6'10"

" Torq's MODERN FISH DESIGN IS BUILT FOR SPEED.”

6'10" JC Equalizer - This board rips! While the full nose, ample volume and extra ??Hawaiian?? entryrocker will allow you to catch waves easily, you??ll still be able to do full power arcs in critical sections.

LENGTH: 6'10" 208.28 cm
NOSE: 12.8" 32.51 cm
MID: 20" 50.80 cm
TAIL: 14.6" 37.08 cm
THICK: 2.5" 6.35 cm
VOLUME: 39cc
FINS: FCS
TECHNOLOGY: Tuflite

Torq Tec Rusty Egg Not - White

Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.

TEC - TORQ EPOXY COMPOSITE

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.

The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.

This design is the first Nugget, Geoff McCoy shaped in 1994. Proven to be a very versatile performer in a wide range of wave conditions from 1ft to 8ft all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”
Geoff McCoy

Flax fibre cloth is an engineered reinforcement fabric made from the bast of the flax seed plant. While flax fibre is one of the oldest cultivated fibres for textiles, it is only recently that its use as a fibreglass substitute has been acheived. Incorporating flax fibre cloth in the lamination reduces the use of regular glass by 1/3rd and adds a great earthy look and more importantly helps lower our carbon footprint.

SR GreenPoxy 56 is an epoxy resin which has up to 56% of its molecular structure coming from plant origin. This percentage is function of the carbon origin contained in the epoxy molecule. The final rate of the mix bio-based carbon content will depend on the hardener choice.

The manufacture of EPS foam does not involve the use of toxic isocyantes used in the production of regular surfboard blanks. Expanded Polystyrene (EPS) foam is light weight and has fantastic shock absorbing properties, making it ideal for surfboards. EPS foam has more buoyancy and flotation increasing paddling speed and maneuverability.

The Surfboard Agency has teamed up with the first, independent 3rd party consumer-facing “eco-label” for boards, the ECOBOARD Project is focused on reducing carbon footprints, increasing the use (and reuse) of renewable, recycled and up-cycled inputs, and reducing toxicity within the surfboard manufacturing process.

*No Fins Included - Recommended Fin: FCS II Accelerator