Fcs2 Mb Pc Carbon Medium Tri Quad Blue
Description
FCS II Matt Biolos Tri-Quad Fin Set
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
- Tri/Quad (5 fin) set.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
You may also like ...
-
Fcs2 Carver Performance Core Tri Fins - Acid Black
Powerful, drawn-out turns. Excels on open face waves.
Overview
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
FCS II AM Keel Performance Glass
Designed by Al Merrick for the Fish Board model. With a focus on speed and flow, this is a true performance keel. Al's modern template ocmbined with a progressive flex allows for excellent control for power surfing
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$199.00 -
Fcs2 Carver Perfomance Glass Quad Side Small
Side byte set designed for 2+1 setups on longboards and SUP's.
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
$144.95 -
-
Fcs2 Performer Neo Glass Eco Tri Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Size
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgNeo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm
$134.95 -
Fcs2 Reactor Neo Glass Tri Evo Fin
The ideal fin for surfers who like to perform fast, progressive turns. Best suited to hollow waves, and particularly good for beach breaks. The Reactors upright template allows for tighter, more acute directional changes. Constructed with 50% glass and bio-resin, the Neo Glass Eco Reactor has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
- Medium Tri (3) Fins
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Size
MEDIUM
- 65Kg - 80Kg
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Neo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.
$134.95 -
Fcs2 Julian Wilson Tri Fins - Army Camo
Julian Wilson's 'JW' signature fin featuring AirCore construction.
Fast, Ultra Light with Quick Response.Overview
- Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
- Updated in PC construction featuring our ultralight AirCore.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.GROM/X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$229.00 -
Fcs2 Kolohe Andino Tri Fins - Black Blue
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
FCS II Reactor PC Tri Fin Set - Charcoal/Black
Speed â& tight turns. Ideal for hollow waves and beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.22 107 4.41 112.0 14.45 9324 32.0° Flat SML Ctr 4.17 105.8 4.3 109.1 13.44 8672 31.0° 50/50 MED Side 4.33 110 4.53 115.0 15.23 9824 32.0 Flat MED Ctr 4.28 108.7 4.41 112.0 14.22 9172 31.0° 50/50 LRG Side 4.44 112.8 4.65 117.9 16.00 10324 32.0° Flat LRG Ctr 4.39 111.4 4.52 114.8 14.99 9672 31.0 50/50 .
$179.95 -
FCS II H4 Quad Rear Fins
The H4 looks and surfs different to any other fin. Precision Swiss engineering matched with a highly evolved template provides an unprecedented level of control and predictability at high speeds.
Quad Rears designed to work with both medium & large H4 sets.
Overview
This set comes equipped with 2 x Quad Rear Fins, designed to work with both medium & large H4 sets.
UNIQUE TEMPLATE
While the science behind the template, materials & the foils are highly complex. Every component of this fin has been engineered to create a simple synergy between the fin & the surfboard, the rider & the wave.
- REAR FIN SYNERGY: The H4 quad combines the power + control of the H4 thruster, with the added speed & drive of a quad.
- QUAD REAR PROFILE: A similar hybrid outline on the front and rear fins helps minimise turbulence + provides a smooth and predictable feel.
- ENHANCED FOILS: Revolutionary new foil designed to grip longer through turns and promotes perfect rail to rail transitions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
NEW CONSTRUCTION
- PRECISION SWISS ENGINEERED: Creates perfect synergy between fin geometry & HI-FI materials, giving smooth & predictable feel.
- HIGH DENSITY UNI-DIRECTIONAL CARBON FIBRE: Light & super strong with custom orientation to transfer more of your energy into speed than any other fin.
- DYNAMIC TRAILING EDGE: Internal composite morphs under extreme load, enabling the fins to be pushed harder without sliding out.
- INNOVATIVE PRODUCTION: Highly specialised robotic automation combined with camera assisted quality control, ensures absolute accuracy.
$189.95 -
FCS II Mark Richards ‘78 Twin Fin Set
This is MR’s original retro twin template, intended to be used without a stabiliser for maximum drive and pivot.
Overview
- The Limited Edition FCS II MR ’78 takes us back to a time when Mark was revolutionising the way surfers approached the wave, and how they manoeuvred their boards.
- Mark Richard's famous twin template produces exceptional drive and speed.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins have a rigid, highly responsive flex pattern that’s generally isolated towards the tip of the fin. This construction is widely used by advanced and pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
L-XL 5.19 131.8 6.05 153.6 22.99 14830 29.3° Flat $244.95
