Surf Co Quick Fix Putty
Description
The Quick Fix Putty is designed for repairing epoxy and polyester boards. Recommended for SurfTech, BIC, NSP, and solid colored SUP boards.
The kit include:
- Putty
- Gloves
- Wet/dry sandpaper
- Wooden applicator
- Instructions, sticker and product insert
You may also like ...
-
Ding All Fibreglass Cloth - 2.7m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
- 2.7m x 68 cm
$39.00 -
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
$45.00 -
The Cannonball removes old wax and dirt build up from your surfboard without chemicals, and comes with a free Wax Comb and Sticker.
Is the Cannon Ball Wax Remover as good as the Pickle and what does it come with?
Yes, Phix Doctor’s Cannon Ball Wax Remover is actually about 10% bigger than the Pickle so it can Blast about 10% more wax and dirt off of your board! The Cannon Ball comes with a FREE Wax Comb and Logo Sticker.What is the Cannon Ball Wax Remover made of and does it work well?
The Cannon Ball Wax Remover is filled with processed material that has been discarded after shaping a surfboard. Phix Doctor processes this waste material into a super effective wax and dirt blasting Cannon Ball.$25.00 -
Phix Doctor UV Curing Light
Phix Doctor was the first to offer UV Curing lights for the DIY ding repair market, and now we’ve stepped up the power with our new 9 LED UV Curing Light! Packaged in an earth friendly biodegradable outer box this small but powerful torch can cure uv resin in as little as 1 minute in areas of approximately 2 inches (5 cm) radius. Don’t be fooled by overpriced gimmicky curing lights, this low priced game changing tool puts the power of the sun in your hands to do repairs anytime in no time!
$40.00 -
NO SUN/UV CURE, USES CATALYST (Included)
Phix Doctor use ultra fresh Silmar brand Polyester resin and the highest quality products.
Will this repair kit work for my epoxy board?
No, polyester resin is not compatible with styrofoam core boards. We advise to never allow this resin to be in contact with styrofoam (EPS) cores.$40.00 -
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
$35.00 -
Solarez Epoxy Pro Travel Kit
- Zerovoc ® Styrofoam-safe UV cure resin
- 2-part epoxy resin for internal structural repairs
- Solarez Microlite-Epoxy for foam repairs
- Fiberglass cloth
- Rope
- Stainless Steel Scissors
- Sandpaper
- Eco-Friendly Clean Up Solvent
- Applicators
All in a crush-proof travel box.
$120.00 -
Sponge Rez Body Board Repair 15ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges.
Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores.
Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberately inhale vapours – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$16.00 -
Sponge Rez Body Board Repair 60ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$39.00 -
Solarez Epoxy Ding Repair Kit 30 Ml
Wh
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
$34.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00 -
