- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- Fcs2 Kolohe Andino Tri Fins - Black Blue
Fcs2 Kolohe Andino Tri Fins - Black Blue
Fcs2 Kolohe Andino Tri Fins - Black Blue
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Two Quad Rear fins.
Elongated fin for performing long arc turns.High degree of sweep angle provides exceptional control off the bottom and when carving on the open face. Designed for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions.
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
*Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Specs.
Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"2 / 7140mm2
Sweep: 33.2o
Foil: 50/50$89.00 -
Fcs2 Christenson Performance Glass Twin Fin
The Christenson Twin Fin set provides smooth and fast down the line speed.
From high performance twins to more traditional shapes, this is a perfect compliment to your twin fin. This set provides smooth and fast down the line speed.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$209.00 -
Fcs2 Carver Perfomance Glass Quad Side Small
Side byte set designed for 2+1 setups on longboards and SUP's.
- Two Quad Rear Side Byte fins designed to add speed, stability and control to any 2 + 1 set up.
- Neutral, well balanced template.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Suitable for longboards, SUP's or as shortboard quad rears.
$144.95 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
Fcs2 JS Modern Keel
The flow of a traditional twin fish with the control of a performance quad.
The JS Modern Keel is an upright keel template designed for the JS Red Baron and other specialty fish shapes. Featuring a wide base and a relatively small sweep (rake), this high area keel provides control through the face and pivot in a tight radius.
Overview
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & White in Performance Glass
Board Types
- JS Red Baron - The Red Baron, part of the Baron family, has a shorter and wider template with plenty of volume in the tail. It's tail width allows for speed generation through flatter sections as well as a deep double concave, this board was made with the JS Modern Keel template in mind.
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
X-LARGE (One size suits all)
$199.00 -
Fcs2 Kolohe Andino Tri Fins - Black Acid
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
$209.00 -
FCSII Mick Fanning Tri Fit Set - Black/Mango
Mick Fanning's signature FCS II MF fin in premium PC material for controlled powerful surfing.
Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.This fin provides maximum drive.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
GROM 4.04 102.6 4.20 106.6 12.73 8215 35.8 Flat/Bev MED 4.33 110 4.48 114 14.52 9369 36.0° Flat/Bev LRG 4.49 114 4.67 119 15.70 10131 36.0° Flat/Bev $209.95 -
FCS II Matt Biolos Tri-Quad Fin Set
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
- Tri/Quad (5 fin) set.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
$319.00 -
FCS II Mason Ho Signature Fin
Mason Ho's Signature fin. Welcome to Mason's world, and welcome to Mason's new fin.
Overview
Mase is calling this his new magic fin!
The new Mason Ho signature fin is a mashup of different templates. We took influences from Kelly Slater's original K-3 and Mick Fanning's signature templates, then reworked the flex, foil and tip profile based on extensive testing and feedback from Mason himself.
This might just be the fin to rule them all...Sitting in the Accelerator Family, this all-purpose, all-conditions fin will feel steady when driving into a turn, and fast and loose off the top. Explosive is another word to describe how this fin responds, and in this case, the personality of the M.Ho fin totally matches the creator and rider. Fast, Loose & Fun!
Mason's fin features a bevelled leading edge which allows for silky smooth transitions between turns. Performance Core + AirCore construction makes the fin a touch lighter, the flex a little stiffer and overall more reactive compared to standard PC construction, which is again suited to Mason's punk style of surfing.
This fin had a long development runway. Mason was after one fin he could use in his small wave rock-hopping fun boards right through to his big wave pipe guns, and it wasn't until he was totally satisfied that we pulled the trigger.
Welcome to Mason's world, welcome to Mason's new fin.
"The fins have been all time!!! Got some crazy waves at Ala Moana and got to push them hard as I could in the big bowl on some turns; full control off the bottom and nice and loose off the top. They went totally crazy in the pool as well, great projection on the air sections". Mason HoFeatures & Benefits
- Broad Spectrum Performance Fin
- 2-20 feet. Shortboards, step-ups, and guns
- Fast, loose, and steady
Ideal Conditions
Steady off the bottom, fast and loose off the top. Suited to a wide range of conditions, from small beachies to big bowling reef breaks. Ideal for surfers looking for a dependable, one-quiver fin.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.25 107.9 4.40 111.8 14.06 9074 34.9° Flat/Bev SML Ctr 4.25 107.9 4.40 111.8 14.06 9074 34.9° 50/50 MED Side 4.37 111 4.53 115 14.88 9602 34.9° Flat/Bev MED Ctr 4.37 111 4.53 115 14.88 9602 34.9° 50/50 LRG Side 4.49 114 4.65 118.1 15.70 10130 34.9° Flat/Bev LRG Ctr 4.49 114 4.65 118.1 15.70 10130 34.9° 50/50 $209.95 -
FCS II Mark Richards Twin + Stabiliser Fins - Black
Overview
Mark Richard's famous twin template produces exceptional drive and speed.
The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.Board Types
Designed to fit the FCS II Fin System.
Recommended for all board types including fish, funboard and twin fin boards.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Sizing:Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
Side 5.06 128.4 5.56 141.1 21.06 13590 32.1° Flat Centre 3.31 84.0 3.34 84.8 8.23 5307 29.1° 50/50 $224.00 -
FCS II Performer Tri Fins - Black
Overview:
Designed for a balance of speed, flow & response.
Well proportioned template with Inside Foil Technology (IFT).
Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.Ideal Conditions:
A wide range of conditions from beach breaks to point breaks.
Board Types:
Designed to fit the FCS II Fin System.
Recommended for all board types.Fin Family:
Performer: Find Balance. A balance of speed, flow & response.
Glass Flex:
Glass Flex (GF) fins are moulded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
Sizing:
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$99.00