNIQUE TEMPLATE
Radically different side & centre fin templates create a powerful fin set with ultimate speed & drive.
SIDE FIN PROFILE: Lower section produces maximum acceleration, while hatchet like tip creates stability & control.
CENTRE FIN PROFILE: Highly raked elliptical outline reduces drag, and offers feeling of predictability when releasing through turns.
FIN FOILS TEMPLATE: Thicker base with tapered tip optimises flex & regulates the release of energy during rail to rial transitions.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
SIZES
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
$269.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
Fcs2 JS Modern Keel
The flow of a traditional twin fish with the control of a performance quad.
The JS Modern Keel is an upright keel template designed for the JS Red Baron and other specialty fish shapes. Featuring a wide base and a relatively small sweep (rake), this high area keel provides control through the face and pivot in a tight radius.
Overview
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & White in Performance Glass
Board Types
- JS Red Baron - The Red Baron, part of the Baron family, has a shorter and wider template with plenty of volume in the tail. It's tail width allows for speed generation through flatter sections as well as a deep double concave, this board was made with the JS Modern Keel template in mind.
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$199.00 -
-
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$319.00 -
FCS II Matt Biolos Carbon Tri Fin Set- Medium
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high-performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favoured by power surfers who like to perform explosive turns on critical parts of the wave.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML 4.19 106.3 4.46 113.2 13.71 8847 32.0° Flat MED 4.30 109.2 4.59 116.4 14.49 9347 31.7° Flat LRG 4.41 111.9 4.74 120.3 15.26 9847 32.9° Flat $209.00 -
FCS2 Performer Quad Fins - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fins) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Tri 4.25 108 4.43 112 14.03 9054 33.7° IFT SML Q-Rear 3.83 97 3.99 101 11.08 7150 32.4° 80/20 MED Tri 4.37 111 4.55 115 14.81 9554 33.7° IFT MED Q-Rear 4.09 104 4.26 108 12.63 8150 32.4° 80/20 LRG Tri 4.48 113.7 4.67 118 15.58 10054 33.7° IFT LRG Q-Rear 4.33 110 4.51 115 14.18 9150 32.4° 80/20 $259.00 -
FCS II Mark Richards Twin + Stabiliser Fins - Black
Overview
Mark Richard's famous twin template produces exceptional drive and speed.
The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types including fish, funboard and twin fin boards.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Sizing:Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
Side 5.06 128.4 5.56 141.1 21.06 13590 32.1° Flat Centre 3.31 84.0 3.34 84.8 8.23 5307 29.1° 50/50 $224.00 -
FCS II Performer Tri Fins - Black
Overview:
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.Ideal Conditions:
A wide range of conditions from beach breaks to point breaks.
Board Types:
Designed to fit the FCS II Fin System.
Recommended for all board types.Fin Family:
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex:
Glass Flex (GF) fins are moulded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
Sizing:
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$99.00
