- Home /
- SURF & SUP /
- Surboards by Type /
- Shortboards /
- Tuflite JC Peter Mel 6'4
Tuflite JC Peter Mel 6'4
6'4" JC Peter Mel Machine - Built for Peter Mel, with a wider nose and tail and medium entry rocker, this board is a high performance shortboard for a bigger surfer. Great for the bigger surfers that want to rip or the rest of us that just want to catch waves a bit easier, SO WE CAN RIP!
LENGTH: 6'4" 193.04 cm
NOSE: 11.9" 30.23 cm
MID: 19.35" 49.15 cm
TAIL: 14.5" 36.83 cm
THICK: 2.35" 5.97 cm
VOLUME: 30cc
FINS: FCS
This item is considered bulky. Please Click Here to view more info on bulky goods.
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
This is a true one board quiver. Up front you have a ‘fish’ like nose – wide through the 12” mark with an easy entry rocker and single concave. From the mid point back, the template narrows in a long curve into a rounded pin tail with a little more rocker under the back foot and a double concave to vee behind the fins.
This combination makes a board that paddles well and catches waves like a fish but also performs in more critical waves. Under your front foot the board is fast and accelerates quickly, with speed to burn. As you transfer your weight to your back foot the combination of the round pin and double concave makes the board sharp and responsive, easily capable of holding a high line in the barrel or deep gouging carves.
With 5 Futures fin boxes, the Hybrid can be ridden as Quad or Thruster.
Dimensions Volume 5’8 x 20” x 2 3/8” 30.6 l 6’0 x 20 1/2” x 2 5/8” 35.7 l 6’4 x 21” x 2 3/4” 40.2 l 6’8 x 21 1/2” x 2 7/8” 44.9 l $829.00 -
A sled for any waves up to 4ft. Whether you are a Longboarder looking for a step down or a shortboarder looking for some extra volume for the smallest days, this board will make you stoked for even the weakest surf.
The shape is short and wide providing loads of planing area and with around 30% more volume than the Thruster, loads of float too. The rocker is flat for maximum speed and the foil carries out to the rail so you can power through turns without bogging the rail.
With 5 Futures fin boxes, the Summer 5 can be ridden as Quad or Thruster.
Dimensions Volume 5’6 x 21” x 2 3/8” 32.3 l 5’8 x 21 1/2” x 2 1/2” 35.2 l 5’10 x 22” x 2 5/8” 38.3 l 6’0 x 22 1/2” x 2 3/4” 41.8 l 6’2 x 23” x 2 7/8” 45.4 l $819.00 -
This design is the first Nugget, Geoff McCoy shaped in 1994. Proven to be a very versatile performer in a wide range of wave conditions from 1ft to 8ft all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.”
Geoff McCoyFlax fibre cloth is an engineered reinforcement fabric made from the bast of the flax seed plant. While flax fibre is one of the oldest cultivated fibres for textiles, it is only recently that its use as a fibreglass substitute has been acheived. Incorporating flax fibre cloth in the lamination reduces the use of regular glass by 1/3rd and adds a great earthy look and more importantly helps lower our carbon footprint.
SR GreenPoxy 56 is an epoxy resin which has up to 56% of its molecular structure coming from plant origin. This percentage is function of the carbon origin contained in the epoxy molecule. The final rate of the mix bio-based carbon content will depend on the hardener choice.
The manufacture of EPS foam does not involve the use of toxic isocyantes used in the production of regular surfboard blanks. Expanded Polystyrene (EPS) foam is light weight and has fantastic shock absorbing properties, making it ideal for surfboards. EPS foam has more buoyancy and flotation increasing paddling speed and maneuverability.
The Surfboard Agency has teamed up with the first, independent 3rd party consumer-facing “eco-label” for boards, the ECOBOARD Project is focused on reducing carbon footprints, increasing the use (and reuse) of renewable, recycled and up-cycled inputs, and reducing toxicity within the surfboard manufacturing process.
*No Fins Included - Recommended Fin: FCS II Accelerator
$1,195.00 -
Torq TET Mod Fish 6'3"
With a shape that’s more today than yesterday, Torq's modern “fish” design is built for speed. Excelling in chest to overhead high waves, it performs on those hollow, glassy days, yet enjoys mushy, sloppy and less than perfect conditions too. Comprised of a full nose and wide mid, with clean balanced curves that blend into a swallow tail. The bottom contours through single to double concave with a lightly flipped nose. Tune to your taste with Tri-Quad option.
Board Features
- Length: 6'3"
- Width: 20 1/2"
- Thickness: 2 1/2"
- Volume: 36 l
- Construction: EPS/ Epoxy
- Conditions: 1 to 4ft
- Fins: 3 x Futures Fin Boxes (Fins Included)
Level 2 > Expert Wave Height 2 - 6ft+ Dimensions 6’3” x 20 1/2” x 2 1/2” Recommended Rider Weight 45-75 kg / 100-165 lbs Volume 36.0 ltr $769.00 -
ELEMNT Mid Length - Sky
An easy to ride mid sized all rounder, classic concept with a modernised design. low rocker and a combination of single & double concave plus vee, medium rails with forward volume, Paddles extremely well with lots of drive, and pivot can be easily adjusted with the 1 + 2 fin set up, single fin box plus side bites.
Construction: EPS/epoxy
Fin System: FCSII / Future sides plus Single fin box
Rocker: low
Bottom Contours: rolled vee to single/double concave with vee out the tail
Tail Shape: round tail.
Does not come with fins.
- 6’8" 21" 2 3/4" 40.50L
- 7’0" 21 1/8" 2 13/16 44.50L
- 7’2" 21 1/4" 2 7/8 46.50L
- 7’6" 21 3/4" 2 15/16" 51L
- 7’10" 22" 3" 56.50L
$995.00 -
ELEMNT Wild Cat - Dune
Elemnt's Wild Cat Dune has a wider outline plan shape with pulled in round tail, flat bottom rocker combined with a little nose and tail kick.
Lots of volume throughout concentrated from centre point forward under chest area. Fuller rails with single concave bottom running from nose into double concave through fin area and out tail.
Multi fin allows you to run between classic single fin, 2+1 single plus sides, quad fin or twin fin setup.
Construction: EPS/epoxy
Fin System: Multi Fin FCSII /Futures + single fin box
Rocker: medium nose entry, low off the tail
Bottom Contours: subtle single to double concave
Tail Shape: Pulled in round tail.
Does not come with fins.
Dimensions:
- 6’4 21" 2 11/16" 40.02L
- 6’6 21 1/2" 2 3/4 " 43.12L
- 6’8 21 3/4" 2 13/16" 45.62L
- 7’0 22 1/8" 2 7/8" 50.54L
- 7’2 22 1/2" 3" 54.84L
$995.00 -
Torq Tec Rusty Dwart White
This board literally walks on water. Better yet, runs on water. We’re talking easy paddling, a fast ride, effortless glide, and lip blasting vertical capabilities, all packed into one board. The Dwart takes the basic elements of a modern fish and fuses them with a few high-performance design techniques to take it to the next level. You want a board that does it all? The Dwart is the best yet.
TEC 5’6 x 20.25” x 2.32” - 29.2 ltr 5’8 x 20.5” x 2.42” - 31.8 ltr 5’10 x 20.75” x 2.5” - 34.3 ltr 6’0 x 21” x 2.56” - 36.6 ltr 6’2 x 21.25” x 2.63” - 39.1 ltr 6’4 x 21.5” x 2.72” - 42.1 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,049.00 -
Channel Islands MINI DC is a collaboration with Kalani Robb and MINI automotive.
Combining passion for performance and fun, you get a versatile surfboard for a wide range of conditions.
Ultra-relaxed rocker, wide nose, wide squash tail, thin rails, and aggressive single to double concave with vee out the tail.
All the speed and wave catching ability of a traditional fish, but with the performance benefits of a squash tail.
Working best in knee to head high surf and is best as your go to groveler.
Construction: Fusion Dual-Core utilizes the lightest and strongest EPS core on the market. Lively and buoyant centre, while the PU foam inserts on the rails combined with the pop-flex stingers give you a natural feel and response
Specs.
Length 5'5" Width 19.8" Thickness 2.4" Volume 29.7L
Length 5'7" Width 20.0" Thickness 2.4" Volume 31.8L
Length 5'9" Width 20.3" Thickness 2.5" Volume 34.1L
Length 5'11" Width 20.5" Thickness 2.7" Volume 38.8L
Length 6'1'" Width 21.0" Thickness 2.9" Volume 42.9L
$1,145.00