- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- FCS2 Performer Quad Fins - Tranquil Blue
FCS2 Performer Quad Fins - Tranquil Blue
FCS2 Performer Quad Fins - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fins) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| SML Tri | 4.25 | 108 | 4.43 | 112 | 14.03 | 9054 | 33.7° | IFT |
| SML Q-Rear | 3.83 | 97 | 3.99 | 101 | 11.08 | 7150 | 32.4° | 80/20 |
| MED Tri | 4.37 | 111 | 4.55 | 115 | 14.81 | 9554 | 33.7° | IFT |
| MED Q-Rear | 4.09 | 104 | 4.26 | 108 | 12.63 | 8150 | 32.4° | 80/20 |
| LRG Tri | 4.48 | 113.7 | 4.67 | 118 | 15.58 | 10054 | 33.7° | IFT |
| LRG Q-Rear | 4.33 | 110 | 4.51 | 115 | 14.18 | 9150 | 32.4° | 80/20 |
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Two Quad Rear fins.
Elongated fin for performing long arc turns.High degree of sweep angle provides exceptional control off the bottom and when carving on the open face. Designed for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions.
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
*Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Specs.
Base: 3.86" / 98mm
Depth: 3.93" / 100mm
Area: 11.07"2 / 7140mm2
Sweep: 33.2o
Foil: 50/50$89.00 -
FCS2 Performer Performance Core Tri - Teal Black
Balance of speed, flow and response. Suitable for all conditions.Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$179.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
Fcs2 Power Twin + Stabiliser
High area twin fin set with stabiliser designed to be pushed hard through turns
Overview
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$229.00 -
FCS II Filipe Toledo Tri Fins
Filipe's new design for Summer 21/22 has dropped!
Filipe Toledo's 'FT' signature fin. Ultra-light material for fast progressive surfing.
Overview
- Constructed with ultra-light materials and combines the drawn out influences of a more raked fin with the all-round versatility of the Performer.
- Delivers exceptional drive and control off the bottom without hampering the speed off the top and release through the lip.
- Updated PC construction featuring ultralight AirCore.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
$229.00 -
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Medium Quad Rear 2 fin set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
SIZE :MEDIUM 65Kg - 80Kg
Neo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farmers, to improve their income, and to ensure better health and living conditions.
$99.95 -
Fcs2 RM Camo Quad
Overview
- The Seaside Quad is Rob Machado’s first signature FCS II fin template.
- Designed specifically for his Firewire Seaside model.
- This semi-keel + stabiliser offers the flow of a traditional twin fish with the control of a performance quad setup.
- Quad set containing 4 fins.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks, Ideally suited to smaller, weaker waves.
Board Types
- Designed to fit the FCS II Fin System.
- Excels in higher volume hybrid surfboard models.
$259.00 -
FCS2 Sharp Eye Matt Biolos PC Tri Fins
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
Fcs2 Reactor PC Tri Fins - Charcoal/Black
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II Mason Ho Signature Fin
Mason Ho's Signature fin. Welcome to Mason's world, and welcome to Mason's new fin.
Overview
Mase is calling this his new magic fin!
The new Mason Ho signature fin is a mashup of different templates. We took influences from Kelly Slater's original K-3 and Mick Fanning's signature templates, then reworked the flex, foil and tip profile based on extensive testing and feedback from Mason himself.
This might just be the fin to rule them all...Sitting in the Accelerator Family, this all-purpose, all-conditions fin will feel steady when driving into a turn, and fast and loose off the top. Explosive is another word to describe how this fin responds, and in this case, the personality of the M.Ho fin totally matches the creator and rider. Fast, Loose & Fun!
Mason's fin features a bevelled leading edge which allows for silky smooth transitions between turns. Performance Core + AirCore construction makes the fin a touch lighter, the flex a little stiffer and overall more reactive compared to standard PC construction, which is again suited to Mason's punk style of surfing.
This fin had a long development runway. Mason was after one fin he could use in his small wave rock-hopping fun boards right through to his big wave pipe guns, and it wasn't until he was totally satisfied that we pulled the trigger.
Welcome to Mason's world, welcome to Mason's new fin.
"The fins have been all time!!! Got some crazy waves at Ala Moana and got to push them hard as I could in the big bowl on some turns; full control off the bottom and nice and loose off the top. They went totally crazy in the pool as well, great projection on the air sections". Mason HoFeatures & Benefits
- Broad Spectrum Performance Fin
- 2-20 feet. Shortboards, step-ups, and guns
- Fast, loose, and steady
Ideal Conditions
Steady off the bottom, fast and loose off the top. Suited to a wide range of conditions, from small beachies to big bowling reef breaks. Ideal for surfers looking for a dependable, one-quiver fin.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
SML Side 4.25 107.9 4.40 111.8 14.06 9074 34.9° Flat/Bev SML Ctr 4.25 107.9 4.40 111.8 14.06 9074 34.9° 50/50 MED Side 4.37 111 4.53 115 14.88 9602 34.9° Flat/Bev MED Ctr 4.37 111 4.53 115 14.88 9602 34.9° 50/50 LRG Side 4.49 114 4.65 118.1 15.70 10130 34.9° Flat/Bev LRG Ctr 4.49 114 4.65 118.1 15.70 10130 34.9° 50/50 $209.95 -
FCS II Power Twin + 1 Fin Set - Black
Overview:
- Highest area twin set in the FCS range; as a result, can be pushed harder through turns.
- Moderate sweep (rake), full tip and longer base delivers incredible drive and speed.
- Lower depth value maintains manoeuvrability and looseness off the top and through turns.
- Designed in collaboration with Harley Ingleby for use on his asymmetric twin model.
- Twin fin + stabiliser
- Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Board Types:
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
Side 5.26 133.6 5.35 135.8 21.44 13835 32.7° Flat +1 3.30 83.7 3.45 87.6 8.71 5620 33.6 50/50 $239.00 - Highest area twin set in the FCS range; as a result, can be pushed harder through turns.