O'Neill Youth Heat RT Boot W/Zip 3MM - Black
The Flashbomb boot features the Rip Curl exclusive .8mm single layer sole that provides the ultimate board feel without compromising durability. This boot has all of the high end features you need.
Protective, lightweight reefwalkers great for use in all wet domains. Featuring mesh water flow panels these quick drying shoes are great for beach / reef walking. *Mens footwear sizing.
The liquid dipped Rip Curl Rubber Soul offers the ultimate in performance and water tight seal. This boot is a minimalist's dream. Lightweight, warm, water tight, and durable.
Features
Ultimate surf reef boot with split toe. Also the favourite bootie for dinghy sailors and windsurfers.
Features.
Split Toe.
Heel Cinch.
Better than Barefoot
Our Custom Pro Series has no equal in the world of aquatic footwear. Every material and design detail has been painstakingly researched, tested, refined, and perfected to yield a boot so good you'll forget you are wearing it.
The Custom Pro is anchored by our patented Full Wrap arch strap, which locks your foot into the boot to insure zero delay between foot movement and board response. Combined with the precision fit of our custom heat-molding process, the Custom Pro provides barefoot feel and response for every possible foot shape: high or low arch, narrow or wide width, high or low volume.
Updates to the 2020 Custom Pro include:
Recommended Water Temps: 40-50F.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Key Features:
Continuous innovation brings an unparalleled level of heat to the Furnace Wetsuit Boot. The warmest wetsuit accessories in the world, our top shelf wetsuit bootie is backed by Furnace Graphene. Innovative graphene-wrapped yarns combine with carbon fibers for a wetsuit that is lighter, stronger and warmer for longer. The pinnacle of wetsuit technology, Furnace Graphene is 50% lighter than traditional hollow fiber liners and the most heat-conductive material on the planet. Graphene lining and a thin yet durable sole design combine for a lightweight, ultra warm boot that offers a close board feel. A newly slimmed-down fit and ultra thin sole offer up incredible dexterity and a barefoot feel.
Features:
Men’s wetsuit boot.
We've changed the bootie-game again with our Solite 2.0 technology. The 3mm Custom integrates our 2.0 Sole in the cleanest, simplest package that essentially disappears on your feet. If you want the world's lightest, barely-there boot, the 3mm Custom 2.0 is your answer. Check the tech:
3D-Molded Natural Rubber Sole
Like all of our new 2.0 Series boots, the 3mm Custom 2.0 features a 3D-molded 1mm natural rubber sole, wrapping up the toes and heel for increased durability and protection against rocks, urchins, and reef. The one-piece sole design leaves no exposed gaps between sole pods, insuring extra protection and durability.
Custom-Fit 2.0 Thermofoam Sole
Our patented heat-moldable 2.0 Thermofoam Sole has also been completely redesigned including a more comfortable Mini-Split internal split toe. The Mini-Split is 1cm shorter than our prior internal split, improving fit and comfort for a wider variety of toe shapes while still maintaining precise control. The Thermo Foam Sole is 4mm thick in the toes/heels for extra protection and 3mm elsewhere.
Upgraded Neoprene Lining with Tatex Flex-Spine and Plush Interior
Updates to the Custom 2.0 aren't limited to the sole. We've also upgraded the outer lining material to the same one we use on the Custom Pros, improving durability and minimizing water absorption. Further fortifying the exterior is our exclusive Tatex Flex Spine. The Flex Spine stiffens the back of the boot to act as a shoe-horn and also provides a sticky surface to grab your wetsuit leg and prevent flushing. The inside is lined with a plush quick-dry lining material for max airflow, improving warmth and comfort.
EZ-O Cuff with Overkill Seams
Our EZ-O cuff design provides a seamless barrier against flushing with a larger panel than other o-ring seals, providing much easier on-off and reducing stress on the seams. To reduce bulk under the wetsuit leg and allow for easier on-off, the EZ-O panel is reduced to 2mm thickness. Since booties take serious abuse, we cut no corners on our neoprene seam construction. Our Overkill neoprene seams are triple-glued, blind-stitched, then sealed on the exterior with Liquid Seam Seal for maximum durability and longevity.
Reinforced Stealth-Loop
To ease on/off, we've integrated our low-profile Stealth-Loop in the heel. The Stealth Loop is laminated between the neoprene and our co-molded rubber/textile heel reinforcement patch, providing incredible durability and pull-strength. The Stealth Loop is also Tatex-coated for extra strength and zero-water absorption.
Split-Toe Heat-Booster Socks in the Box
The unsung hero of our Solite "System", our Knit Split-Toe Heat-Booster Socks are included in the box. Knit from a Nylon/Poly/Spandex blend, the Heat-Boosters stay warm and comfortable when wet. Benefits of the Heat Boosters are numerous:
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. If you are a size 10, also order a size 10. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Everything You've Always Wanted in a Boot...and Less.
It's simple. Solite's 2020 3mm Custom is the lightest, most high-performance piece of aquatic footwear in the world. Solite's most affordable Custom Series crushes competitor's top-of-the-line boots with instant response, barefoot feel, unmatched durability, and a perfect custom fit that makes you forget you are wearing booties.
Solite's ongoing obsession with improving their products led to a completely redesigned neoprene upper on the Custom series, featuring our exclusive "EZ-O" cuff. The EZ-O cuff is a seamless O-ring against the leg, a design proven to greatly reduce water entry. Unlike other O-Ring designs, the EZ-O features a much larger neoprene panel, allowing more stretch in the opening and making the boots easier to put on and take off.
Sizing Tip: Order your regular shoe size or 1/2 size down. For example, if you are a size 10.5, order a 10. Women should order 1-1.5 sizes lower to convert from Men's sizing. So if you are a Women's 8, order a Men's 7. If you are a Women's 8.5, also order a Men's 7. NOTE: If your feet are exceptionally narrow or low volume, you may want to size down even more.
Recommended Water Temps: 50-60F.
Key Features/Benefits
When you need the best performance boot possilbe. The Hyperfreak dipped boots are the favourites of the O'Neill staff and team. The dipped technology form fits to your feet to reduce the amount of water in your boot while surfing. Designed with a stretch entry to help you get them on and off.
