Creative Army Jumbo Jet SLX
Creative Army Jumbo Jet SLX
Check out these real-life scenarios: You feel under volumed and the struggle of paddling is real. You catch the wave but the surfboard so unstable you can't get to your feet. Your home break is weak and small most of the time. You are a big human that can still surf really well but there's not a surfboard out there that has enough foam/volume for you. If you are relating to any of these scenarios then the Jumbo Jet is here to get you fully stoked.
The Jumbo Jet has a 2 + 1 fin set up that turns easily thanks to the smooth lines of the round tail. Complimented by a tucked edge in the tail and modern rocker the Jumbo Jet accommodates the surfer that wants to go down the line, hit the section, and move the board where ever it needs to go.
Throw in a little nose concave to help create lift for those heavier surfers allowing them to nose ride like a champ. The Jumbo Jet goes well in all conditions from small crappy beach breaks to beautiful points and steeper more challenging waves.
The shorter versions of the Jumbo Jet (7'2 and 8’0) will work a treat, they’re like the 'big guys' shortboard. These boards are for anyone that needs a little bit of help increasing their wave count. The extra volume allows you to paddle with ease, get in early, and give you more time to get to your feet. I'm so stoked on this board it's got my Dad back in the water in his Mid 60's after 10 years out due to injuries and it has got him frothing. Hope you get the same stoke.
NOTE: Centre fin supplied with this board / Rider weight is based on board volume and intermediate rider skill level
| LENGTH | WIDTH | THICK | VOLUME | FINS | APPROX WEIGHT RANGE |
|---|---|---|---|---|---|
| 7'2 | 23 1/2" | 3 1/2" | 65.28ltr | FCS 7" CA Custom Fin (supplied) | 85kg or less |
| 8'0 | 23 11/16" | 3 5/8" | 78.05ltr | FCS 7" CA Custom Fin (supplied) | 85kg + |
| 9'0 | 24 1/16" | 3 7/8" | 97.05ltr | FCS 8" CA Custom Fin (supplied) | Ideal for all weights |
| 9'6 | 24 1/4" | 4" | 106.36ltr | FCS 8" CA Custom Fin (supplied) | Ideal for all weights |
| Construction | SLX Epoxy |
| Board Contours | Modern Contours |
| Rail | Neutral Rail |
| Surfer Skill Level | Intermediate - Advanced |
| Wave Height | 0-6ft
|
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
9'6" Jacobs Noserider
Built for stability and noseriding with slight kick in the nose and tail for enhanced paddling and wave catching. If you like stability and to stay on the nose this old school shape is ideal. Good for small to mid conditions.
- Nose Width 18 7/8"
- Board Width 22 1/2"
- Tail Width 14 3/4"
- Thickness 2 7/8"
- Volume 72 ccm
- Board Fin System Surf 10"
- Board Shaper Hap Jacobs
**Colours May Vary**
Only Colour Left White With Red Stripe
$1,999.00 -
From gliding and tip riding to surfing in powerful conditions, the requirement for a modern longboard is versatility. Our design delivers, covering all terrain. From young to old, new school through traditional styles, the first wave rides to decades of experience.
With low entry rocker and full outline, you’ll find a board that glides in the small stuff and can be ridden from the front. Progressive surfers will find a quick midsection, slightly pulled tail, with enough release to keep the board fast and loose. 2+1 fin set up.
The fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The Torq Longboard comes with a 2+1 set up, offering all-round performance with the option of single fin only.
$929.00 -
“Longboard – from 8’6 to 9’6 the Fun Division Longboard has all the elements of traditional longboards and modern features with an emphasis on just catching a wave, big or small, and riding it to the beach, turning, walking and nose-riding. High volume equals loads of fun all day every day!”
Jonno Cole
LENGTH WIDTH THICKNESS VOLUME 8’6 22 3/8 2 7/8 63.65 9’1 22 3/4 3 72.89 9’6 23 1/4 3 1/4 84.33 $1,295.00 -
The Walden MAGIC Model stands the test of time due to its versatility and unique design features. With an emphasis on performance, with a single concave running from the nose through to the midpoint creates lift and stability, which is perfect for controlled nose riding.
***Fins Not Included
Length Width Thickness Volume (L) 8'0" 21.9" 3.0" 61.7L 8'6" 21.9" 2.9" 63.2L 9'0" 22.1" 3.25" 73.9L 9'6" 23.25" 3.3" 86.3L 10'0" 23.5" 3.4" 92.1L $1,639.00 -
Torq Tec The Don HP
Modern longboarding has a variety of skill and style that is hard to compare in any other sport. Depending on the surfer, or the wave, or the board, it can be a dance or a martial art. It can be light footed poise or powerful drive, straight line trim or vertical snaps, nose rides or carves. A true modern high performance longboard has to be capable of all of these things.
Torq Tec's The Don range has 3 models which fill all of these needs – The Don is stable on the nose, straight and fast through the middle and lively in the tail. The HP model is a finer turned race car, but capable on the nose. The XL is higher volumed and nose oriented but still super responsive in the tail. The added advantage of the Torq TEC construction; lightweight, strong and super responsive makes the wide repertoire of moves easier and more dynamic.
In Torq Tec's the Don all round longboard series, the HP model is the high performance model; a fine turned race car. It has a slimmed down outline and foil, lower rails and slightly more rocker making this a razor sharp blade for dynamic modern longboarding. Still capable on the nose when the right section stands up, the Don HP is a board for experienced longboarders to switch up to beast mode.
The combination of high performance shape and our lightweight cutting edge TEC construction creates a board that will surprise you with it’s performance and versatility.
Dimensions
9’1 x 21 7/8” x 2 13/16” 62.9 ltr 
Construction
$1,249.00 -
Appealing to those who are looking for more volume and better glide than a funboard, but aren’t interested in a full-size longboard. Great performance in thigh-high to slightly over head-high waves, this board is a tremendous wave catcher.Appealing to those who are looking for more volume and better glide than a funboard, but aren’t interested in a full-size longboard. Great performance in thigh-high to slightly over head-high waves, this board is a tremendous wave catcher.
A low entry rocker gets you moving and provides the glide needed on smaller, weaker days. We packaged just enough tail rocker to allow it to perform in quick beach breaks or as the surf increases.Specs.
2+1 fin set up.
Level 1 > ExpertWave.
Height 2 - 6ft.
Dimensions 8’6” x 22 1/2” x 3 1/8”.
Recommended Rider Weight 60-120kg / 130-260lbs.
Volume 67.2 l.$909.00 -
Aloha Fun Division Long XE - Clear
Epoxy construction Longboard – from 8’6 to 9’6 the Aloha Fun Division "Longboard XE has all the elements of traditional longboards and modern features with an emphasis on just catching a wave, big or small, and riding it to the beach, turning, walking and nose-riding. High volume equals loads of fun all day every day!"Jonno Cole
FCS2 FIN
LENGTH WIDTH THICKNESS VOLUME 8'6 22 3/8 2 7/8 63.65 9'1 22 3/4 3 72.89 9'6 23 1/4 3 1/4 84.33
$1,145.00 -
Torq Tec Delpero Classic Model - 9'2"
EDOUARD DELPERO CLASSIC
CROSS STEP WITH GRACE, TURN WITH EASE.
Alain Minvielle has extensive shaping experience in California and a fine appreciation for the flow and glide of the classic style. With Edouard’s input they have created a Classic shape inspired by the classic 60’s model of Longboarding (no edge) while adding some more modern bottom line to find the perfect cruiser with surprising manœuvrability.
The critical part of this design is in the rocker and volume distribution - the curve of the rocker will allow you to maintain noserides in the pocket while gliding in small conditions as much as in larger waves. Finally the unique distribution of volume through the board, from a thick nose to a thin tail, will allow you to cross step with grace and turn with ease.
DIMENSIONS
TEC 9’2 x 23” x 3 1/8” - 77.2 ltr $1,599.00 -
Torq Tec Delpero Pro Model - 9'1
EDOUARD DELPERO PRO
SMOOTH PROGRESSIVE LINES AND CRITICAL NOSERIDES
This is the model Edouard won his 2019 Surf Relik World longboard title on.
Edouard and Alain worked on that shape to find the perfect balance of modern and classic surfing on a Longboard.The aggressive outline and rocker will allow you to manœuvre the board at your highest potential while the lift will allow you to hold noserides in critical sections of the waves.
This model took Edouard on top of the 2019 Relik World Longboard Tour, 4 WSL European titles and a win at the WSL Cuervo surf Ranch Classic in 2021 with smooth progressive lines and critical noserides.
TEC - TORQ EPOXY COMPOSITE
For lengths of 8'6 and over we have introduced a T-stringer and UD carbon triple strips on the deck and bottom for a new level of torsional strength. The torq longboard technology is incredibly strong, light and responsive.
With 3 layers of glass on the deck and 2 layers on the base, these are super strong, light and feel fast under your feet.
DIMENSIONS
ACT / TEC 9’1 x 22 1/4” x 2 3/4” - 63.8 ltr $1,549.00 -
Walden Mega Magic 2 Tuflite - 9'6"
The Walden MEGA MAGIC will float like a board that is 12"-18" longer. For the bigger guy that normally rides a 10'. With the Mega, he can ride this 9'0" without giving up float or stability.
Known by many as the “Father of the Modern Longboard,” Steve Walden shaped his first surfboard in 1961, at age 13, and never looked back. Eight years later, the native Southern Californian opened his first board factory and store in Huntington Beach, then moved to the North Shore of Oahu in 1972, where he made a name for himself as a prolific longboard shaper.
$1,979.00
