O&E

O&E Compact Day Midlength Cover 

The Compact Day Midlength Cover is specifically designed to protect your midlength surfboard from the harshest conditions.

Featuring  three layers of protection, Armour Weave/ UV reflective tarpee and 25mm padded nose, tail and a fin slot. This cover will protect your midlength whether you are travelling or just going down to your local.

Fits: 1 Midlength
Includes: Fin Slot

XP EXTRA PROTECTION 25mm PANELS 
Extra protection in high impact areas. Nose, Rails and Tail.

ARMOUR WEAVE  (TOP SIDE) 
Tear proof, water repellent, tough, lightweight.

UV REFLECTIVE TARPEE (BOTTOM SIDE)
Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.

THREE LAYERS OF  PROTECTION
Top Layer: Armour Weave Polyester. 
Bottom Layer: UV Reflective Tarpee Lining.
2nd Layer: 5mm shock-absorbing foam. 
3rd (inside) Layer: Tarpee lining.

EXPANDABLE TAIL GUSSET
Accommodates boards with both fixed or removable fins. Open velcro gusset to allow for fins.

HEAVY DUTY ZIPPERS
Large, non-corrosive nylon zips.

DETACHABLE SHOULDER STRAP
20mm padded detachable strap.

HANGING HOOK 
Patented, removable hanging hook.

O&E Compact Day Longboard Cover - Black/Red

O&E Hypa Longboard Day Cover 1 Board - Black

A compact fitting surfboard cover designed for 1 longboard . This cover has anti shock and anti impact foam combined with an expandable tail gusset that can be secured shut for use with or without fins. Ideal for day-to-day surf trips.

The Hypa surfboard cover range is meticulously crafted with ( XP ) Extra Protection for the nose, tail and rail and featuring refined shapes that not only embodies performance design, but also ensure trusted and reliable protection for your quiver of surfboards

These extra safety measures mean that you can transport up to 1 longboard without the stress of damaging it. A slim refined fit, means your boards fit nice and snug.

Performance meets design. Surf at the next level.

Fits: 1 Longboard - Up to 24" wide
Includes: Fin Slot

EXPANDABLE SIDE WALL
Runs around the entire cover for a perfect fit. Velcro closure for use with or without fins.

SHOULDER STRAP
20mm padded detachable strap: Extra comfort and stashes into pocket.

HEAVY DUTY ZIPPERS
Large non-corrosive zipper heads.

INTERNAL STORAGE POCKET
An oversize velcro pocket for all of your surf accessories.

LIGHTWEIGHT LINING
Water repellent, internal lining.

HANGING HOOK
Patented removable hanging hook. Hang cover with ease.

Stand Up Paddle Lightweight Board Cover

FITS : 1 Board
FABRIC : UV Reflective Tarpee
PADDING : 5mm Waterproof
FEATURES :
• Protective nose piece both sides
• Side Gusset
• Shoulder Strap
• Non corrosive nylon zips
• Fin slot
• Removable storage hook

Fits:  1 Board
Weight: 2.4 to 3.0kgs., 
Width: 25.5 to 27.5", 

THREE LAYERS OF  PROTECTION
Top Layer: Armour Weave Polyester
2nd Layer: 10mm shock-absorbing foam
3rd (inside) Layer: Tarpee lining

XP EXTRA PROTECTION 25mm PADDED NOSE PANELS
Extra protection in high impact areas. Nose and Tail.

EXPANDABLE TAIL GUSSET WITH AIRCON MESH
Accommodates boards with both fixed or removable fins. Open velcro gusset to allow for fins.

SHOULDER STRAP
20mm padded detachable strap. Stashes into pocket.

PROTECTIVE BOTTOM SIDE NOSE PIECE
Extra tough Armour Weave Polyester.

HANGING HOOK
All covers supplied with patented removable hanging hook.

HEAVY DUTY ZIPPERS
Large, lockable zipper heads. Extra security for your boards. Compatible with TSA Travel Lock

AIRCON VENTILATION
Prolongs the life of your board by creating a constant flow of air to keep your board cool.

O&E Apex Fish Travel Cover 1 

If you're chasing the pinnacle of surfboard cover protection and durability look no further than the APEX. 

Designed for a compact fit, carrying 1 fish board this "patent applied " travel cover comes with the XPS protection systems, giving your boards unprecedented protection. Combined with 10mm anti shock foam, a zip out tail gusset for use with or without fins and aircon vent system. This cover will protect your boards so you can hit the waves with total peace of mind.

Embrace the future of surfboard protection with our innovative APEX , 'XPS' protection system, incorporating a structured external shell (XPS) for high- impact defence instilling a lifetime of trust.

APEX is designed for a lifetime of use, and our new lifetime warranty underscores our commitment to a sustainable future, reducing waste and keeping the Ocean & Earth pumping for generations to come.

The pinnacle of durability and innovation. Surf with no limits. 

Fits: 1 fish board
Includes: XPS protection system

FULL RAIL GUSSET
Runs around the entire cover for a compact fit.

AIRCON VENT (INTERNAL & EXTERNAL)
The integrated vent enhances breathability and regulates temperature to prolong your board's life. 1 air vent located on top side nose of board cover.

DETACHABLE SHOULDER STRAP
Double think padded shoulder strap for comfort.

EXPANDABLE TAIL GUSSET
Zip closure for use with or without fins, with strategically added 8mm padding for a known high damage area.

NON CORROSIVE ZIPS
Easy slide Nylon zippers.
HANGING HOOK
Patented removable hanging hook. Hang your cover with ease.

FULL RAIL GUSSET
Runs around the entire cover for a compact fit.

AIRCON VENT (INTERNAL & EXTERNAL)
The integrated vent enhances breathability and regulates temperature to prolong your board's life. 1 air vent located on top side nose of board cover.

DETACHABLE SHOULDER STRAP
Double think padded shoulder strap for comfort.

EXPANDABLE TAIL GUSSET
Zip closure for use with or without fins, with strategically added 8mm padding for a known high damage area.

NON CORROSIVE ZIPS
Easy slide Nylon zippers.
HANGING HOOK
Patented removable hanging hook. Hang your cover with ease.

XPS Extra Protection System
Structured outer shell. Strategically positioned at nose, tail and rails to protect against high impacts

XPS Nose/Tail
Armour plate tear-proof fabric
Anti-impact 7mm moulded foam [topside only]
Board cover body 10mm anti-shock foam

XPS Rails
Armour plate tear-proof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

XPS Body
Armour Weave [Light] tearproof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

Structured outer shell. Strategically positioned at nose, tail and rails to protect against high impacts

XPS Nose/Tail
Armour plate tear-proof fabric
Anti-impact 7mm moulded foam [topside only]
Board cover body 10mm anti-shock foam

XPS Rails
Armour plate tear-proof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

XPS Body
Armour Weave [Light] tearproof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

O&E APEX Longboard Travel Cover 1 - Black

If you're chasing the pinnacle of surfboard cover protection and durability look no further than the APEX.

Designed for a compact fit, carrying 1 longboard this "patent applied " travel cover comes with the XPS protection systems, giving your boards unprecedented protection. Combined with 10mm anti shock foam, a zip out tail gusset for use with or without fins and aircon vent system. This cover will protect your boards so you can hit the waves with total peace of mind.

Embrace the future of surfboard protection with our innovative APEX, 'XPS' protection system, incorporating a structured external shell (XPS) for high- impact defence instilling a lifetime of trust.

APEX is designed for a lifetime of use, and our new lifetime warranty underscores our commitment to a sustainable future, reducing waste and keeping the Ocean & Earth pumping for generations to come.

The pinnacle of durability and innovation. Surf with no limits.

Fits: 1 longboard
Includes: XPS protection system, fin slot

FULL RAIL GUSSET
Runs around the entire cover for a compact fit.

AIRCON VENT (INTERNAL & EXTERNAL)
The integrated vent enhances breathability and regulates temperature to prolong your board's life. 1 air vent located on top side nose of board cover.

DETACHABLE SHOULDER STRAP
Double think padded shoulder strap for comfort.

EXPANDABLE TAIL GUSSET
Zip closure for use with or without fins, with strategically added 8mm padding for a known high damage area.

NON CORROSIVE ZIPS
Easy slide Nylon zippers.
HANGING HOOK
Patented removable hanging hook. Hang your cover with ease.

Fits: 1-2 boards
Weight: 3.4 to 4.0kgs
Width: 20"
Depth: 90mm /3.5"

XP extra protection 25mm padded nose panels
Extra protection in high impact areas. Nose, rails and tail.

Internal compression straps
Minimises board movement whilst in transit. Boards arrive at the destination the same way you packed them.

20mm shock absorbing rail protection
Top layer: 10mm rubber bumber
2nd layer: armour weave polyester
3rd layer: 10mm shock-absorbing foam
4th (inside) layer: tarpee lining

Expandable tail gusset
Accommodates boards with both fixed or removable fins. Unzip gusset to allow for fins.

Hanging hook
Patented, removable hanging hook

Heavy duty zippers
Large, lockable zipper heads. Extra security for your boards.

Shoulder strap
20mm padded detachable strap. Stashes into pocket.

Moulded rubber side walls
Double thick ultimate rail protection for your boards.

Fits: 1-2 boards
Weight: 3.3 - 4.1kgs 
Width: 24"

XP extra protection 25mm padded nose panels. - Extra protection in high impact areas. Nose, rails and tail.

Internal compression straps. - Minimises board movement whilst in transit. Boards arrive at the destination the same way you packed them.

20mm shock absorbing rail protection.
Top layer: 10mm rubber bumber
2nd layer: armour weave polyester
3rd layer: 10mm shock-absorbing foam
4th (inside) layer: tarpee lining

Expandable tail gusset  - Accommodates boards with both fixed or removable fins. Unzip gusset to allow for fins.

Hanging hook - Patented, removable hanging hook.

Heavy duty zippers - Large, lockable zipper heads. Extra security for your boards.

Shoulder strap - 20mm padded detachable strap. Stashes into pocket.

Moulded rubber side walls - Double thick ultimate rail protection for your boards.

O&E The Bug - 6'0"

Looking for a soft board to start the groms on early? The Bug 6'0" Soft Board is the perfect introduction to waves; with a soft, durable deck and soft PU fins. This board has been designed for supreme stability to help the young ones learn and have a fun time!

Features:

• Length: 6'0

• Width: 21 5/8"

• Thickness: 3 1/8"

• Volume: 44L

• Board Weight: 3.55kg

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <75kg

O&E Hypa Fish/Short Travel Cover 2 Board - Black

A wider fitting surfboard cover designed for carrying 2 fish and or short boards. This travel cover has shock-absorbing and anti impact foam, external compression straps and 20mm of protection on the rail, nose and tail. Ideal for domestic or international surf trips.

The Hypa travel surfboard cover range is meticulously crafted with ( XP ) Extra Protection for the nose, tail and rail and featuring refined shapes that not only embodies performance design, but also ensure trusted and reliable protection for your quiver of surfboards

These extra safety measures mean that you can transport up to 2 fish and or short boards without the stress of damaging them. A wider fit, means you can add all your surf accessories, wetsuits and towels with out needing any extra luggage.

Performance meets design. Surf at the next level.

Fits: 2 fish and or short boards (Designed for wider boards )
Includes: Sewn in Board Divider and external compression straps

SKID PLATE
Reinforced fabric skid plate to protect board tails / rails. Slide / drag your board bag perfect for taking the load off your shoulders.

PADDED FIN POUCHES
Positioned in the rail of the cover for you to stash and seperate your fins from your delicate boards. 2x fin pouches for the double covers & 4x in the 3,4 & 5 board covers.

EXTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit.

SHOULDER STRAP
20mm padded detachable strap: Extra comfort and stashes into pocket.

SEWN IN PADDED DIVIDER
Protects and separates boards plus minimises wax transferring.

INTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit: boards arrive at the destination the same way you packed them.

HEAVY DUTY ZIPPERS
Large lockable zipper heads. Extra security for your boards.

INTERNAL STORAGE POCKET
An oversize velcro pocket for all of your surf accessories.

LIGHTWEIGHT LINING
Water repellent, internal lining.

HANGING HOOK
Patented removable hanging hook. Hang cover with ease

O&E Hypa Fish/Short Travel Cover 3 Board - Black

A wider fitting surfboard cover designed for carrying 3 fish and or short boards. This travel cover has shock-absorbing and anti impact foam, external compression straps and 20mm of protection on the rail, nose and tail. Ideal for domestic or international surf trips.

The Hypa travel surfboard cover range is meticulously crafted with ( XP ) Extra Protection for the nose, tail and rail and featuring refined shapes that not only embodies performance design, but also ensure trusted and reliable protection for your quiver of surfboards

These extra safety measures mean that you can transport up to 3 fish and or short boards without the stress of damaging them. A wider fit, means you can add all your surf accessories, wetsuits and towels with out needing any extra luggage.

Performance meets design. Surf at the next level.

Fits: 3 fish and or short boards (Designed for wider boards )
Includes: Sewn in Board Divider and external compression straps

SKID PLATE
Reinforced fabric skid plate to protect board tails / rails. Slide / drag your board bag perfect for taking the load off your shoulders.

PADDED FIN POUCHES
Positioned in the rail of the cover for you to stash and seperate your fins from your delicate boards. 2x fin pouches for the double covers & 4x in the 3,4 & 5 board covers.

EXTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit.

SHOULDER STRAP
20mm padded detachable strap: Extra comfort and stashes into pocket.

SEWN IN PADDED DIVIDER
Protects and separates boards plus minimises wax transferring.

INTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit: boards arrive at the destination the same way you packed them.

HEAVY DUTY ZIPPERS
Large lockable zipper heads. Extra security for your boards.

INTERNAL STORAGE POCKET
An oversize velcro pocket for all of your surf accessories.

LIGHTWEIGHT LINING
Water repellent, internal lining.

HANGING HOOK
Patented removable hanging hook. Hang cover with ease.

 TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.

MIDDLE - CORE/ STRINGERS
EPS (Extruded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included). 

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

OCEAN & EARTH Mark Richards Ezi-rider Twin Fin

O&E Hypa Fish/Short Travel Cover 4 Board - Black

A wider fitting surfboard cover designed for carrying 4 fish and or short boards. This travel cover has shock-absorbing and anti impact foam, external compression straps and 20mm of protection on the rail, nose and tail. Ideal for domestic or international surf trips.

The Hypa travel surfboard cover range is meticulously crafted with ( XP ) Extra Protection for the nose, tail and rail and featuring refined shapes that not only embodies performance design, but also ensure trusted and reliable protection for your quiver of surfboards

These extra safety measures mean that you can transport up to 4 fish and or short boards without the stress of damaging them. A wider fit, means you can add all your surf accessories, wetsuits and towels with out needing any extra luggage.

Performance meets design. Surf at the next level.

Fits: 4 fish and or short boards (Designed for wider boards )
Includes: Sewn in Board Divider and external compression straps

SKID PLATE
Reinforced fabric skid plate to protect board tails / rails. Slide / drag your board bag perfect for taking the load off your shoulders.

PADDED FIN POUCHES
Positioned in the rail of the cover for you to stash and seperate your fins from your delicate boards. 2x fin pouches for the double covers & 4x in the 3,4 & 5 board covers.

EXTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit.

SHOULDER STRAP
20mm padded detachable strap: Extra comfort and stashes into pocket.

SEWN IN PADDED DIVIDER
Protects and separates boards plus minimises wax transferring.

INTERNAL COMPRESSION STRAPS
Minimises board movement whilst in transit: boards arrive at the destination the same way you packed them.

HEAVY DUTY ZIPPERS
Large lockable zipper heads. Extra security for your boards.

INTERNAL STORAGE POCKET
An oversize velcro pocket for all of your surf accessories.

LIGHTWEIGHT LINING
Water repellent, internal lining.

HANGING HOOK
Patented removable hanging hook. Hang cover with ease.

O&E Mark Richards Ezi Rider Twin Fin

An allround, super fun board designed and tested by Mark Richards. Fast, fun and loose for shorey shredding.  

Dimensions: 5'6 X 21' X 2 3/4'

Volume: 40L

Core: EPS - 2 Stringers

Deck: IXL EBS

Bottom: 1mm HDPE

Fins:  2x 5.5" Soft PU Twin

Fin Box: Interchangeable Fins

Rider Weight: <70kg

Features:

• TWIN FIN SET UP - MR Designed Fin template. 2X Soft PU fins and fin key included. Compatible with traditional dual tab fins.

Additional Soft Board Features: 

• EPS Core - Highly waterproof & lightweight. 3x stringers increase board strength and maintain rocker.
• HDPE Bottom Plate - 1mm thick HDPE high density polyethelene plate. Durable, extra strength performance slick. Available in a range of colours.
• Interchangeable Fin Box - Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).
• Thermal Reactive Simulation - To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

IXL EBS Deck Skin - Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant.

Ocean & Earth Ezi Rider Softboard 6'0

Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

Length: 6'0

Width: 21 5/8"

Thickness: 3 1/8"

Volume: 47L

Board Weight: 3.75kg

Fins: 3 x 4.5" Soft PU

Fin Box: Thruster - Interchangeable Dual Tab

Rider Weight: <85kg

Ocean & Earth Ezi Rider Softboard 6'6"

Summer fun for the whole family. The Ezi-Rider 6'0 soft board is a stable and versatile surfboard, great for entry level surfing, right through to small wave shredding, the whole family will be ripping this summer. Made from durable, safe and high quality materials, the Ezi-Rider soft board should be part of your quiver this summer.

Features:
TOP - DECK
Cross-linked IXL PE skin with WBS (Water Barrier Skin). Highly water resistant and extremely durable. Excellent grip and impact resistant

MIDDLE - CORE/ STRINGERS
EPS (Expanded Polystyrene) highly waterproof & lightweight. 2X stringers (3X stringers on 8'0 & 9'0) - increase board strength and maintain rocker.

BOTTOM - SLICK
1mm thick high density polyethelene (HDPE) plate. Durable, extra strength performance slick.

INTERCHANGEABLE FIN BOX
Compatible with most major fin brands. Allows quick and easy fin changing. Secures with fin key (included).

THERMAL REACTIVE SIMULATION
To help protect against de-lamination, all soft boards are tested in a heat induced environment at 70°C for two hours.

• Length: 6'6

• Width: 21 1/4"

• Thickness: 3"

• Volume: 52L

• Board Weight: 4.08kg

• Fins: 3 x 4.5" Soft PU

• Fin Box: Thruster - Interchangeable Dual Tab

• Rider Weight: <90kg