Fcs2 Christenson Pg Mid Tracker Blk 7.5
You may also like ...
-
Single fin designed for controlled flowing turns.
OVERVIEW
- Drive hard off the bottom and perform controlled flowing turns.
- Neutral fin with elongated base.
- Provides excess drive and hold for longer turns and trim stability.
- Suited to a more laid back style of longboarding.
- Designed to be used as a single fin.
THE FCS II TOOL-LESS LONGBOARD SYSTEM
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
FIN MATERIAL
PERFORMANCE GLASS
FIN SPECS
FLOW 8"
Base: 6.76" / 172mm
Depth: 7.99" / 203mm
Area: 30.96" / 19973mm²
Sweep: 34.8ºFLOW 9"
Base: 7.61" / 193mm
Depth: 9.01" / 229mm
Area: 39.18" / 25278mm²
Sweep: 34.8ºFLOW 10"
Base: 8.46" / 215mm
Depth: 9.99" / 254mm
Area: 48.37" / 31208mm²
Sweep: 3?4.8ºFLOW 11"
Base: 9.10" / 231mm
Depth: 10.75" / 273mm
Area: 56.00" / 36130mm²
Sweep: 34.8º$159.00 -
Versatile, high performance fin. Connect turns and move up and down the board. Plate & screw fastening.
Overview
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
2 + 1 Compatible.
- Plate & screw fastening.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$154.95 -
Fcs2 Thomas Bexon Signature Fin - Bloom
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that really flexible fins can give at times." - Thomas Bexon.Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box require
$189.00 -
FCS II HATCHET PG LONGBOARD FIN
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
Ideal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.95 -
FCS II Connect PG Longboard Fin
Versatile, high performance fin. Connect turns and move up and down the board.
Overview
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
- Based on the FCS Dolphin Longboard template.
2 + 1 Compatible.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$169.00 -
FCSII Pivot Performance Glass Fin - Charcoal Grey
Overview
- Pivot in the pocket, lock the rail on the wave face and run the nose.
- Upright fin with minimal sweep and base.
- Loose fin for performing tighter turns.
- Bigger sizes ideal for logs and nose riding (9" + 10").
- 2 + 1 Compatible.
- Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$209.95 -
FCSII Pivot Performance Glass Fin - Charcoal Grey
Overview
- Pivot in the pocket, lock the rail on the wave face and run the nose.
- Upright fin with minimal sweep and base.
- Loose fin for performing tighter turns.
- Bigger sizes ideal for logs and nose riding (9" + 10").
- 2 + 1 Compatible.
- Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$209.95 -
FSC II Machado Single Performance Glass 7"
Rob Machado's new 7" single fin provides speed through open sections and pivot in the pocket.
Designed specifically for the rounded template of the Firewire Sunday, this fin will provide speed through the flat and pivot where you need it.
Wide base that gives drive on open sections and a shorter height that makes it easy to maneuver.
Firewire Sunday - Surfed as both a short board or mid-length, Rob Machado template allows long drawn out turns
FCS II Rob Machado Sunday Single side bytes compatible
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.$159.00 -
Fcs2 Connect Glass Flex Center Fin
Versatile, high performance longboard fin for all conditions. Seamlessly connect turns and move up and down the board.
Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
2 + 1 Compatible.The FCS II Tool-less Longboard System
No need for a plate and screw.
Ability to adjust your fin position in the box mid surf.
Easily insert or remove your fin in seconds. No fin key required.
Designed to be used in most existing Longboard boxes. No new box required.Fin Material
GLASS FLEX - Injection moulding process ensures geometric accuracy and provides a reliable and consistent feel. These fins are ideal for novice surfers because the relaxed (subtle) flex of these fins can be engaged with minimal effort, and as the flex returns to a neutral position the fin produces a whip-like effect that propels the board forward, and helps to maintain speed and acceleration.
Fin Specifications
Name Base Depth Area Sweep Foil Connect 6" 4.27" / 108mm 6.00" / 152mm 17.65" / 11390mm² 33.7º 50/50 Connect 7" 4.99" / 126mm 7.01" / 178mm 24.05" / 15518mm² 33.7º 50/50 Connect 8" 5.64" / 143mm 7.96" / 202mm 30.71" / 19812mm² 33.7º 50/50 Connect 9" 6.43" / 163mm 9.03" / 229mm 39.91" / 25748mm² 33.7º 50/50 Connect 10" 7.13" / 181mm 10.01" / 254mm 49.06" / 31653mm² 33.7º 50/50 $69.00 -
FCS II Performer Single Fin
The Performer Single fin features the FCS II toolless Long board fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set up.
Overview
The Performer Single fin features the FCS II toolless LB fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set-up.
Available in M, L and XL thruster sizes, the Performer template is regarded as a versatile, all-round fin for all conditions. It can be paired with Performer side fins, or any other side fins to convert a 2 + 1 into a thruster, essentially making the board looser and more responsive.
The tooless fin base also allows the fin to be easily moved forward and back in the box to the desired position for optimum performance. This customisable feature can be utilised while the surfer is in the water. No other system can offer this feature!
- Thruster Fin with toolless FCS II Single Base
- Converts single box to thruster set-up
- Performer M, L, and XL sizes
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.37 111.0 4.55 115 14.81 9554 33.7 TBC LRG 4.48 114.0 4.67 118 15.58 10054 33.7 TBC XL 4.59 117.0 4.78 121 16.36 10554 33.7 TBC $144.95 -
FCS II Performer Single Fin
The Performer Single fin features the FCS II toolless Long board fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set up.
Overview
The Performer Single fin features the FCS II toolless LB fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set-up.
Available in M, L and XL thruster sizes, the Performer template is regarded as a versatile, all-round fin for all conditions. It can be paired with Performer side fins, or any other side fins to convert a 2 + 1 into a thruster, essentially making the board looser and more responsive.
The tooless fin base also allows the fin to be easily moved forward and back in the box to the desired position for optimum performance. This customisable feature can be utilised while the surfer is in the water. No other system can offer this feature!
- Thruster Fin with toolless FCS II Single Base
- Converts single box to thruster set-up
- Performer M, L, and XL sizes
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.37 111.0 4.55 115 14.81 9554 33.7 TBC LRG 4.48 114.0 4.67 118 15.58 10054 33.7 TBC XL 4.59 117.0 4.78 121 16.36 10554 33.7 TBC $144.95 -
FCS Clique Screw & Plate Longboard Fin
An upright fin with a short base. Very manoeuvrable yet forgiving when linking turns. Works well with a 2+1 set-up.
Overview
Versatile, well-balanced template. A shorter base makes it highly manoeuvrable. Slim, tapered tip provides a high level of forgiveness and turning freedom. Suited to traditional and performance longboards.
Slim, tapered LB template
Highly manoeuvrable and forgiving
- Plate & screw fastening.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fibreglass. These fins are stiff and are widely used by pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
7" 4.74 120.3 7.01 177.8 21.95 14162 34.5° 50/50 8" 5.42 137.5 8.01 203.2 28.67 18497 34.5° 50/50 9" 6.10 154.7 9.01 228.6 36.29 23410 34.5 50/50 $149.95
