ELEMNT Wild Cat - Dune
ELEMNT Wild Cat - Dune
Elemnt's Wild Cat Dune has a wider outline plan shape with pulled in round tail, flat bottom rocker combined with a little nose and tail kick.
Lots of volume throughout concentrated from centre point forward under chest area. Fuller rails with single concave bottom running from nose into double concave through fin area and out tail.
Multi fin allows you to run between classic single fin, 2+1 single plus sides, quad fin or twin fin setup.
Construction: EPS/epoxy
Fin System: Multi Fin FCSII /Futures + single fin box
Rocker: medium nose entry, low off the tail
Bottom Contours: subtle single to double concave
Tail Shape: Pulled in round tail.
Does not come with fins.
Dimensions:
- 6’4 21" 2 11/16" 40.02L
- 6’6 21 1/2" 2 3/4 " 43.12L
- 6’8 21 3/4" 2 13/16" 45.62L
- 7’0 22 1/8" 2 7/8" 50.54L
- 7’2 22 1/2" 3" 54.84L
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
6'4" JC Peter Mel Machine - Built for Peter Mel, with a wider nose and tail and medium entry rocker, this board is a high performance shortboard for a bigger surfer. Great for the bigger surfers that want to rip or the rest of us that just want to catch waves a bit easier, SO WE CAN RIP!
LENGTH: 6'4" 193.04 cm
NOSE: 11.9" 30.23 cm
MID: 19.35" 49.15 cm
TAIL: 14.5" 36.83 cm
THICK: 2.35" 5.97 cm
VOLUME: 30cc
FINS: FCS$1,180.00 -
If you’re not quite ready to “rip and shred” on a short board, nor are you apt to “cruise” on a long board, then the Hawaiian Pro Designs Egg is the perfect solution. This model is an “eggy” looking shape that allows the rider to trim high on the wave in the middle of the board or race down the line on the tail, whichever the rider prefers. The perfect board for beginner to advanced.Donald Takayama’s legacy is a combination of the worlds best boards, best surfers and best waves, making his boards some of the most sought after in the entire surfing world. Donald Takayama was famous for his progressive designs that combined both traditional and high performance aspects into every board he made. The result was the best surfers sought out his boards to bring their surfing to the next level. Donald Takayama and Surftech worked together for over 20 years before his passing. The relationship was built on trust and a commitment to produce quality product that would compliment the designs he so passionately created. It is an honor for Surftech to perpetuate Donald’s legacy by continuing to build the most iconic and proven designs.
Dimensions:
LENGTH WIDTH THICKNESS VOLUME (L) 7'2" 21.15" 2.7" 45.5 Construction:
Carbon composite construction combined with our Fused-Cell EPS core, TL Pro Carbon (TLPC) utilize a proprietary stringer system that is custom built to each individual board. Strategically positioned carbon reinforcement laminated over a layer of high-desity foam strengthens the board while creating the lively flex pattern that can only be found in our TLPC technology.
$1,480.00 -
The Black Panda is a feature packed groveller which absolutely flies down the line and can be turned on a dime.
It has lot of available volume squeezed into a small board to keep the foam both under your chest and feet. The outline is wide which is offset by a flyer by the fins that keeps the tail width more refined. The tail is the often overlooked diamond tail, which has the benefits of the bite of a swallow tail with the hold and control of a rounded pin tail and perfectly sets up the the water flow of the bottom contours. The Black Panda has a soft channel that runs right through the centre of the board and feeds water to the fins, this gets it up and running really quickly and when put on rail feels like it is on tracks.
The Black Panda, being a groveller, is best ridden with one or two litres more than your shortboard. Summer surfs and lousy looking waves will never look more fun than with a Black Panda in the quiver.”
Jonno Cole
Built using the latest in EPS/Epoxy materials; The XEPS technology combines a lightweight EPS core with High Grade fiberglass cloth and Epoxy resin.
LENGTH WIDTH THICKNESS VOLUME 5’0 20 1/4 2 1/4 25.86 5’2 20 1/2 2 3/8 28.47 5’4 20 3/4 2 1/2 31.24 5’6 21 2 5/8 34.16 5’8 21 1/4 2 5/8 35.67 5’10 21 1/2 2 3/4 38.83 6’0 21 1/2 2 3/4 39.99 6’2 21 2/4 2 7/8 43.45 Was:$945.00Now:$699.00Price:$699.00 -
This design is the first Nugget, Geoff McCoy shaped in 1994. Proven to be a very versatile performer in a wide range of wave conditions from 1ft to 8ft all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”
Geoff McCoyFlax fibre cloth is an engineered reinforcement fabric made from the bast of the flax seed plant. While flax fibre is one of the oldest cultivated fibres for textiles, it is only recently that its use as a fibreglass substitute has been acheived. Incorporating flax fibre cloth in the lamination reduces the use of regular glass by 1/3rd and adds a great earthy look and more importantly helps lower our carbon footprint.
SR GreenPoxy 56 is an epoxy resin which has up to 56% of its molecular structure coming from plant origin. This percentage is function of the carbon origin contained in the epoxy molecule. The final rate of the mix bio-based carbon content will depend on the hardener choice.
The manufacture of EPS foam does not involve the use of toxic isocyantes used in the production of regular surfboard blanks. Expanded Polystyrene (EPS) foam is light weight and has fantastic shock absorbing properties, making it ideal for surfboards. EPS foam has more buoyancy and flotation increasing paddling speed and maneuverability.
The Surfboard Agency has teamed up with the first, independent 3rd party consumer-facing “eco-label” for boards, the ECOBOARD Project is focused on reducing carbon footprints, increasing the use (and reuse) of renewable, recycled and up-cycled inputs, and reducing toxicity within the surfboard manufacturing process.
*No Fins Included - Recommended Fin: FCS II Accelerator
$1,195.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”Geoff McCoy
Biaxial Fibre Glass has about half of its fibers aligned along the length of the cloth (0 degrees) and about halfway across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased maneuverability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fiberglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,325.00 -
Torq TET Mod Fish 6'3"
With a shape that’s more today than yesterday, Torq's modern “fish” design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too. Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose. Tune to your taste with Tri-Quad option.
Board Features
- Length: 6'3"
- Width: 20 1/2"
- Thickness: 2 1/2"
- Volume: 36 l
- Construction: EPS/ Epoxy
- Conditions: 1 to 4ft
- Fins: 3 x Futures Fin Boxes (Fins Included)
Level 2 > Expert Wave Height 2 - 6ft+ Dimensions 6’3” x 20 1/2” x 2 1/2” Recommended Rider Weight 45-75 kg / 100-165 lbs Volume 36.0 ltr $769.00 -
ELEMNT Mid Length - Sky
An easy to ride mid sized all rounder, classic concept with a modernised design. low rocker and a combination of single & double concave plus vee, medium rails with forward volume, Paddles extremely well with lots of drive, and pivot can be easily adjusted with the 1 + 2 fin set up, single fin box plus side bites.
Construction: EPS/epoxy
Fin System: FCSII / Future sides plus Single fin box
Rocker: low
Bottom Contours: rolled vee to single/double concave with vee out the tail
Tail Shape: round tail.
Does not come with fins.
- 6’8" 21" 2 3/4" 40.50L
- 7’0" 21 1/8" 2 13/16 44.50L
- 7’2" 21 1/4" 2 7/8 46.50L
- 7’6" 21 3/4" 2 15/16" 51L
- 7’10" 22" 3" 56.50L
$995.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.” Geoff McCoy
Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,145.00 -
Torq Tec Multiplier - White
The Multiplier is a performance board designed to multiply your wave count. We blended the tail from our high performance Thruster model with a wider slightly lower rockered nose, while keeping the rail and foil low.
The resulting hybrid catches waves easily, but also gains speed much more quickly than a traditional narrow nosed shortboard and with a razor sharp responsive tail to use it.
Comfortable in waves from 2-6ft this is an all round shredder that will maximise your surf time.
5’8 x 19 7/8” x 2 1/4” 28.8 ltr 5’10 x 20 1/8” x 2 3/8” 31.2 ltr 6’0 x 20 3/8” x 2 1/2” 33.6 ltr 6’2 x 20 5/8” x 2 5/8” 36.3 ltr 6’4 x 20 7/8” x 2 3/4” 38.8 ltr 6’8 x 21 3/8” x 2 7/8” 43.7 lt 
$849.00 -
Torq Tec Rusty Dwart White
This board literally walks on water. Better yet, runs on water. We’re talking easy paddling, a fast ride, effortless glide, and lip blasting vertical capabilities, all packed into one board. The Dwart takes the basic elements of a modern fish and fuses them with a few high-performance design techniques to take it to the next level. You want a board that does it all? The Dwart is the best yet.
TEC 5’6 x 20.25” x 2.32” - 29.2 ltr 5’8 x 20.5” x 2.42” - 31.8 ltr 5’10 x 20.75” x 2.5” - 34.3 ltr 6’0 x 21” x 2.56” - 36.6 ltr 6’2 x 21.25” x 2.63” - 39.1 ltr 6’4 x 21.5” x 2.72” - 42.1 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,049.00
