Rip Curl Pocket Reef Boot
This 1mm split toe bootie folds away into your pocket to get you in and out across the reef! So you can surf in bare feet. For sizing we have found it is best to go up 2 sizes.
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
The Xcel Reef Bootie is a 1mm lightweight flexible split toe boot made with a superlight neoprene engineered to fit your feet. Walk on rocks or reef without hurting your feet!
Was:$79.00Now:$39.00Price:$39.00 -
Solite flagship wetsuit boot for warm water conditions (>60F), the 2MM Custom Reef provides heavy-duty protection against sharp sea-floor in an ultra-light, barely there package. Surf, SUP, Kite, Windsurf, Kayak: the Custom Reef lets you focus on performance with no worry of shredding your feet. Our obsession with booties means the lightest, best-performing reef boot on the market has stepped up several notches for 2019, featuring improved board feel, grip, flexibility, comfort, puncture resistance and durability. How'd we make the world's best reef boot even better?
1. Natural rubber sole pods are made with a softer, tackier, more flexible compound for improved traction both on a board and on slippery rocks.
2. Heat-moldable Thermo Foam has also been updated with a softer, more comfortable formula which stays soft in colder temps.
3. Completely redesigned our velcro ankle strap, co-molding the textile strap to the rubber sole and introducing a flexible, durable Tatex-coated hook strap for a stronger hold.
4. All rubber sole-pods on the Custom Reef are co-molded with a puncture-resistant laminate which wards off urchin spines and other sharp objects while still maintaining barefoot-like board feel.
Recommended Water Temps: 15 Celsius and above . 60+F.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7.
Key Features:
- Heat-moldable with boiling water for the perfect custom fit.
- NEW softer-compound thermo-foam sole for next-level comfort, warmth, dexterity, and durability.
- Internal split-toe locks your foot inside the boot for precise response.
- NEW super-tacky and flexible 1mm vulcanized rubber sole pods for barefoot board feel, grip, and abrasion resistance.
- 2mm perforated Airprene upper with comfy flat-stitch seams allows free-flow of water to keep feet cool and comfortable.
- Abrasion-resistant Supratex II outer lining keeps sand/sediment out of the boots and deflects rock/reef scratches.
- NEW full-wrap ankle strap co-molded into the sole improves durability.
- NEW Tatex-coated hook strap improves durability and holding power.
- Elastic cord-lock cuff secured to outside of cuff for easy-reach, one-hand tightening.
$119.00 -
The Flashbomb 3mm Hidden Split Toe Booties are the best bet for icy conditions. Designed with a slim sole with textured grip, these booties allow for optimum board feel and control. They're also made with quick drying Flash lining topped with a deodorising treatment meaning your booties stay dry and fresh after every surf.
$119.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:
3D Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
3-Point Strap with Floating D-Ring
Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption.
Thermal Rebound Lining
The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.
Tatex Flex-Spine
The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:
- Enhances durability with an abrasion resistant rubbery surface.
- Reduces stretch to act like a shoe-horn, making it easier to slide your heel into the boot.
- Provides a sticky external surface to grab your wetsuit leg and prevent flushing.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$159.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:
3D-Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior
Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$129.00 -
Rip Curl Flashbomb Hiddden Split Toe 5mm Booties
The Rip Curl Flashbomb 5mm Hidden Split Toe Booties are lifesavers when winter and cold water hits. Featuring a 0.6mm sole with textured grip, ultra flexible soft soles, you'll feel more dialled in than ever.
Designed with sealed seams to keep water out, detailed with Flash Lining interior that dries rapidly. These boots are made for surfing, no matter how harsh the conditions.
Features:
- Flash Lining
- 0.6mm thin rubber sole
- Ankle and foot strap
- Slide on easy S.O.S system
- Textured grip print
- Anti-stink treated
- Seam sealed
$139.00 - Flash Lining
-
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.$89.00 -
Billabong Furnace Hidden Split Toes Boots 3mm
Sustainable style meets performance-enhancing innovation in the Billabong 3mm Furnace Wetsuit Boots. Featuring premium, lightweight neoprene designed to keep you warm and boost mobility, these men’s wetsuit boots are made with recycled Airlite stretch and our exclusive Furnace Graphene for a stretchy, comfortable feel throughout. Designed with a hidden split toe for a barefoot fit.
Features:
Men’s Wetsuit Boots
- Thickness - 3mm
- Smart Foam, partially recycled and premium lightweight.
- Exterior fabric - Airlite Recycler stretch now made from 100% recycled fibres
- Interior Fabric Type - Graphene Recycler Plus
- Hidden split toe neoprene boot
$149.00 -
O'Neill Defender Split Toe 3mm Wetsuit Boot - Black
The O'Neill Defender 3mm boot is the remedy for Keeping the Cold Out. Ultraflex DS neoprene, Anti-Flush Shin Strap and PolarFlex liner all rolled into a durable and reliable winter asset.- UltraFlex DS Neoprene
- Glued Blind Stitched + Taped Seams
- Durable Outsole
- Anti-Flush Shin Strap
- 3mm
- PolarFlex Liner
- Sizes 5-14
$99.00 - UltraFlex DS Neoprene
-
When you need the best performance boot possilbe. The Hyperfreak dipped boots are the favourites of the O'Neill staff and team. The dipped technology form fits to your feet to reduce the amount of water in your boot while surfing. Designed with a stretch entry to help you get them on and off.
- Dipped Envy Foam
- Liquid Dipped Sealed Seams
- Ultra comfortable
- 3mm
$139.00