Phix Dr. Polyester Kit Lrg
Description
NO SUN/UV CURE, USES CATALYST (Included)
Phix Doctor use ultra fresh Silmar brand Polyester resin and the highest quality products.
Will this repair kit work for my epoxy board?
No, polyester resin is not compatible with styrofoam core boards. We advise to never allow this resin to be in contact with styrofoam (EPS) cores.
You may also like ...
-
Ding All Fibreglass Cloth - 0.9m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
90 cm x 68 cm
$19.00 -
Ding All Fibreglass Cloth - 2.7m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
- 2.7m x 68 cm
$39.00 -
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
$45.00 -
The Nano Dura Resin is perfect for repairing small dings or cracks. It is small enough that you can always keep one in your car, bag or anywhere else on a surf trips.
Dura Rez cures in full sun in less than 3 minutes for a professional finish that saves you time and money! Ultra Clear, SunPowered, Fiber Filled Dura Rez Works on Epoxy and Polyester, will not harm the foam core, and NEVER hardens in the tube.
Non-yellowing SunPowered resin that sets up fast and nearly showroom perfect when the clear cover sheets are used to contour and magnify the suns effect on this premium resin.
Features.Safe for Epoxy and Polyester.
Non-Yellowing Resin.
Fiber Filled.
Super Fast 3 Minute Cure.
Endless Shelf Life.$15.00 -
Damaged your wetsuit? Ocean and Earth's Ultimate Wetsuit Repair Kit will help you fix those pesky tears and damaged seams. This wetsuit repair kit comes with neoprene repair cement and applicator, iron-on neoprene patch and heat shielding paper. Get another season out of your wetsuit or just fix that leaky hole.
KIT INCLUDES:
NEOPRENE REPAIR CEMENT:
Industrial strength neoprene cementrepairs tears & damaged seams.
IRON-ON NEOPRENE PATCH:
Strong, flexible fabric repairs larger holes,gouges & worn areas.
KIT INCLUDES:
• 30ml tube of Neoprene Repair Cement
• Cement applicator brush
• One 150mm x 125mm Iron-On Neo Patch
• Heat Shielding Paper
• Instructions Sheet$29.00 -
NO SUN/UV CURE, USES CATALYST (Included)
Phix Doctor use ultra fresh Silmar brand Polyester resin and the highest quality products.
Will this repair kit work for my epoxy board?
No, polyester resin is not compatible with styrofoam core boards. We advise to never allow this resin to be in contact with styrofoam (EPS) cores.$40.00 -
Solarez Epoxy Pro Travel Kit
- Zerovoc ® Styrofoam-safe UV cure resin
- 2-part epoxy resin for internal structural repairs
- Solarez Microlite-Epoxy for foam repairs
- Fiberglass cloth
- Rope
- Stainless Steel Scissors
- Sandpaper
- Eco-Friendly Clean Up Solvent
- Applicators
All in a crush-proof travel box.
$120.00 -
Sponge Rez Body Board Repair 15ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges.
Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores.
Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberately inhale vapours – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$16.00 -
Sponge Rez Body Board Repair 60ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges. Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores. Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberatley inhale vapors – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$39.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00 -
