Fcs2 Carver Performance Core Medium Tri
Description
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat
You may also like ...
-
Fcs2 Al MerricK Performance Core Tri
Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Updated PC construction featuring our ultralight AirCore.
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00 -
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$89.00 -
-
-
Fcs2 Retro Keel Twin Fins - Black
Low aspect keel twin designed for fish shapes. Fast and loose with minimal drag.
Overview
- Low aspect keel template designed for fish shapes with contemporary outlines and concaves.
- Lowest area keel in the FCS range.
- Feels fast and loose with minimal drag, and encourages a more progressive and radical approach to riding a fish.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
- Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$189.00 -
Fcs2 Julian Wilson Tri Fins - Army Camo
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.Overview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Cobalt
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
Tri/Quad (5 fin) se
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
FCS II Modern Keel Twin Fin Set - Mango/ White
Upright keel template designed for traditional fish shapes.
Overview
Upright keel template designed for traditional fish shapes.Lower sweep (rake) than most conventional, wider-based keels which allows it to pivot in a tight radius.High area and depth not only deliver a feeling of control when pushed harder on the open face but help to maintain tremendous speed through roundhouse cutbacks.Black and clear in Performance Glass.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types including fish, funboard and twin fin boards.Performance Glass
Performance Glass (PG) fins are machine-cut from layers of solid fibreglass. These fins are stiff and are widely used by-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.Performance Glass
Performance Glass (PG) fins are machine-cut from layers of solid fibreglass. These fins are stiff and are widely used by-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Medium - LargeMedium - Large
New Sizing for Specialty Fins
You may notice new size ratings for our Specialty Fin Range. Previously, all Specialty Series fins were rated an XL. To better reflect fin sizing, there are now 3 new size categories: S-M, M-L, and L-XL.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
M/L 6.41 162.8 5.50 139.5 25.05 16160 32.8° Flat $199.95 -
FCS2 Performer Quad Fins Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fins) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Tri 4.25 108 4.43 112 14.03 9054 33.7° IFT SML Q-Rear 3.83 97 3.99 101 11.08 7150 32.4° 80/20 MED Tri 4.37 111 4.55 115 14.81 9554 33.7° IFT MED Q-Rear 4.09 104 4.26 108 12.63 8150 32.4° 80/20 LRG Tri 4.48 113.7 4.67 118 15.58 10054 33.7° IFT LRG Q-Rear 4.33 110 4.51 115 14.18 9150 32.4° 80/20 $259.00 -
FCS II H4 Quad Rear Fins
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Quad Rears designed to work with both medium & large H4 sets.
Overview
This set comes equipped with 2 x Quad Rear Fins, designed to work with both medium & large H4 sets.
UNIQUE TEMPLATE
While the science behind the template, materials & the foils are highly complex. Every component of this fin has been engineered to create a simple synergy between the fin & the surfboard, the rider & the wave.
- REAR FIN SYNERGY: The H4 quad combines the power + control of the H4 thruster, with the added speed & drive of a quad.
- QUAD REAR PROFILE: A similar hybrid outline on the front and rear fins helps minimise turbulence + provides a smooth and predictable feel.
- ENHANCED FOILS: Revolutionary new foil designed to grip longer through turns and promotes perfect rail to rail transitions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
NEW CONSTRUCTION
- PRECISION SWISS ENGINEERED: Creates perfect synergy between fin geometry & HI-FI materials, giving smooth & predictable feel.
- HIGH DENSITY UNI-DIRECTIONAL CARBON FIBRE: Light & super strong with custom orientation to transfer more of your energy into speed than any other fin.
- DYNAMIC TRAILING EDGE: Internal composite morphs under extreme load, enabling the fins to be pushed harder without sliding out.
- INNOVATIVE PRODUCTION: Highly specialised robotic automation combined with camera assisted quality control, ensures absolute accuracy.
$189.95 -
FCS II Performer Tri Fins - Black
Overview:
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.Ideal Conditions:
A wide range of conditions from beach breaks to point breaks.
Board Types:
Designed to fit the FCS II Fin System.
Recommended for all board types.Fin Family:
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex:
Glass Flex (GF) fins are moulded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
Sizing:
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$99.00
