O&e Paddle Blade Guard
Description
Need to protect your SUP paddle from getting smashed on your SUP Board? The Ocean and Earth SUP Paddle Blade Guard is the perfect solution. Coming in a 1.2 metre length, this tape uses extra strong adhesive. Protect both your paddle and SUP board with this SUP Paddle Blade Guard.
Features
1.2 metre rubber guard
Protects paddle and board
Comes with extra strong adhesive
Fits: One Paddle,
You may also like ...
-
FCS Camlock Tie Downs - 4m
Simple and strong, the FCS Cam Lock tie-down system will efficiently strap your boards down with one pull.
Features:
- Holds 1-2 surfboards
- Perfect for securing boards to the roof of most vehicles, with or without roof-racks
- 2 straps made from 25mm nylon webbing
- Metal cam lock system encased in a neoprene sleeve for protection
- Straps are each 4 metres long
- Comes packaged in convenient zip storage pouch
- Contains 2 straps
$49.95 -
Loksak Waterproof Case
Great for: phones, keys, cash, credit cards and small kits.
aLOKSAK bags are resealable element-proof storage bags featuring a hermetic seal. That means absolutely no water, air, dust or humidity permeates the closure. They are designed for a wide range of applications and environments. The transparent bags are flexible and puncture resistant. They come in multiple sizes and can be sealed over and over again. The unique and patented materials, closure systems and manufacturing techniques used to fabricate the aLOKSAK surpass even the most rigorous testing standards.
Features:
- Inner Dimensions 9.84 cm x 17.18 cm
- Comes with a lanyard
- Certified waterproof to 60 metres by SCUBA Schools International
- 100% protection from water, sand, humidity, and snow
- All touch screen electronics work 100% while protected in the aLOKSAK
- Make and receive phone calls while phone is protected in the aLOKSAK
- Made in the USA
$34.00 - Inner Dimensions 9.84 cm x 17.18 cm
-
Stand Up Paddle Lightweight Board Cover
FITS : 1 Board
FABRIC : UV Reflective Tarpee
PADDING : 5mm Waterproof
FEATURES :
• Protective nose piece both sides
• Side Gusset
• Shoulder Strap
• Non corrosive nylon zips
• Fin slot
• Removable storage hook$219.00 -
Stand Up Paddle Lightweight Board Cover
FITS : 1 Board
FABRIC : UV Reflective Tarpee
PADDING : 5mm Waterproof
FEATURES :
• Protective nose piece both sides
• Side Gusset
• Shoulder Strap
• Non corrosive nylon zips
• Fin slot
• Removable storage hook$219.00 -
Features
4 metres length 60mm width 0.5 thick,
Enough for 2m on each side of your board,
Transparent,
Extra strong adhesive.$69.00 -
SUP Wall Rack Quad Aluminium NZ by Curve
Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)
Precision engineered made from rust-proof aluminium, this pair of Curve quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty aluminium tubing that is both super strong and super resistant to rust.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely unnecessary!
Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 15kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage space.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake.
Capacity Easily supports 4 standup paddle boards up to 15kg each with fins left on (plenty of space between levels)Got less than 4 boards? Check out our triple and double SUP rack options...
Features
- super strong & durable aluminium construction
- super resistant to rust
- sleek sliver finish
- protective EVA foam padding for board protection
- easy installation - arms insert with a simple push pin
- set includes pair of two racks plus installation screws
- stores 4 Stand Up Paddle Boards
- arm length 68cm , base height TBAcm ["], space between arms 30cm
- Curve 12 month guarantee
$199.00 -
Curve Rack Naked Single Sup
The Minimalist 'Naked' SUP Rack is the ultimate rack for your Stand Up Paddle Board. It is both functional and aesthetically pleasing, with a minimalist approach, disappearing into the background and letting your SUP take the spotlight. Display and show off your SUP, not the rack! If you're looking for a lightweight, affordable, and non-intrusive way to show off your favourite paddleboard, then the Minimalist SUP Rack is an excellent option.
The Minimalist SUP rack arms are made from a single piece of aluminum that have been custom cut and bent. Each rack arm has two pre-drilled holes that allow you to mount two screws in a single stud. The combination of all-aluminum construction with the 2-screw mounting pattern makes the Minimalist SUP rack incredibly sturdy for its size and appropriate for a majority of SUPs on the market. The rack arms have been "pre-bent" slightly above horizontal so when a heavy SUP is loaded the arms do not sink below parallel with the floor, a very secure design. Lining the inside of each rack arm is a thick piece of felt padding. This provides a soft place to rest your paddleboard and prevents any long term pressure point distortions.
The Minimalist SUP rack is offered in a sleek matte black powder coat finish that looks great and is very heavy duty. Even though the rack is mostly hidden when displaying your paddleboard, we have still gone the extra mile to ensure that what little does looks awesome.
Features
- Minimalist design shows off SUP and not rack
- 100% aluminum - sturdy and never rusts!
- Soft felt padded interior to protect your SUP's rails
- Space to store your paddle
- Easy installation - mounting screws included
- Supports boards up to 50lb [22.5kg]
Recommended Paddleboard Sizing
SUPs come in many shapes and sizes so it is a challenge to have one rack that fits every SUP. Here are ideas of the sizes that the Minimalist SUP Rack can hold:
- Weight: Boards up to 50lbs [22.5kg]
- Width: Boards up to 36 inches wide
- Thickness: Boards up to 6 inches thick
- Length: Any (the rack arms are independent and can be mounted as far or as close together as needed to accommodate your SUP)
The Minimalist SUP works well with most inflatable SUPs. We know it can be a hassle to constantly inflate and deflate them.
The Minimalist SUP is NOT meant for touring boards, they have too wide of a hull and the geometry to lean the board back against the wall does not work.
The Minimalist SUP rack was a long time in development due to the size and weight of paddleboards. It is one thing to make a rack to hold a skateboard or short surfboard on the wall........but it is something entirely different to securely hold a 50lb SUP that is 12ft long! So a new strengthening rib was added to provide extra rigidity and strength.... while keeping the rack as low profile as possible.$50.00 -
Yeti Panga Submersible Backpack 28l
The Yeti Panga Backpack is an airtight citadel merging the durability of the Panga Duffel with a tried-and-true backpack design. Its ergonomic DryHaul Shoulder Straps offer extra carrying comfort, while the removable chest straps and waist belt provide added stability and security while you trek. And no need to carry it over your head while you wade or blink an eye if left out in the rain, because it's a 100% waterproof gear fortress equipped to outperform any other backpack out there.
28 litres
HYDROLOK™ ZIPPER
Makes sure water stays out so your gear stays bone-dry, no matter how torrential it gets.U-DOCK™
The terminal end of your HydroLok Zipper that ensures a completely airtight seal.THICKSKIN™ SHELL
Yeti's ThickSkin Shell is made of high-density nylon and thick TPU lamination to be puncture and abrasion resistant.
METALLOCK™ HARDWARE
Tough-as-nails, simple-as-rocks.QUICKGRAB™ LASH POINTS
Designed for when you need to get up and go at a moment's notice.DRYHAUL™ STRAPS
The DryHaul Straps are meant to be as durable as they are comfortable, complete with custom set hardware.STOWAWAY MESH POCKET
An easy-to-access internal mesh pocket that keeps your valuables safe, dry, and tucked away.INTERIOR SLEEVE
Extra organization for your on-the-go essentials.- REMOVABLE CHEST STRAP & WAIST BELTFor added stability and security while you trek.
EXTERNAL DIMENSIONS31.8W X 17.8D X 50.8H CM
EMPTY WEIGHTCAPACITY
$450.00 -
Curve Quad Steel SUP Rack
Quad SUP Racks 4 Stand Up Paddle Board Wall Racks (pair)
Precision engineered from a multi stage anti corrosion process, this pair of Curve steel Quad SUP racks for 4 Stand up Paddle Boards are made from heavy duty steel tubing that has been powder coated and treated to provide excellent rust protection.
Store and protect your boards there is nothing worse than damaging boards while being stored in the garage where boards lying on the ground can be tripped over, or boards standing up against the wall can be knocked over. A garage ding is completely necessary!
Get organised Organise your stand up paddle boards and easily find the board you want with these quality Curve racks - finding the right board to match conditions has never been easier!
Super durable and super strong these racks will take a board that weighs 20kg no problem.
Protective Arms are surrounded in high density EVA cushioning foam to provide soft & secure storage for up to 4 SUP boards for years to come. You know you are giving your quiver the best protection - while also looking pretty damn fine!
Removable Arms this rack is designed for tight home storage spaces, and is equipped with removable arms. If you're not using the rack, you can pop the arms off with a simple push pin in seconds, saving you precious storage spaceAngled Arms arms are set on an upward 10 degree for extra secure storage of your boards. the slight angle also makes loading boards easier, and requires less space out from the wall.
Easy Installation ready to install right out of the box this rack is super easy to install and includes all mounting hardware for easy installation. Rack arms insert with a simple push pin, so assembly is a piece of cake. Image shows the pair close together, install at a suitable distance apart.
Capacity Easily supports 4 standup paddle boards up to 20kg each with fins left on (plenty of space between levels)$190.00 -
Dakine Cyclone Roll Top Pack 32L - Cascade Camo
- Waterproof welded construction with roll top closure
- Welded stash pocket with water resistant YKK® PU coated zipper
- Breathable ergonomic shoulder straps and backpanel
- Mesh side pocket
- Adjustable sternum strap
$199.00 -
Features:
- SUP soft racks feature super secure LOCKDOWN single loop system which cocoons around Stand Up Paddle Boards eliminating lift, slide and flutter
- 25mm foam padding protects vehicle roof
- *new* 25mm protective foam now extends to cocoon around SUP rails and prevent strap on rail damage!
- inside neoprene layer protects boards
- 3 connection options: thru-doors, loadbars or gutters/sills
- quick and easy to use with single tightening point
- easy board access via top load hook
- webbing doesn't run along roof reducing potential vibration damage
- fit 99% of roofed vehicles on the market
- constructed from 600D polycanvas, neoprene, 1" foam and quality metal components
- includes utility bag
- capacity: 1-2 SUP's
$139.00 -
Protect the rails of your rigid boards with the ION rail lover.
Durable rail protection
Self adhesive backing
0, 4mm thickness
Automotive standard
Medium (150cm / 7.3cm)
Was:$99.00Now:$59.00Price:$59.00
