FCS II Performer Single Fin
FCS II Performer Single Fin
The Performer Single fin features the FCS II toolless Long board fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set up.
Overview
The Performer Single fin features the FCS II toolless LB fin base on a standard Performer thruster fin. This fin allows the user to convert any board with a fin box into a thruster set-up.
Available in M, L and XL thruster sizes, the Performer template is regarded as a versatile, all-round fin for all conditions. It can be paired with Performer side fins, or any other side fins to convert a 2 + 1 into a thruster, essentially making the board looser and more responsive.
The tooless fin base also allows the fin to be easily moved forward and back in the box to the desired position for optimum performance. This customisable feature can be utilised while the surfer is in the water. No other system can offer this feature!
- Thruster Fin with toolless FCS II Single Base
- Converts single box to thruster set-up
- Performer M, L, and XL sizes
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
| Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
| MED | 4.37 | 111.0 | 4.55 | 115 | 14.81 | 9554 | 33.7 | TBC |
| LRG | 4.48 | 114.0 | 4.67 | 118 | 15.58 | 10054 | 33.7 | TBC |
| XL | 4.59 | 117.0 | 4.78 | 121 | 16.36 | 10554 | 33.7 | TBC |
You may also like ...
-
Versatile, high performance LB fin for all conditions. Seamlessly connect turns and move up and down the board.
Features.
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
TURN & CONNECT (Seamlessly connect turns and move up and down the board).
2 + 1 Compatible.
Suits most LB’s with hard edges.
Designed to be used in existing FCS Longboard boxes. No new box required.Fin Material.
Performance glass.Specs.
CONNECT 6"
Base: 4.27" / 108mm
Depth: 6.00" / 152mm
Area: 17.65" / 11390mm²
Sweep: 33.7º
Foil: 50/50CONNECT 7"
Base: 4.99" / 126mm
Depth: 7.01" / 178mm
Area: 24.05" / 15518mm²
Sweep: 33.7º
Foil: 50/50CONNECT 8"
Base: 5.64" / 143mm
Depth: 7.96" / 202mm
Area: 30.71" / 19812mm²
Sweep: 33.7º
Foil: 50/50CONNECT 9"
Base: 6.43" / 163mm
Depth: 9.03" / 229mm
Area: 39.91" / 25748mm²
Sweep: 33.7º
Foil: 50/50CONNECT 10"
Base: 7.13" / 181mm
Depth: 10.01" / 254mm
Area: 49.06" / 31653mm²
Sweep: 33.7º
Foil: 50/50$179.00 -
Versatile, high performance fin. Connect turns and move up and down the board. Plate & screw fastening.
Overview
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
2 + 1 Compatible.
- Plate & screw fastening.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$154.95 -
FCS II Christenson Longboard Fin - Black
NEW SEASON COLOUR 23/24
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Overview
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.00 -
FCS II HATCHET PG LONGBOARD FIN
High fin area makes for exceptional hold. Designed for nose riding and heavy footed turns.
Overview
High area and depth makes for exceptional hold.
Designed for nose riding and heavy footed pivot turns.
Ideal for heavy logs and specialist nose riders.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$189.95 -
FCSII Pivot Performance Glass Fin - Charcoal Grey
Overview
- Pivot in the pocket, lock the rail on the wave face and run the nose.
- Upright fin with minimal sweep and base.
- Loose fin for performing tighter turns.
- Bigger sizes ideal for logs and nose riding (9" + 10").
- 2 + 1 Compatible.
- Designed to be used in most existing FCS Longboard boxes. No new box required.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$209.95 -
Fcs Connect GF Screw & Plate Longboard Fin
Versatile, high performance longboard fin. Connect turns and move up and down the board. Plate & screw fastening.
Overview
Neutral, well balanced template.
Versatile, high performance Longboard (LB) fin for all conditions.
Offers a combination of drive, speed and response for modern longboarding.
Turn and Connect: Seamlessly connect turns and move up and down the board.
2 + 1 Compatible.
- Plate & screw fastening.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
$89.95 -
The Tiller 9” is a modern spin on a classic favorite. Made with Volan fiberglass, this fin offers a unique flex pattern due to higher fiberglass to resin ratio. With a large base for holding your line and a thinned tip for added responsiveness from rail to rail, the Tiller is a great template for your favorite mid-length, egg, log or 2+1. This timeless flex fin is offered in 8”, 9” & 10” to really customize your ride.
- Template Category | Flex Template
- Construction | Volan Fiberglass
- Size | Large Longboard
Center Fin Area 32.90 Height 9.00 Base 7.10 Foil SYMM $179.00 - Template Category | Flex Template
-
FCS II Thomas Longboard Fin - Flame
NEW SEASON COLOUR 23/24
Thomas Bexon's new signature single fin holds the perfect amount of release and drive.
Overview
Inspired by the height of Australian old mals in the mid 60's, this fin incorporates the perfect amount of release and drive for turns along with plenty of hold for nose rides.
"I have tried a lot of fins and this is the best combination of every element in one fin. A touch of flex in the tip but not too much so it doesn't get the doughy feeling that flexible fins can give at times." - Thomas Bexon.
Performance Glass
Performance Glass (PG) fins are machine-cut from layers of solid fiberglass. These fins are stiff and are widely used by pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid-surf.
- Easily insert or remove your fin in seconds. No fin key is required.
- Designed to be used in most existing Longboard boxes. No new box is required.
$199.95 -
FCS II Christenson Longboard Fin - Blood Red
NEW SEASON COLOUR 23/24
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Overview
The 7.5" to 8.5" Christenson will work amazing in your favourite mid length board. Or step it up to the 9" to 9.5" for your everyday log.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
The FCS II Tool-Less Longboard System
- No need for a plate and screw.
- Ability to adjust your fin position in the box mid surf.
- Easily insert or remove your fin in seconds. No fin key required.
- Designed to be used in most existing Longboard boxes. No new box required.
$199.00 -
-
FCS Clique Screw & Plate Longboard Fin
An upright fin with a short base. Very manoeuvrable yet forgiving when linking turns. Works well with a 2+1 set-up.
Overview
Versatile, well-balanced template. A shorter base makes it highly manoeuvrable. Slim, tapered tip provides a high level of forgiveness and turning freedom. Suited to traditional and performance longboards.
Slim, tapered LB template
Highly manoeuvrable and forgiving
- Plate & screw fastening.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fibreglass. These fins are stiff and are widely used by pro-level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
7" 4.74 120.3 7.01 177.8 21.95 14162 34.5° 50/50 8" 5.42 137.5 8.01 203.2 28.67 18497 34.5° 50/50 9" 6.10 154.7 9.01 228.6 36.29 23410 34.5 50/50 $149.95
