Fcs2 Carver Glass Flex Quad Rear - Black

Powerful, drawn-out turns. Excels on open face waves.

OVERVIEW

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and and draw out their turns.
• Two Quad Rear fins.

IDEAL CONDITIONS

Open face, down-the-line waves, particularly good in point and reef breaks.

BOARD TYPES

Recommended for boards with deep concaves and moderate-to-extreme rocker.

Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

FIN MATERIAL - Glass Flex

Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

FIN SIZE

SMALL (55Kg - 70Kg)
MEDIUM (65Kg - 80Kg)

FIN SPECS: SMALL

Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"² / 7140mm²
Sweep: 33.2º
Foil:  50/50

FIN SPECS: MEDIUM

Base: 4.14" / 105mm
Depth: 4.21" / 107mm
Area: 12.63"² / 8150mm²
Sweep: 33.2º
Foil: 50/50

Speed & tight turns. Ideal for beach breaks.

Overview

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.
• Quad Rear (2 fin) set.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg 
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Balance of speed, flow and response. Suitable for all conditions.

Overview

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• Quad Rear (2 fin) set.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg 
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

FCS2 Seaside Quad is Rob Machado’s first signature FCS II fin template. Designed specifically for his Firewire Seaside model, this semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.

GEOMETRY

This quad set is based on Rob’s signature FCS II RM Keel twin template that’s set for release later in 2019. Essentially, the two keels have converted it into four fins by extracting area from the back of the keel and re-shaping it into a mini trailer fin.

The trailer has a low profile but is robust, while the side fins retain the look of a traditional keel with a narrower profile. Overall, this high-area quad set has soft, smooth curves that directly translate to how it feels in the water.

PERFORMANCE

Designed specifically to compliment Rob’s Seaside Firewire model. Overall this set has lots of surface area offering a trustworthy feel with an underlying level of response and performance.

The side fins produce an abundance of drive and forward acceleration. The small trailer fins (quad rears) allow you to break the line and turn in a tight arc when the wave presents steeper and more critical opportunities.

Ideally suited to smaller, weaker waves, this set is adaptable to many higher volume hybrid surfboard models.

CONSTRUCTION

Performance Glass fins are machine cut from layers of solid fiberglass. These fins are stiff and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

Fcs2 Carver Performance Glass Quad Size - Small

Powerful, drawn-out turns. Excels on open face waves.

OVERVIEW

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and and draw out their turns.
• Two Quad Rear fins.

Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.

FIN MATERIAL

PERFORMANCE GLASS

Fin Specs

Base: 3.86 in. 98 mm
Depth: 3.93 in. 100 mm
Area: 11.07 in.² 7140mm²
Sweep: 33.2º
Foil: 50/50

Fcs2 Carver Perfomance Glass Quad Side Small 

Side byte set designed for 2+1 setups on longboards and SUP's.

• Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up. 
• Neutral, well balanced template.

• Glass Flex

  Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.

  Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Suitable for longboards, SUP's or as shortboard quad rears.