Torq Tec Hybrid
This is a true one board quiver. Up front you have a ‘fish’ like nose – wide through the 12” mark with an easy entry rocker and single concave. From the mid point back, the template narrows in a long curve into a rounded pin tail with a little more rocker under the back foot and a double concave to vee behind the fins.
This combination makes a board that paddles well and catches waves like a fish but also performs in more critical waves. Under your front foot the board is fast and accelerates quickly, with speed to burn. As you transfer your weight to your back foot the combination of the round pin and double concave makes the board sharp and responsive, easily capable of holding a high line in the barrel or deep gouging carves.
With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.
| Dimensions | Volume |
| 5’8 x 20” x 2 3/8” | 30.6 l |
| 6’0 x 20 1/2” x 2 5/8” | 35.7 l |
| 6’4 x 21” x 2 3/4” | 40.2 l |
| 6’8 x 21 1/2” x 2 7/8” | 44.9 l |
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
6'4" JC Peter Mel Machine - Built for Peter Mel, with a wider nose and tail and medium entry rocker, this board is a high performance shortboard for a bigger surfer. Great for the bigger surfers that want to rip or the rest of us that just want to catch waves a bit easier, SO WE CAN RIP!
LENGTH: 6'4" 193.04 cm
NOSE: 11.9" 30.23 cm
MID: 19.35" 49.15 cm
TAIL: 14.5" 36.83 cm
THICK: 2.35" 5.97 cm
VOLUME: 30cc
FINS: FCS$1,180.00 -
6'10" JC Equalizer - This board rips! While the full nose, ample volume and extra ??Hawaiian?? entryrocker will allow you to catch waves easily, you??ll still be able to do full power arcs in critical sections.
LENGTH: 6'10" 208.28 cm
NOSE: 12.8" 32.51 cm
MID: 20" 50.80 cm
TAIL: 14.6" 37.08 cm
THICK: 2.5" 6.35 cm
VOLUME: 39cc
FINS: FCS
TECHNOLOGY: Tuflite$1,129.00 -
A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.
With 5 Futures fin boxes, the Summer 5 can be ridden as Quad or Thruster.
Dimensions Volume 5’6 x 21” x 2 3/8” 32.3 l 5’8 x 21 1/2” x 2 1/2” 35.2 l 5’10 x 22” x 2 5/8” 38.3 l 6’0 x 22 1/2” x 2 3/4” 41.8 l 6’2 x 23” x 2 7/8” 45.4 l $819.00 -
The Black Panda is a feature packed groveller which absolutely flies down the line and can be turned on a dime.
It has lot of available volume squeezed into a small board to keep the foam both under your chest and feet. The outline is wide which is offset by a flyer by the fins that keeps the tail width more refined. The tail is the often overlooked diamond tail, which has the benefits of the bite of a swallow tail with the hold and control of a rounded pin tail and perfectly sets up the the water flow of the bottom contours. The Black Panda has a soft channel that runs right through the centre of the board and feeds water to the fins, this gets it up and running really quickly and when put on rail feels like it is on tracks.
The Black Panda, being a groveller, is best ridden with one or two litres more than your shortboard. Summer surfs and lousy looking waves will never look more fun than with a Black Panda in the quiver.”
Jonno Cole
Built using the latest in EPS/Epoxy materials; The XEPS technology combines a lightweight EPS core with High Grade fiberglass cloth and Epoxy resin.
LENGTH WIDTH THICKNESS VOLUME 5’0 20 1/4 2 1/4 25.86 5’2 20 1/2 2 3/8 28.47 5’4 20 3/4 2 1/2 31.24 5’6 21 2 5/8 34.16 5’8 21 1/4 2 5/8 35.67 5’10 21 1/2 2 3/4 38.83 6’0 21 1/2 2 3/4 39.99 6’2 21 2/4 2 7/8 43.45 Was:$945.00Now:$699.00Price:$699.00 -
Torq TET Mod Fish 6'3"
With a shape that’s more today than yesterday, Torq's modern “fish” design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too. Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose. Tune to your taste with Tri-Quad option.
Board Features
- Length: 6'3"
- Width: 20 1/2"
- Thickness: 2 1/2"
- Volume: 36 l
- Construction: EPS/ Epoxy
- Conditions: 1 to 4ft
- Fins: 3 x Futures Fin Boxes (Fins Included)
Level 2 > Expert Wave Height 2 - 6ft+ Dimensions 6’3” x 20 1/2” x 2 1/2” Recommended Rider Weight 45-75 kg / 100-165 lbs Volume 36.0 ltr $769.00 -
ELEMNT Mid Length - Sky
An easy to ride mid sized all rounder, classic concept with a modernised design. low rocker and a combination of single & double concave plus vee, medium rails with forward volume, Paddles extremely well with lots of drive, and pivot can be easily adjusted with the 1 + 2 fin set up, single fin box plus side bites.
Construction: EPS/epoxy
Fin System: FCSII / Future sides plus Single fin box
Rocker: low
Bottom Contours: rolled vee to single/double concave with vee out the tail
Tail Shape: round tail.
Does not come with fins.
- 6’8" 21" 2 3/4" 40.50L
- 7’0" 21 1/8" 2 13/16 44.50L
- 7’2" 21 1/4" 2 7/8 46.50L
- 7’6" 21 3/4" 2 15/16" 51L
- 7’10" 22" 3" 56.50L
$995.00 -
ELEMNT Wild Cat - Dune
Elemnt's Wild Cat Dune has a wider outline plan shape with pulled in round tail, flat bottom rocker combined with a little nose and tail kick.
Lots of volume throughout concentrated from centre point forward under chest area. Fuller rails with single concave bottom running from nose into double concave through fin area and out tail.
Multi fin allows you to run between classic single fin, 2+1 single plus sides, quad fin or twin fin setup.
Construction: EPS/epoxy
Fin System: Multi Fin FCSII /Futures + single fin box
Rocker: medium nose entry, low off the tail
Bottom Contours: subtle single to double concave
Tail Shape: Pulled in round tail.
Does not come with fins.
Dimensions:
- 6’4 21" 2 11/16" 40.02L
- 6’6 21 1/2" 2 3/4 " 43.12L
- 6’8 21 3/4" 2 13/16" 45.62L
- 7’0 22 1/8" 2 7/8" 50.54L
- 7’2 22 1/2" 3" 54.84L
$995.00 -
Torq Tec Multiplier - White
The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high performance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low.
The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it.
Comfortable in waves from 2-6ft this is an all round shredder that will maximise your surf time.
5’8 x 19 7/8” x 2 1/4” 28.8 ltr 5’10 x 20 1/8” x 2 3/8” 31.2 ltr 6’0 x 20 3/8” x 2 1/2” 33.6 ltr 6’2 x 20 5/8” x 2 5/8” 36.3 ltr 6’4 x 20 7/8” x 2 3/4” 38.8 ltr 6’8 x 21 3/8” x 2 7/8” 43.7 lt 
$849.00 -
Torq Tec Rusty Dwart White
This board literally walks on water. Better yet, runs on water. We’re talking easy paddling, a fast ride, effortless glide, and lip blasting vertical capabilities, all packed into one board. The Dwart takes the basic elements of a modern fish and fuses them with a few high-performance design techniques to take it to the next level. You want a board that does it all? The Dwart is the best yet.
TEC 5’6 x 20.25” x 2.32” - 29.2 ltr 5’8 x 20.5” x 2.42” - 31.8 ltr 5’10 x 20.75” x 2.5” - 34.3 ltr 6’0 x 21” x 2.56” - 36.6 ltr 6’2 x 21.25” x 2.63” - 39.1 ltr 6’4 x 21.5” x 2.72” - 42.1 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,049.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.” Geoff McCoy
Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,145.00
