Billabong 2 mm Pro Reef Wetsuit Boots - Black
Product Details
A surf adventure essential, the Billabong 2mm Pro Reef Boot has you covered, literally, when you need it. Combining effortless design and comfort into one solid package, these men’s wetsuit boots are made from ventilated neoprene so your feet can breathe, and Superlight Foam, a partially recycled material that enhances stretch and heat-retention throughout. Featuring an arch strap, pull-on entry system for a snug fit and flatlock stitched seams for trusted durability. Featured here in the Black colourway.
Material & Care
Material:
Care Instructions:
Our most popular and most premium surf boot, featuring revolutionary TDC Thermo Dry Celliant, our warmest inner lining ever. TDC features mineral-enhanced smart fibers that recycle body heat into infrared energy for greater warmth, increased endurance, faster recovery, and enhanced overall performance.
The Drylock is loaded with more exclusive features including ergonomically angled Velcro straps and seamless Drylock ankle seals for an ultra-premium, comfortable fit. The thin yet durable sole design allows for a better, true-to-the-board feel, and the sole is solid underneath the split toe to prevent annoying leash hangups.
The Drylock boot also features 100% UltraStretch neoprene and a glued and blindstitched seam construction sealed with inner Thermo Dry Seam tape and outer Taitex to keep warmth in. Even the back ankle pull loop is Pressure Bonded to the outer boot, which keeps even more water out since no stitching ever penetrates through the boot neoprene.
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:
3D Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
3-Point Strap with Floating D-Ring
Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption.
Thermal Rebound Lining
The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.
Tatex Flex-Spine
The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Sustainable style meets performance-enhancing innovation in the Billabong 3mm Furnace Wetsuit Boots. Featuring premium, lightweight neoprene designed to keep you warm and boost mobility, these men’s wetsuit boots are made with recycled Airlite stretch and our exclusive Furnace Graphene for a stretchy, comfortable feel throughout. Designed with a hidden split toe for a barefoot fit.
Men’s Wetsuit Boots
When you need the best performance boot possilbe. The Hyperfreak dipped boots are the favourites of the O'Neill staff and team. The dipped technology form fits to your feet to reduce the amount of water in your boot while surfing. Designed with a stretch entry to help you get them on and off.
O&E Neoprene Summer Sox
Protect your feet from your flippers rubbing with our Neoprene Summer Sox. Made from high-quality 1mm stretch neoprene, these surf boots allow for maximum ankle movement. Featuring a non-slip tread that protects the neoprene and provides grip in and out of the water.
Billabong 3mm Furnace HS Boot - Black
Features
Fabric Content
