- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- Fcs2 Christenson Twin+1 M-l Blk
Fcs2 Christenson Twin+1 M-l Blk
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat$159.00 -
Speed ​& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
FCS2 Performer Performance Core Tri - Teal Black
Balance of speed, flow and response. Suitable for all conditions.Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$179.00 -
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Almost intuitive in the way the H4 performs, when you initiate a turn, the fins will work for you by sullying speed when you need it, and then releasing at the ideal transition point.
While the science behind the template, the materials and the foils are highly complex, every component of this fin has been engineered to create a simple synergy between the fin and the surfboard, the rider and the wave.
UNIQUE TEMPLATE
Radically different side & centre fin templates create a powerful fin set with ultimate speed & drive.
SIDE FIN PROFILE: Lower section produces maximum acceleration, while hatchet like tip creates stability & control.
CENTRE FIN PROFILE: Highly raked elliptical outline reduces drag, and offers feeling of predictability when releasing through turns.
FIN FOILS TEMPLATE: Thicker base with tapered tip optimises flex & regulates the release of energy during rail to rial transitions.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
SIZES
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
$269.00 -
FCS 2 Modern Keel Performance Glass
Upright keel template designed for traditional fish shapes.
Features
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$189.00 -
Fcs2 RM Camo Quad
Overview
- The Seaside Quad is Rob Machado’s first signature FCS II fin template.
- Designed specifically for his Firewire Seaside model.
- This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.
- Quad set containing 4 fins.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.
Board Types
- Designed to fit the FCS II Fin System.
- Excels in higher volume hybrid surfboard models.
$259.00 -
Fcs2 Mark Richards Tri Fins - Black White Swirl
NEW SEASON COLOURS
MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.
Overview
- Mark Richard's famous twin template produces exceptional drive and speed.
- The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
$209.00 -
FCS II MARK RICHARDS FREERIDE TWIN FINS
Mark Richard's popular 4 x World Title twin template. Highly upright twin, making for an ultra loose feel with fast release.
Overview
The MR Freeride Twin fin takes us back to a time when Mark was reshaping the way surfers approached the wave. Cut from an old fibreglass skateboard deck, the original freeride fins paired with MR's revolutionary surfboard design changed the direction of surfboard design forever.
The Freeride twin sits very upright, making it super loose and free, with plenty of fast release off the top. The tip is more refined compared to his signature twin + 1, increasing the ability to pivot and turn on a dime.
Board Types
- Designed to fit the FCS II Fin System.
- Perfect twin fin for any retro-style board.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins have a rigid, highly responsive flex pattern that’s generally isolated towards the tip of the fin. This construction is widely used by advanced and pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$219.95 -
Fcs2 Retro Keel Twin Fins - Black
Low aspect keel twin designed for fish shapes. Fast and loose with minimal drag.
Overview
- Low aspect keel template designed for fish shapes with contemporary outlines and concaves.
- Lowest area keel in the FCS range.
- Feels fast and loose with minimal drag, and encourages a more progressive and radical approach to riding a fish.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
- Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
FCS II Carver PC Tri Fin Set - Eucalyptus
Powerful, drawn-out turns. Excels on open-face waves.
Overview
Designed for powerful, drawn-out turns with added hold.
An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.47 113 4.54 115 14.96 9650 37 Flat LRG 4.58 116 4.66 118 15.73 10150 37 Flat XL 4.69 119 4.77 121 16.51 10650 37 Flat $179.00 -
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95