XCEL REEF BOOTIE 1MM
The Xcel Reef Bootie is a 1mm lightweight flexible split toe boot made with a superlight neoprene engineered to fit your feet. Walk on rocks or reef without hurting your feet!
You may also like ...
-
The liquid dipped Rip Curl Rubber Soul offers the ultimate in performance and water tight seal. This boot is a minimalist's dream. Lightweight, warm, water tight, and durable.
Features
- Liquid neo coating
- 100% waterproof seal
- Easy Slide on System (SOS)
- 2mm split toe
$79.00 - Liquid neo coating
-
Features.
Plush thermo lite = warmth.
Quick dry fibers = stay dryer.
Pull up ankle loop = easy entry.
Single rubber bottom = board feel.
Taped seams = durability.
Engineered design = contoured fit.$99.00 -
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.$89.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom Pro 2.0 integrates our new 3-Point Strap with the 2.0 Sole for precision fit and instant response. We've also upped the warmth even more with our new metal-grid Thermal Rebound plush lining. Simply put, our Custom Pro 2.0 is the best watersports boot in the world. Full stop. Here's why:
3D Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom Pro 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
3-Point Strap with Floating D-Ring
Another Solite innovation, our 3-Point Strap anchors under both the arch and heel on the inside of the foot, and under the heel on the outside of the foot. When the strap is tightened, the boot snugs up evenly under the arch and through the rear of the boot, providing instant response and slop-free fit for all arch and ankle profiles. Our Floating D-Ring on the strap isn't stitched in place, allowing it to "float" naturally to the optimal position on your foot. Our 3-Point Strap is also 100% Tatex-coated for extra durability and zero water absorption.
Thermal Rebound Lining
The Custom Pro 2.0 features a unique Thermal Rebound plush, quick-dry interior lining material in the upper. This material features a thin, flexible metallic grid-layer between the neoprene and the outer lining, reflecting body heat back to the skin for enhanced warmth. Lab tests on the Thermal Rebound laminate show an increase in insulation exceeding 10%, which extends your sessions and increases your odds of getting the wave of the day.
Tatex Flex-Spine
The calf area features our exclusive Tatex Flex-Spine. The Flex-Spine serves three distinct purposes:
- Enhances durability with an abrasion resistant rubbery surface.
- Reduces stretch to act like a shoe-horn, making it easier to slide your heel into the boot.
- Provides a sticky external surface to grab your wetsuit leg and prevent flushing.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with liquid seam seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$159.00 -
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:
3D-Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior
Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
- Makes boots easier on-off and reduces stress on seams.
- Increases comfort by providing a soft barrier between the feet and the Thermofoam sole.
- Adds warmth to extend session length and comfort.
- Absorbs excess water from flushing to prevent puddling in the boots.
- Absorbs bacteria to reduce bootie-stink.
- Machine wash and dry for convenience.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
$129.00 -
Rip Curl Flashbomb Hiddden Split Toe 5mm Booties
The Rip Curl Flashbomb 5mm Hidden Split Toe Booties are lifesavers when winter and cold water hits. Featuring a 0.6mm sole with textured grip, ultra flexible soft soles, you'll feel more dialled in than ever.
Designed with sealed seams to keep water out, detailed with Flash Lining interior that dries rapidly. These boots are made for surfing, no matter how harsh the conditions.
Features:
- Flash Lining
- 0.6mm thin rubber sole
- Ankle and foot strap
- Slide on easy S.O.S system
- Textured grip print
- Anti-stink treated
- Seam sealed
$139.00 -
Rip Curl Flashbomb 3mm Narrow Hidden Split Toe Booties
Nothing worse than icy, numb extremities! With the Flashbomb 3mm Booties you can surf to your hearts content and stay warm and connected to your board for longer. Featuring flash lining for quick drying, you'll never have to put on a soggy boot again. Seam sealed, easy to slide on, and finished with an odour-phobic treatment that keeps them smelling sweet.
- Flash lining
- Stitchless compression strap
- Supersoft sole
- Easy slide on system
- Cold water
$119.00 -
O'Neill Hyperfreak Fire 3mm Split Toe Wetsuit Boot 3mm - Black
O'Neill Hyperfreak Fire 3mm boots are the remedy for Keeping the Cold Out.Stay covered Head-to-Toe in O'Neill's HyperFire 3mm Split Toe Wetsuit Boot, designed to shield you from the harshest conditions. Our world-class athletes search the planet for perfect surf, the R&D team at Area 52 developed product to allow you to perform in the most extreme elements and excel in the coldest climates.- TB4 Firewall
- Glued and Blind Stitched Seams
- Adjustable Fit Strap
- Anti-Flush Shin Strap
- Durable Outsole
- 3mm
$119.00 - TB4 Firewall
-
O'Neill Hyperfreak Ninja 3mm Split Toe Wetsuit Boot - Black
Lightweight warmth, sensitivity of board feel under foot, grippy, TB3X comfort upper, durable supportive lower and heel- TB3-X /Durable Krypto Forefoot
- Glued & Blind Stitched Seams
- Anatomical Fit
- Anti-Flush Shin Strap
- Lightweight Sole
- 3mm
- Sizes 5 -13
- O'Neill Hyperfreak Series
$89.00 - TB3-X /Durable Krypto Forefoot
-
O'Neill Defender Split Toe 3mm Wetsuit Boot - Black
The O'Neill Defender 3mm boot is the remedy for Keeping the Cold Out. Ultraflex DS neoprene, Anti-Flush Shin Strap and PolarFlex liner all rolled into a durable and reliable winter asset.- UltraFlex DS Neoprene
- Glued Blind Stitched + Taped Seams
- Durable Outsole
- Anti-Flush Shin Strap
- 3mm
- PolarFlex Liner
- Sizes 5-14
$99.00 - UltraFlex DS Neoprene
