60ml

Sponge Rez Body Board Repair 60ml

Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.

General Directions:

1. Surface should be clean, dry, and free of dirt, and or wax.
2. Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
3. Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
4. Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.

SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.

• No mixing necessary. UV curing assures complete hardening.
• Provides complete crosslinking
• Remarkably tough and resilient
• Contains urethanes that keep from yellowing
• Eco-freindly ZERO vapors, non-flammable.
• Comes with 60/240 grit sand pad.