- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- FCS II Performer Quad Fin Set - Tranquil Blue
FCS II Performer Quad Fin Set - Tranquil Blue
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Carver Glass Flex Quad Rear
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL - Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
FIN SIZE
SMALL (55Kg - 70Kg)
MEDIUM (65Kg - 80Kg)FIN SPECS: SMALL
Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"² / 7140mm²
Sweep: 33.2º
Foil: 50/50FIN SPECS: MEDIUM
Base: 4.14" / 105mm
Depth: 4.21" / 107mm
Area: 12.63"² / 8150mm²
Sweep: 33.2º
Foil: 50/50$59.00 -
Fcs2 Carver Performance Glass Quad Size - Small
Powerful, drawn-out turns. Excels on open face waves.
OVERVIEW
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and and draw out their turns.
- Two Quad Rear fins.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
PERFORMANCE GLASS
Fin Specs
Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50$129.00 -
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Overview
Mick's fin in premium pc material delivers a dynamic, yet very controlled feel when performing powerful turns.
Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
This fin provides maximum drive and control.Ideal conditions
Open face, down-the-line waves, particularly good in point and reef breaks.Board types
Designed to fit the fcs ii fin system.
Recommended for performance shortboards with moderate-to-extreme rocker.Fin family
Carver: find power. Powerful, drawn-out turns with added hold.$139.95 -
Fcs2 Carver Neo Glass Tri Fin
The Carver template in Neo Glass Eco offers powerful, drawn-out turns and excels on open face waves. Constructed with 50% glass and bio-resin, the Neo Glass Eco Carver has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Size
- MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
Neo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.$119.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
Fcs2 Mick Fanning PG Twin+1
NEW RELEASE: Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.
Overview
- Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
- Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
- The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
- Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM molding process making it much lighter while allowing total manipulation of the flex.
X-LARGE (One size suits all)
$229.00 -
FCS II Mid Side Byte Fin Set - Clear
You committed to riding a midlength, so it makes sense to maximise the performance of the board by using a set of fins that allows you to perform to your full potential.
Overview
The 3.6" side bytes are derived from the historic GL template from the late '90s. This template has withstood the test of time and compliments the single by adding response and control when turning.
Surfers wanting a versatile and stable 2 + Box set for their midlength that will encourage smooth flow without restricting manoeuvrability and tighter turns performed higher on the wave.
- Side byte template for Midlengths
- PG Material
Neo Glass
Neo Glass fins are precision moulded using long-strand fibreglass and a marine-grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
3.6" 3.4 87.1 3.6 92 9.3 5990 28.6° Flat View the FCS Fin Data page for Base/Depth/Area/Foil information.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP or as shortboard quad rears.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$119.95 -
FCS II Performer PC Tri Fin Set - Mango
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Matt Biolos Tri-Quad Fin Set
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
- Tri/Quad (5 fin) set.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
$319.00 -
FCS II Matt Biolos Carbon Tri Fin Set- Medium
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high-performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favoured by power surfers who like to perform explosive turns on critical parts of the wave.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML 4.19 106.3 4.46 113.2 13.71 8847 32.0° Flat MED 4.30 109.2 4.59 116.4 14.49 9347 31.7° Flat LRG 4.41 111.9 4.74 120.3 15.26 9847 32.9° Flat $209.00