Fcs2 Mf Pc Blk/mango Lge Tri Retail Fins
Description
FCSII Mick Fanning Tri Fit Set - Black/Mango
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.This fin provides maximum drive.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| GROM | 4.04 | 102.6 | 4.20 | 106.6 | 12.73 | 8215 | 35.8 | Flat/Bev |
| MED | 4.33 | 110 | 4.48 | 114 | 14.52 | 9369 | 36.0° | Flat/Bev |
| LRG | 4.49 | 114 | 4.67 | 119 | 15.70 | 10131 | 36.0° | Flat/Bev |
You may also like ...
-
Fcs2 Performer Glass Flex Tri
Reliable all-round fin for a diverse range of surfers, conditions and board types.
Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
Designed for surfers wanting a combination of speed and maneuverability with flow between turn
Ideal Conditions.
A wide range of conditions from beach breaks to point breaks.
Board Types.
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Fin Specs.Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"2 / 9054mm2
Sweep: 33.7o
Foil: InsideGlass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85KgBASE ” BASE MM DEPTH ” DEPTH MM AREA ” AREA MM SWEEP
DEGREE
FOIL Performer X-S 4.13 105 4.3 109 13.26 8554 33.7 IFT Performer SML 4.25 108 4.43 112 14.03 9054 33.7 IFT Performer MED 4.37 111 4.55 115 14.81 9554 33.7 IFT Performer LRG 4.48 114 4.67 118 15.58 10054 33.7 IFT Performer X-LGE 4.59 117 4.78 121 16.36 10554 33.7 IFT $89.00 -
Speed âÂÂÂÂÂÂ& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
FCS2 Performer Performance Core Tri - Teal Black
Balance of speed, flow and response. Suitable for all conditions.Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$179.00 -
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Safe, durable and ideal for learners.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
$99.00 -
FCS 2 AM Twin +1 Performance Core Extra Large
Al Merrick Twin fin with mini stabiliser. Lowest area twin set in the FCS range.
Overview
- Lowest area twin set in the FCS range.
- The low sweep (rake) and narrow tip means these fins pivot and release exceptionally well, while maintaining incredible trim speed and the ability to quickly break into a turn.
- Mini stabiliser has a narrow, elongated template with a rounded tip to add control when driving through turns.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
$209.00 -
FCS II Carver Neo Glass Eco Tri Quad
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.$199.00 -
Fcs2 JS Modern Keel
The flow of a traditional twin fish with the control of a performance quad.
The JS Modern Keel is an upright keel template designed for the JS Red Baron and other specialty fish shapes. Featuring a wide base and a relatively small sweep (rake), this high area keel provides control through the face and pivot in a tight radius.
Overview
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & White in Performance Glass
Board Types
- JS Red Baron - The Red Baron, part of the Baron family, has a shorter and wider template with plenty of volume in the tail. It's tail width allows for speed generation through flatter sections as well as a deep double concave, this board was made with the JS Modern Keel template in mind.
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$199.00 -
Fcs2 Modern Keel Twin Fins - White
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & Clear in Performance Glass, White in new PC AirCore material.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$189.00 -
-
Fcs2 Kolohe Andino Tri Fins - Black Acid
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
$209.00 -
FCS II Al Merrick PC Tri-Quad Fin Set - Yellow
Al Merrick's 'AM' shaper fin. Raked side fins produce exceptional speed and drive.
Overview
- Al Merrick's template is designed for radical, progressive surfing.
- The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
- Tri/Quad (5 fin) set
Ideal Conditions
- Hollow steep waves, punchy beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$319.00 -
FCS II Reactor PC Tri Fin Set - Charcoal/Black
Speed â& tight turns. Ideal for hollow waves and beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.22 107 4.41 112.0 14.45 9324 32.0° Flat SML Ctr 4.17 105.8 4.3 109.1 13.44 8672 31.0° 50/50 MED Side 4.33 110 4.53 115.0 15.23 9824 32.0 Flat MED Ctr 4.28 108.7 4.41 112.0 14.22 9172 31.0° 50/50 LRG Side 4.44 112.8 4.65 117.9 16.00 10324 32.0° Flat LRG Ctr 4.39 111.4 4.52 114.8 14.99 9672 31.0 50/50 .
$179.95
