FCS II Filipe Toledo Tri Fins - Black Red
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
You may also like ...
-
Speed & tight turns. Ideal for beach breaks.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
FCS II Carver Neo Glass Eco Tri Quad
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.$199.00 -
Fcs2 Reactor Neo Glass Tri Evo Fin
The ideal fin for surfers who like to perform fast, progressive turns. Best suited to hollow waves, and particularly good for beach breaks. The Reactors upright template allows for tighter, more acute directional changes. Constructed with 50% glass and bio-resin, the Neo Glass Eco Reactor has a low impact construction with high impact performance that’s recommended for lighter more agile surfers.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
- Medium Tri (3) Fins
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Size
MEDIUM
- 65Kg - 80Kg
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Neo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.
$134.95 -
Fcs2 RM Camo Quad
Overview
- The Seaside Quad is Rob Machado’s first signature FCS II fin template.
- Designed specifically for his Firewire Seaside model.
- This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.
- Quad set containing 4 fins.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.
Board Types
- Designed to fit the FCS II Fin System.
- Excels in higher volume hybrid surfboard models.
$259.00 -
FCS II MARK RICHARDS FREERIDE TWIN FINS
Mark Richard's popular 4 x World Title twin template. Highly upright twin, making for an ultra loose feel with fast release.
Overview
The MR Freeride Twin fin takes us back to a time when Mark was reshaping the way surfers approached the wave. Cut from an old fibreglass skateboard deck, the original freeride fins paired with MR's revolutionary surfboard design changed the direction of surfboard design forever.
The Freeride twin sits very upright, making it super loose and free, with plenty of fast release off the top. The tip is more refined compared to his signature twin + 1, increasing the ability to pivot and turn on a dime.
Board Types
- Designed to fit the FCS II Fin System.
- Perfect twin fin for any retro-style board.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins have a rigid, highly responsive flex pattern that’s generally isolated towards the tip of the fin. This construction is widely used by advanced and pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$219.95 -
Fcs2 Kolohe Andino Tri Fins - Black Acid
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
$209.00 -
FCS II Mid Side Byte Fin Set - Clear
You committed to riding a midlength, so it makes sense to maximise the performance of the board by using a set of fins that allows you to perform to your full potential.
Overview
The 3.6" side bytes are derived from the historic GL template from the late '90s. This template has withstood the test of time and compliments the single by adding response and control when turning.
Surfers wanting a versatile and stable 2 + Box set for their midlength that will encourage smooth flow without restricting manoeuvrability and tighter turns performed higher on the wave.
- Side byte template for Midlengths
- PG Material
Neo Glass
Neo Glass fins are precision moulded using long-strand fibreglass and a marine-grade polymer. Very affordable yet considered a premium construction due to its high fibreglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
3.6" 3.4 87.1 3.6 92 9.3 5990 28.6° Flat View the FCS Fin Data page for Base/Depth/Area/Foil information.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP or as shortboard quad rears.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$119.95 -
FCS II Reactor Quad Rear PC Fin Set - Charcoal/Black
Speed & tight turns. Ideal for beach breaks.
Overview
Designed for speed and tight turns, with added tail release.
Upright template allows for tighter, more acute directional changes.
Smaller centre fin for increased pivot and tail release.
Ideal for surfers who like to perform fast, progressive turns.
Quad Rear (2 fin) set.
Ideal Conditions
Suitable for hollow waves, particularly good for beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$119.95 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Sharpeye PC Medium Tri Fins
Marcio Zouvi's 'Sharp Eye' shaper fin.
Overview
Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.
- Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
- High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
- Controlled high-speed turns in punchy conditions.
- Suited to performance and hybrid shortboards.
Sharpeye
Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
- Performs well in punchy conditions.
Board Types
- Designed to fit the FCS II Fin System.
- For all board types. Best suited to performance and hybrid shortboards.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)$199.00 -
FCS2 Performer Quad Fins Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fins) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgFin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Tri 4.25 108 4.43 112 14.03 9054 33.7° IFT SML Q-Rear 3.83 97 3.99 101 11.08 7150 32.4° 80/20 MED Tri 4.37 111 4.55 115 14.81 9554 33.7° IFT MED Q-Rear 4.09 104 4.26 108 12.63 8150 32.4° 80/20 LRG Tri 4.48 113.7 4.67 118 15.58 10054 33.7° IFT LRG Q-Rear 4.33 110 4.51 115 14.18 9150 32.4° 80/20 $259.00
