Mick Fanning Twin Town - Cedar
Mick Fanning Twin Town - Cedar
The Mick Fanning Twin Town is a mid length twin, built utilising traditional softboard techniques.
Twin Town is light weight, super durable, extremely flexible and perfect for every level of surfer in a diverse range of surf conditions!
This board generates speed with minimal effort, paddles like a dream, catches any wave you look sideways at and cruises down the line with effortless flow.
Switch the softflex keels out for a retro hard keel fin set and experience one of the fastest high lines around.
- 2 Multi Fin boxes
- DECK: PO Layer, XPE Layer and then IXPE Layer
- BOTTOM: PO layer, XPE Layer, HDPE Layer
- Dual Bamboo stringer
Twin Town is built for good times and nothing else!
SIZING:
6’6" x 22" x 2 3/4" 44L
7’0" x 22" x 2 3/4" 48L
7’6" x 22" 5/8 x 2 7/8" 55L
8’0" x 22" 5/8 x 2 7/8" 59L
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
O&E Ezi Rider Soft Board 7'
Summer fun for the whole family. The Ezi-Rider 7'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.
Features:
Length: 7'0
Width: 22 1/8"
Thickness: 3 1/4"
Volume: 60L
Fins: 3 x 4.5" Soft PU
Fin Box: Thruster - Interchangeable Dual Tab
Rider Weight: <95k.
Features:
IXL + WBS DECK SKIN Crosslinked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.
EPS CORE Highly waterproof and lightweight. 2x stringers increase board strength and maintain rocker.
HDPE BOTTOM PLATE 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick. Available in a range of colours.
STRINGERS Increase board strength. Stringers are moulded directly into the core to give superior strength and maintain rocker (nose & tail lift).
PROVEN TEMPLATE SHAPES Developed and refined over 20 years, Ezi Rider template shapes are tested and proven to be the best.
THERMAL REACTIVE SIMULATION To help protect against delamination, all O&E bodyboards are tested in a heat induced environment at 70Ì´°C for two hours.
SUBSTRATE Impact resistant PE foam substrate material between core and bottom slick for high strength lamination.$619.00 -
Gnaraloo Beach Cruiser - 7'6"
- Gnaraloo Beach Cruiser surfboards provide the ultimate in fun and safety for beginner surfers. Theses boards are incredibly buoyant, stable, and easy to ride..
- With an emphasis on safety and durability, the Beach Cruiser feature a thick Polyethylene deck and a soft slick skin on the bottom surface that’s tough enough to take a beating, yet is soft enough to keep beginners safe.
- The secret to the performance of these boards lies within the core. An embedded plywood stringer system maintains the integrity of the rocker while providing a stiff, stable platform. This lets you paddle onto waves with minimal effort and feel confident once you’re on your feet.
- These surfboards are designed to withstand the toughest of treatment, making them ideal for surf schools. The vacuum construction process eliminates hard or sharp surfaces, and prevents peeling or bubbling. A reinforced tail zone also provides added protection.
- Available in a variety of sizes from 9 foot right down to 6’0″. Each board comes fitted with a convenient carry handle and an easy-to-use fin system complete with flexible thruster fin set.
- Your initiation into the world of surfing starts with a Gnaraloo Beach Cruiser.
Construction: Soft Shell (Soft)
Boards with Soft Shell construction feature much more technology then the eye can see. They are a combination of materials designed to allow the board to perform to the highest levels given the constraints of the flexibility of the materials. All boards feature an integrated Fin System, 2 or 3 Wooden Stringers depending on the size of the board to ensure the board is stiff enough. A lightweight EPS core combined with a PE foam layer on the deck and a High-Density PE Slick that is mounted to a thin PE Foam layer on the bottom give the board an awesome feel in the water. Soft enough not to hurt should you fall on it but hard enough to handle the power of the waves.- Board Contours: Flat Bottom
- Rail: Full Rail
- Surfer Skill Level: Beginner
- Wave Height: 0-3ft
Length Width Thick Volume Fins (Supplied) Approx Weight Range 7'6'' 22'' 3 3/8'' 75.7 ltr Soft Post 80kg / 176lb $525.00 -
O&E Ezi Rider Soft Board 6'6"
Summer fun for the whole family. The Ezi-Rider 6'6 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.
Features:
Length: 6'6
Width: 21 1/4"
Thickness: 3"
Volume: 52L
Fins: 3 x 4.5" Soft PU
Fin Box: Thruster - Interchangeable Dual Tab
Rider Weight: <90k
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.MIDDLE - CORE/ STRINGERS
EPS (Extruded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.$579.00 -
O&E Happy Hour Epoxy/Soft Board
The Happy Hour is all about fun with an edge! Suprising all round performance with the stiffness of an epoxy board plus the benefits of a durable soft textured deck. Narrower pin tail for performance. Wider nose area for easy paddling. Minimal rocker for easy paddling to catching waves.
Soft Board Features:
- DECK: Textured EVA
- EPS CORE - Highly waterproof & lightweight. 2X stringers increase board strength and maintain rocker.
- HDPE BOTTOM PLATE - 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick.
- INTERCHANGEABLE FIN BOX - Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key.
- PU TEXTURED DECK SKIN - Grippy textured deck surface. Highly water resistant and extremely durable. Excellent grip and impact resistant.
- 5 FIN SET UP - Ride as thruster or quad set up with your favourite single tab fins. 2X Soft tip PU fins and fin key included.
- FINS (SUPPLIED) : 1x 8" Polycarbonate centre fin
2x 4" Polycarbonate side fins - FINS BOX: Centre = 10" Box
Side Fins = Single Tab X4 (Compatible with Future Fins)
DIMENSIONS:
- 6'0" X 21" X 2 3/4" (37.6L)
- 6'6" X 21 5/8" X 2 7/8" (43.4L)
- 7'0" x 22" x 3 1/8" (52.4L)
- 7'6" X 22 1/4" x 3 1/4" (59L)
- 8'0 x 22 1/2 x 3 1/8 (62L)
$707.00 -
O&E Creative Army -The General - Epoxy/Soft Board - Mint
It's the leader of the pack and one of the most versatile longboards in the Creative Army Range. Creative Army is the love child of former World Longboard Champ Josh Constable. In collaboration with Ocean and Earth, this soft board constructed in Epoxy has a modern rocker making for precise turns, fast trimming and awesome tip time. Even if you're a long time nose rider or just learning and wanting some fun, this is the longboard for you.
Features
- Length: 9'6
- Width: 23 3/4"
- Thickness: 3 1/8"
- Volume: 92L
- Board Weight: 8.4kg
- Fins: 1 x Single fin 9" PU
- Fin Box: 10" Centre Box
Creative Army Epoxy features
TOP - DECK- Grippy EVA textured deck surface / 1 X E-Glass 6oz / 0.5mm wood veneer / 1 X E-Glass 6oz. Highly water resistant and extremely durable. Excellent grip and impact resistant.
MIDDLE - CORE/ STRINGERS
- EPS (Expanded Polystyrene) highly waterproof & lightweight. 2 x stringers (8'0" - 9'6") 1 x stringers (7'0" - 7'6") increases board strength and maintain rocker.
BOTTOM - SLICK
- 1mm thick HDPE high density polyethylene plate / 2 X E-Glass 6oz. Durable, extra strength performance slick.
INTERCHANGEABLE FIN BOX
- Centre Fin - 10" fin box compatible with single fin screw and plate design.
- Side Fins - (sizes from 7'0"- 8'0") compatible with single tab / Future fins. Allows quick and easy fin changing.
- Secures with fin key (included).
Sizing
7'0 x 22 1/4 x 2 1/2 (45L) 2+1 Fin System
7'6 x 22 1/2 x 2 1/2 (52L) 2+1 Fin System
8'0 x 22 3/4 x 2 3/4 (61L) 2+1 Fin System
8'6 x 23 x 3 (79L) Single Fin
9'0 x 23 1/2 x 3 (87L) Single Fin
9'6 x 23 3/4 x 3 1/8 (92L) Single Fin$819.00 - Length: 9'6
-
Softech The Triplet 5'8"
- A combo of fresh and old school. The perfect board for fast and steezy surfing.
- A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.
- Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.
- Vacuum glassed with 6OZ. cloth
- High density PE foam deck
- Ultra-thin soft HDPE slick bottom
Features: - Size: 5'8" / 6'0" / 6'3"
- Dimensions: 5'8" x 20 1/2” x 2 7/16”, 6'0" x 21 1/8” x 2 3/8”, 6'3" x 21 1/4” x 2 3/4”
- Core: Epoxy Core
- Stringer: Single Stringer
- Fin Setup: Tri (x3 FCS II Fin Setup)
- Fin System: FCS II
- Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L
+ Leash Plug installed
+ FCS II Softflex Fins included
$659.00 - A combo of fresh and old school. The perfect board for fast and steezy surfing.
-
Mick Fanning Little Marley - White
Short, wide, fast and fun the Little Marley has a short rail line that fits perfectly into the smallest pocket. The small curvy outline helps in the weakest of beach breaks by decreasing drag and increasing speed which is the key to this little pocket rocket.
A single to double concave allowing full control at speed, the subtle diamond tail provides multiple pivot points for turning in the most critical sections of dumpy little shore breaks.This product comes with FCSII Performer Softflex Thruster Fins.
Sizing
Length 5’2 x 21 Width x 2 5/16 Thickness 29L VolumeLength 5’4 x 21 3/8 Width x 2 3/8 Thickness 32L VolumeLength 5’6 x 21 3/4 Width x 2 1/2 Thickness 35L VolumeLength 5’8 x 22 1/8 Width x 2 11/16 Thickness 39L VolumeLength 5’10 x 22 1/2 Width x 2 13/16 Thickness 43L Volume$779.00 -
Mick Fanning Beastie Epoxy-Lam - Sky
Beastie Epoxy Lam – The Ultimate Funboard for Progression & Versatility
The Beastie Epoxy Lam is engineered to be the next-level funboard, making every wave accessible and every ride smooth. Its clever volume distribution and generous outline create a super stable platform, perfect for building skills or as a playful longboard alternative.
Why Choose the Beastie Epoxy Lam?
- Ample, well-balanced volume for stability and effortless paddling, ensuring easy wave-catching and comfort in the lineup
- Wide outline provides a forgiving, confidence-boosting platform that’s great for progression or relaxed cruising
- Wide tail enhances lift and acceleration in weak waves, creating a substantial sweet spot for take-offs and stylish turns
- Durable Epoxy Lam construction delivers a lightweight, resilient board that performs session after session
- Adaptive FCSII/Futures fin system with thruster setup lets you fine-tune the ride for evolving styles and surf conditions
- Supplied with Thruster FCSII Softflex or Futures F8 Safety fins for versatile performance and safety
Sizing and Volumes
6’0” x 20” x 2 5/8” (37.01L)
6’6” x 22” x 2 3/4” (46.19L)
7’0” x 22” x 2 3/4” (50.05L)
7’6” x 22 5/8” x 2 7/8” (57.51L)
8’0” x 22 5/8” x 2 7/8” (61.52L)
8’6” x 24” x 3 1/2” (87.03L)
9’0” x 24” x 3 1/2” (91.92L)
Key Specs
- Construction: Epoxy Lam
- Rocker: Medium
- Bottom contours: Single to double
- Outline: Wide round tail
- Fin system: FCSII/Futures – Thruster
- Fins supplied: Thruster FCSII Softflex / Futures F8 Safety
Benefits
- Reliable platform for rapid progression and high wave count
- Wide tail adds lift and speed to weaker waves, keeping sessions fun even on smaller days
- Durable epoxy build handles the demands of regular surf and travel
- Adaptable for all levels—welcoming for learners, lively for advancing surfers
- Versatile sizing to suit groms, adults, and everyone in between
Who’s it For?
Surfers who want to progress quickly and catch more waves, without sacrificing stability or fun
Anyone looking for a funboard that doubles as a longboard alternative
Riders of all skill levels who value durability, comfort, and adaptability in their board
The Beastie Epoxy Lam is your everyday ticket to easier wave-catching, stable rides, and unstoppable surf enjoyment—no matter where your progression takes you.
$829.00 -
Critical Slide Fun Guy Epoxy Soft -Plein Air
The Epoxy Soft construction makes the Fun Guy a magical board to surf, offering a smooth ride for every skill level. This model is classified as a fun board which is fitting in the sense that it will paddle superior to others in the line up, feel comfortable under your feet & gather speed easily too, hence increasing the fun when taking the fun Guy for a paddle.
There is a performance element to this model to however, single/double concave for speed & moderate rockers through out to give you the option of turning in more critical parts of the wave. Don’t let the soft exterior fool you this board will take you where ever you want to go on a wave.
OUTLINE: Classified as a fun shape, the outline is full and generous from nose to tail providing maximum stability on small to medium size waves. The rounded nose keeps the area up front and allows the rider to comfortably shift their weight forward. The slight taper through the tail lets you maneuver the board with ease.
ROCKER: Low, relaxed rocker makes this board paddle onto waves really well, accelerate from the take off with minimal effort, and allow for flowing turns on the face of the wave.
CONTOURS: Vee-to-double concave bottom makes for easy rail-to-rail transitions and offers control when driving off the tail.
FOIL: Designed with plenty of volume in the nose and tail, and out towards the rails, which provides added stability and makes this board simple to ride for surfers transitioning from the wastewater to unbroken waves.
FINS: Fitted a two plus one set up. with FCS II side plugs makes installing and removing fins quick and convenient. that’s easy to ride and control.
The Epoxy Soft Construction is a real game changer in the soft surfboard market. When you break it down it's a multi layer construction that comprises of a PE deck skin that is supported by a thin wood veneer layer that is housing a epoxy resin and fibreglass wrapped machine shaped EPS core. The bottom layer is a High Density PE skin.
LENGTH WIDTH THICK VOLUME SUPPLIED FINS APPROX WEIGHT RANGE 7'0" 21 1/2" 2 3/4" 47litres 6" Centre/ FCSII quad rears 60kg+ 8'0" 22" 3" 61ltr (171 beers) 6" Center / FCSII quad rears 80kg $695.00 -
Ocean & Earth Ezi Rider Softboard 7'6"
Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.
Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistantMIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).
THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.Features:
Length: 7'6
Width: 22 1/8"
Thickness: 3 1/4"
Volume: 64L
Board Weight: 5.07kg
Fins: 3 x 4.5" Soft PU
Fin Box: Thruster - Interchangeable Dual Tab
Rider Weight: <100kg
$639.00 -
O&E Ezi Rider 6'0 Soft Board
Ocean & Earth Ezi-Rider softboards are safe and a whole lot of fun for the whole family. The beginner surfer can get the full taste of surfing as quickly as possible with the confidence and safetey they need arounf the water. The ideal surfboard for every family looking to get into surfing
Features:- Soft rails and deck, NO WAX NEEDED!
- Flexiable fins for added safety
- Super easy to paddle and very stable
- Thermal reactive simulation tests ensure the highest quality lamination of materials
- Double laminated stringers laminated within core
- DECK WBS (Water Barrier Skin) / IXL lightweight, crosslinked PE skin. Highly water resistant. Extremely durable. Excellent grip and impact resistant
- SUBSTRATE Impact resistant PE foam substrate material for high strength lamination.
- STRINGERS Increase board strength. Stringers are moulded directly into the core to give superior strength and maintain rocker (nose & tail lift).
- CORE Highly waterproof and lightweight.
- BOTTOM PLATE 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick
$549.00
