FSC II Machado Single Performance Glass 7"
FSC II Machado Single Performance Glass 7"
Rob Machado's new 7" single fin provides speed through open sections and pivot in the pocket.
Designed specifically for the rounded template of the Firewire Sunday, this fin will provide speed through the flat and pivot where you need it.
Wide base that gives drive on open sections and a shorter height that makes it easy to maneuver.
Firewire Sunday - Surfed as both a short board or mid-length, Rob Machado template allows long drawn out turns
FCS II Rob Machado Sunday Single side bytes compatible
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
You may also like ...
-
Well suited to modern nose-riders and traditional longboards with soft rolled tail edges. Maximum surface area from base to tip, combined with straight leading and trailing edges promotes a longer turning arc and holds the tail in when nose riding.
$145.00 -
Versatile, high performance LB fin for all conditions. Seamlessly connect turns and move up and down the board.
Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
TURN & CONNECT (Seamlessly connect turns and move up and down the board).
2 + 1 Compatible.
Suits most LB’s with hard edges.
Designed to be used in existing FCS Longboard boxes. No new box required.Fin Material.
Performance glass.Specs.
CONNECT 6"
Base: 4.27" / 108mm
Depth: 6.00" / 152mm
Area: 17.65" / 11390mm²
Sweep: 33.7º
Foil: 50/50CONNECT 7"
Base: 4.99" / 126mm
Depth: 7.01" / 178mm
Area: 24.05" / 15518mm²
Sweep: 33.7º
Foil: 50/50CONNECT 8"
Base: 5.64" / 143mm
Depth: 7.96" / 202mm
Area: 30.71" / 19812mm²
Sweep: 33.7º
Foil: 50/50CONNECT 9"
Base: 6.43" / 163mm
Depth: 9.03" / 229mm
Area: 39.91" / 25748mm²
Sweep: 33.7º
Foil: 50/50CONNECT 10"
Base: 7.13" / 181mm
Depth: 10.01" / 254mm
Area: 49.06" / 31653mm²
Sweep: 33.7º
Foil: 50/50$179.00 -
FCS2 Clique PG Longboard Fin - 9"
Versatile, well balanced template. 2+1 setup compatible.
​Versatile, well balanced template.
​​Shorter base makes it highly manoeuvrable.
​​Slim tip provides a high level of forgiveness out of the turn.
​​Suited to traditional and performance longboards.
2 + 1 Compatible.
Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$164.00 -
FCS Clique PG Longboard Fin 8"
Versatile, well balanced template. 2+1 setup compatible.
Versatile, well balanced template.
Shorter base makes it highly manoeuvrable.
Slim tip provides a high level of forgiveness out of the turn.
Suited to traditional and performance longboards.
2 + 1 Compatible.
Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$154.00 -
Fcs2 Thomas Bexon Signature Fin - Volan
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
Fcs2 Thomas Bexon Signature Fin - Bloom
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box require
$189.00 -
FCS II CONNECT PERFORMANCE GLASS
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Versatile, high performance fin. Connect turns and move up and down the board.
Overview
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
2 + 1 Compatible.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$159.95 -
FCS II SINGLE FIN
Full-bodied template providing a stable and predictable feel.
Overview
Low sweep (rake) allows for tight controlled turns
Ideal for performance single fins and bonzer models.
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$159.00 -
FCS II Flow Performance Glass 8.5" Longboard Fin - Sand
Single fin designed for controlled flowing turns.
Overview
- Drive hard off the bottom and perform controlled flowing turns.
- Neutral fin with elongated base.
- Provides excess drive and hold for longer turns and trim stability.
- Suited to a more laid back style of longboarding.
- Designed to be used as a single fin.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$179.00 -
FCSII Pivot Performance Glass Fin - Charcoal Grey
Overview
- Pivot in the pocket, lock the rail on the wave face and run the nose.
- Upright fin with minimal sweep and base.
- Loose fin for performing tighter turns.
- Bigger sizes ideal for logs and nose riding (9" + 10").
- 2 + 1 Compatible.
- Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$199.00 -
FCS2 Single Fin- Paddle Pop
Full-bodied template constructed in Performance Glass, providing a stable and predictable feel.
Overview
Low sweep (rake) allows for tight controlled turns
Ideal for performance single fins and bonzer models.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$149.00 -
FCS II Thomas Longboard Fin - Flame
NEW SEASON COLOUR 23/24
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Overview
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that flexible fins can give at times." - Thomas Bexon.
Performance Glass
Performance Glass (PG) fins are machine-cut from layers of solid fiberglass. These fins are stiff and are widely used by pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid-surf.
- Easily insert or remove your fin in seconds. No fin key is required.
- Designed to be used in most existing Longboard boxes. No new box is required.
$189.95
