Mick Fanning Twin Town - Cedar
Mick Fanning Twin Town - Cedar
The Mick Fanning Twin Town is a mid length twin, built utilising traditional softboard techniques.
Twin Town is light weight, super durable, extremely flexible and perfect for every level of surfer in a diverse range of surf conditions!
This board generates speed with minimal effort, paddles like a dream, catches any wave you look sideways at and cruises down the line with effortless flow.
Switch the softflex keels out for a retro hard keel fin set and experience one of the fastest high lines around.
- 2 Multi Fin boxes
- DECK: PO Layer, XPE Layer and then IXPE Layer
- BOTTOM: PO layer, XPE Layer, HDPE Layer
- Dual Bamboo stringer
Twin Town is built for good times and nothing else!
SIZING:
6’6" x 22" x 2 3/4" 44L
7’0" x 22" x 2 3/4" 48L
7’6" x 22" 5/8 x 2 7/8" 55L
8’0" x 22" 5/8 x 2 7/8" 59L
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
Mick Fanning Kuma Fish
The World Surf League (WSL) x MF Softboards Global Shaper Challenge was conceived to raise awareness of the creatives who are the heart and soul of the sport of surfing as part of the WSL's #StayLocal campaign, which shines a light on the world's best surfers supporting their local surf communities and inspiring surfers everywhere to do the same.
Shapers, designers and creatives from all surf regions globally were invited to enter a CNC file and softboard design concept and the response was overwhelming.
Four designs were selected through a public vote via the WSL Instagram story to progress to the final.
Designs from Alex Crews @acsod, Axel Lorentz @pukassurf @axellorentz, Mitsunori Kumagai @kumasurfboards and Gerardo Candelaria Perez @cevichesurfco were produced utilising MF Softboards production process which is the global bench mark for performance softboards.
Along with the four finalists Mick also selected two entries to move directly into the final. The wildcards are Duke Aipa @aipasurf and Kamalei Woolsey Alexander from @modernhawaiiancollective.
Starting with the CNC file that each designer submitted during round one of the competition we milled their design from an EPS blank. Once the EPS core was finish shaped our Hybrid Carbon Spine and Epoxy Shell construction was utilised to ensure maximum performance in the water.
All six boards were delivered to Mick for him to put them through their paces on the peeling righthand walls of his home break Snapper Rocks.
Mitsunori Kumagai
Gold Coast Australia
"Great Small Wave Catcher" The Flat deck makes increases the volume to help catch waves and provide more speed in poor conditions, A Slight forward placed concave bottom with a deep exit Vee that increases the tail rocker. This board is incredibly fast and finds hidden pockets of speed on waves. Enjoy..............."
Mitsunori Kumagai is KUMA surfboards shaper. He was born and grew up in Japan. In 2005 Kuma decided to move to Australia to pursue his passion of surfing and make surfboards. His first board was shaped in a garage at a rented house. Since then he has been shaping surfboards for 15 years.
His winning design was a 5'6 x 20 1/16 x 2 3/8 29.38L
Full sizes are:
5'4 (27.63L)
5'6 (29.52L)
5'8 (32.74L)
5'10 (36.15L)
6'0 (43.27L)$679.00 -
O&E Creative Army -The General - Epoxy/Soft Board - Mint
It's the leader of the pack and one of the most versatile longboards in the Creative Army Range. Creative Army is the love child of former World Longboard Champ Josh Constable. In collaboration with Ocean and Earth, this soft board constructed in Epoxy has a modern rocker making for precise turns, fast trimming and awesome tip time. Even if you're a long time nose rider or just learning and wanting some fun, this is the longboard for you.
Features
- Length: 9'6
- Width: 23 3/4"
- Thickness: 3 1/8"
- Volume: 92L
- Board Weight: 8.4kg
- Fins: 1 x Single fin 9" PU
- Fin Box: 10" Centre Box
Creative Army Epoxy features
TOP - DECK- Grippy EVA textured deck surface / 1 X E-Glass 6oz / 0.5mm wood veneer / 1 X E-Glass 6oz. Highly water resistant and extremely durable. Excellent grip and impact resistant.
MIDDLE - CORE/ STRINGERS
- EPS (Expanded Polystyrene) highly waterproof & lightweight. 2 x stringers (8'0" - 9'6") 1 x stringers (7'0" - 7'6") increases board strength and maintain rocker.
BOTTOM - SLICK
- 1mm thick HDPE high density polyethylene plate / 2 X E-Glass 6oz. Durable, extra strength performance slick.
INTERCHANGEABLE FIN BOX
- Centre Fin - 10" fin box compatible with single fin screw and plate design.
- Side Fins - (sizes from 7'0"- 8'0") compatible with single tab / Future fins. Allows quick and easy fin changing.
- Secures with fin key (included).
Sizing
7'0 x 22 1/4 x 2 1/2 (45L) 2+1 Fin System
7'6 x 22 1/2 x 2 1/2 (52L) 2+1 Fin System
8'0 x 22 3/4 x 2 3/4 (61L) 2+1 Fin System
8'6 x 23 x 3 (79L) Single Fin
9'0 x 23 1/2 x 3 (87L) Single Fin
9'6 x 23 3/4 x 3 1/8 (92L) Single Fin$819.00 - Length: 9'6
-
O&E Happy Hour Epoxy/Soft Board
The Happy Hour is all about fun with an edge! Suprising all round performance with the stiffness of an epoxy board plus the benefits of a durable soft textured deck. Narrower pin tail for performance. Wider nose area for easy paddling. Minimal rocker for easy paddling to catching waves.
Soft Board Features:
- DECK: Textured EVA
- EPS CORE - Highly waterproof & lightweight. 2X stringers increase board strength and maintain rocker.
- HDPE BOTTOM PLATE - 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick.
- INTERCHANGEABLE FIN BOX - Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key.
- PU TEXTURED DECK SKIN - Grippy textured deck surface. Highly water resistant and extremely durable. Excellent grip and impact resistant.
- 5 FIN SET UP - Ride as thruster or quad set up with your favourite single tab fins. 2X Soft tip PU fins and fin key included.
- FINS (SUPPLIED) : 1x 8" Polycarbonate centre fin
2x 4" Polycarbonate side fins - FINS BOX: Centre = 10" Box
Side Fins = Single Tab X4 (Compatible with Future Fins)
DIMENSIONS:
- 6'0" X 21" X 2 3/4" (37.6L)
- 6'6" X 21 5/8" X 2 7/8" (43.4L)
- 7'0" x 22" x 3 1/8" (52.4L)
- 7'6" X 22 1/4" x 3 1/4" (59L)
- 8'0 x 22 1/2 x 3 1/8 (62L)
$707.00 -
Softech Slayer 8'0"
NEW RELEASE
The perfect template for beginners looking for more control over their board. High in volume all the way through, this board is great for entry level surfers.
Volume: 7'0": 53.7L | 7'6": 60.6L | 8'0": 67.8L
You've had the lessons, learnt the basics and you've mastered the whitewash. Its now time to feel the true essence of surfing. That moment when you ride your first unbroken wave, trim across the face, and start guiding the board where you want it to go. With extra stiffness and buoyancy, this model is a great option for heavier riders wanting a higher volume, superior performing softboard.
Plenty of rocker in the nose to hook into a turn or keep you from pearling, this board was designed with all skill levels in mind.
- Epoxy core with single stringer
- Vacuum glassed with 6OZ. cloth
- High density PE foam deck
- Ultra-thin soft HDPE slick bottom
- Vee / Double Vee concave
Size: 7'0" / 7'6" / 8'0"
Dimensions: 7'0" x 22" x 3” / 7'6" x 22 ½" x 3 1⁄16” / 8'0" x 23" x 3 â ”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume:7'0": 53.7L | 7'6": 60.8L | 8'0": 67.8L+ Leash Plug installed
+ FCS II Softflex Fins included
$924.00 -
Softech The Triplet 5'8"
- A combo of fresh and old school. The perfect board for fast and steezy surfing.
- A combo of fresh and old school. Drawing off performance shortboard bottom contours and rails with some old-school rocker and outline. This is the perfect board for fast and steezy surfing.
- Plenty of volume under the chest to chip into some weak ones, but a drawn-in winged swallow tail to really hook into a turn. Run as a twin to really get zipping or throw a stabiliser in to get a little control.
- Vacuum glassed with 6OZ. cloth
- High density PE foam deck
- Ultra-thin soft HDPE slick bottom
Features: - Size: 5'8" / 6'0" / 6'3"
- Dimensions: 5'8" x 20 1/2” x 2 7/16”, 6'0" x 21 1/8” x 2 3/8”, 6'3" x 21 1/4” x 2 3/4”
- Core: Epoxy Core
- Stringer: Single Stringer
- Fin Setup: Tri (x3 FCS II Fin Setup)
- Fin System: FCS II
- Volume: 5'8": 29.5L | 6'0": 35L | 6'3": 38.25L
+ Leash Plug installed
+ FCS II Softflex Fins included
$659.00 - A combo of fresh and old school. The perfect board for fast and steezy surfing.
-
Mick Fanning Little Marley - White
Short, wide, fast and fun the Little Marley has a short rail line that fits perfectly into the smallest pocket. The small curvy outline helps in the weakest of beach breaks by decreasing drag and increasing speed which is the key to this little pocket rocket.
A single to double concave allowing full control at speed, the subtle diamond tail provides multiple pivot points for turning in the most critical sections of dumpy little shore breaks.This product comes with FCSII Performer Softflex Thruster Fins.
Sizing
Length 5’2 x 21 Width x 2 5/16 Thickness 29L VolumeLength 5’4 x 21 3/8 Width x 2 3/8 Thickness 32L VolumeLength 5’6 x 21 3/4 Width x 2 1/2 Thickness 35L VolumeLength 5’8 x 22 1/8 Width x 2 11/16 Thickness 39L VolumeLength 5’10 x 22 1/2 Width x 2 13/16 Thickness 43L Volume$779.00 -
Mick Fanning Beastie Epoxy-Lam - Sky
Beastie Epoxy Lam – The Ultimate Funboard for Progression & Versatility
The Beastie Epoxy Lam is engineered to be the next-level funboard, making every wave accessible and every ride smooth. Its clever volume distribution and generous outline create a super stable platform, perfect for building skills or as a playful longboard alternative.
Why Choose the Beastie Epoxy Lam?
- Ample, well-balanced volume for stability and effortless paddling, ensuring easy wave-catching and comfort in the lineup
- Wide outline provides a forgiving, confidence-boosting platform that’s great for progression or relaxed cruising
- Wide tail enhances lift and acceleration in weak waves, creating a substantial sweet spot for take-offs and stylish turns
- Durable Epoxy Lam construction delivers a lightweight, resilient board that performs session after session
- Adaptive FCSII/Futures fin system with thruster setup lets you fine-tune the ride for evolving styles and surf conditions
- Supplied with Thruster FCSII Softflex or Futures F8 Safety fins for versatile performance and safety
Sizing and Volumes
6’0” x 20” x 2 5/8” (37.01L)
6’6” x 22” x 2 3/4” (46.19L)
7’0” x 22” x 2 3/4” (50.05L)
7’6” x 22 5/8” x 2 7/8” (57.51L)
8’0” x 22 5/8” x 2 7/8” (61.52L)
8’6” x 24” x 3 1/2” (87.03L)
9’0” x 24” x 3 1/2” (91.92L)
Key Specs
- Construction: Epoxy Lam
- Rocker: Medium
- Bottom contours: Single to double
- Outline: Wide round tail
- Fin system: FCSII/Futures – Thruster
- Fins supplied: Thruster FCSII Softflex / Futures F8 Safety
Benefits
- Reliable platform for rapid progression and high wave count
- Wide tail adds lift and speed to weaker waves, keeping sessions fun even on smaller days
- Durable epoxy build handles the demands of regular surf and travel
- Adaptable for all levels—welcoming for learners, lively for advancing surfers
- Versatile sizing to suit groms, adults, and everyone in between
Who’s it For?
Surfers who want to progress quickly and catch more waves, without sacrificing stability or fun
Anyone looking for a funboard that doubles as a longboard alternative
Riders of all skill levels who value durability, comfort, and adaptability in their board
The Beastie Epoxy Lam is your everyday ticket to easier wave-catching, stable rides, and unstoppable surf enjoyment—no matter where your progression takes you.
$829.00 -
Ocean & Earth Ezi Rider Softboard 8'0
Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.
Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistantMIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).
THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.Features:
Length: 8'0
Width: 22 3/4"
Thickness: 3 3/4"
Volume: 80L
Board Weight: 5.87 Kgs
Fins: 3 x 4.5" Soft PU
Fin Box: Thruster - Interchangeable Dual Tab
Rider Weight: <110kg
$669.00 -
O&E The Bug - 5'6"
Looking for a soft board to start the groms on early? The Bug 5'2" Soft Board is the perfect introduction to waves; with a soft, durable deck and soft PU fins. This board has been designed for supreme stability to help the young ones learn and have a fun time!
TOP - DECK
Cross-linked IXL PE skin. Highly water resistant and extremely durable. Excellent grip and impact resistant.MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers - increase board strength and maintain rocker.BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate with mesh. Durable, extra strength performance slick.INTERCHANGEABLE BOLT THROUGH FIN BOX
Compatible with most major dual tab fin brands. Allows quick and easy fin changing. Secures with fin key (included).Features:
- Length: 5'6
- Width: 20 3/4"
- Thickness: 2 3/16"
- Volume: 39L
- Board Weight: 2.94kg
- Fins: 3 x 4.5" Soft PU
- Fin Box: Thruster - Interchangeable Dual Tab
- Rider Weight: <65kg
$390.00
