Patagonia Organic Cotton Midweight Fjord Flannel Shirt - Ice Caps: Burl Red

Patagonia Organic Cotton Midweight Fjord Flannel Shirt - Lagom Blue

A balance of speed, flow and response in a variety of conditions. PC-7 fins.

Overview

• A balance of speed, flow and response in a variety of conditions.
• Lightweight performance fin with responsive tip flex and hydrodynamic foil on the side fins.
• Neutral all-round template with Inside Foil Technology (IFT).

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• All board types.
• Will fit the FCS II Fin System when used with grub screws and the FCS Infill Kit.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Patagonia Organic Cotton Midweight Fjord Flannel - Fields: New Navy

Patagonia Organic Cotton Midweight Fjord Flannel Shirt - Ice Caps: Belay Blue

The Reactor II 2mm Back Zip Short Sleeve Spring Wetsuit is great for those summer surf sessions. The Reactor will protect you from the cold water, wind and provide UV protection which will enable you to last longer and enjoy every minute in the surf.  First In, Last Out, More Fun.

Features.
Top Sleeve/Under Sleeve: FluidFlex™.
Chest/Back: Mesh Smoothskin Fluid Foam.
Smoothskin Fluid Foam Neck.
30% FluidFlex™/70% Fluid Foam.
YKK Back Zip System.
Single Super Seal Collar: Fully Adjustable Seal.
Hidden Key Pocket.
Flatloc Stitched (Breathable Seams).
Strategic Seamless Paddle Zones.

Picture Organic Cotton Klob Crew Sweater

FCS2 Performer Performance Core Tri - Teal Black

Balance of speed, flow and response. Suitable for all conditions.

Overview

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg

Fcs2 Carver Performance Core Tri Fins - Acid Black

Powerful, drawn-out turns. Excels on open face waves.

Overview

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core

Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

FCS II Accelerator PC Tri Fin Set

FCS II Performer PC Tri Fin Set - Mango

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCS II Performer Performance Core Tri Fin Set - Tranquil Blue

Balance of speed, flow and response. Suitable for all conditions. 

Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.

Ideal Conditions
A wide range of conditions from beach breaks to point breaks.

Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.

Fin Family
Performer: Find Balance. A balance of speed, flow & response

Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.

FCSII Pivot Performance Glass Fin - Charcoal Grey

Overview

• Pivot in the pocket, lock the rail on the wave face and run the nose.
• Upright fin with minimal sweep and base.
• Loose fin for performing tighter turns.
• Bigger sizes ideal for logs and nose riding (9" + 10").
• 2 + 1 Compatible.
• Designed to be used in most existing FCS Longboard boxes. No new box required.

Performance Glass

Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.

The FCS II Tool-Less Longboard System

• No need for a plate and screw.
• Ability to adjust your fin position in the box mid surf.
• Easily insert or remove your fin in seconds. No fin key required.
• Designed to be used in most existing Longboard boxes. No new box required.

Speed & tight turns. Ideal for beach breaks.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for speed and tight turns, with added tail release.
• Upright template allows for tighter, more acute directional changes.
• Smaller centre fin for increased pivot and tail release.
• Ideal for surfers who like to perform fast, progressive turns.

Ideal Conditions

• Suitable for hollow waves, particularly good for beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for performance shortboards with moderate-to-low rocker.

Fin Family

• Reactor: Find Speed. Speed, tight turns & snaps.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Balance of speed, flow and response. Suitable for all conditions.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for a balance of speed, flow & response.
• Well proportioned template with Inside Foil Technology (IFT).
• Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
• New Linear Flex: 3D Twist and roll action delivers a smoother feel.

Ideal Conditions

• A wide range of conditions from beach breaks to point breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for all board types.

Fin Family

• Performer: Find Balance. A balance of speed, flow & response.

Performance Core Carbon

Our new PC Carbon construction with ‘Linear Flex’ produces a 3D twist & roll action resulting in a fast, super responsive fin that feels much smoother through turns. PCC fins suit fast surfing and are favoured by more advanced surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL Under 55Kg 
SMALL 55Kg - 70Kg 
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg 
X-LARGE Over 85Kg 

Powerful, drawn-out turns. Excels on open face waves.

Overview

LIGHTER CONSTRUCTION. SMOOTHER FEEL.

The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.

• Designed for powerful, drawn-out turns with added hold.
• Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
• Ideal for power surfers who like to push hard against their fins and draw out their turns.

Ideal Conditions

• Open face, down-the-line waves, particularly good in point and reef breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Recommended for boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core Carbon

Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.

The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.

The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Fcs2 Al MerricK Performance Core Tri

Al Merrick's 'AM' shaper fin in ultralight AirCore. Raked side fins produce exceptional speed and drive.

Overview

• Al Merrick's template is designed for radical, progressive surfing.
• The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large template offer quick release through turns.
• Updated PC construction featuring our ultralight AirCore.

Ideal Conditions

• Hollow steep waves, punchy beach breaks.

Board Types

• Designed to fit the FCS II Fin System.
• Performance boards with deep concaves and moderate-to-extreme rocker.

Fin Family

• Carver: Find Power. Powerful, drawn-out turns with added hold.

Performance Core + AirCore

Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin. 

AirCore technology reduces the amount of fiberglass required in the RTM moulding process making it much lighter while allowing total manipulation of the flex.

X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)

Picture Shari Tech Hoodie

The ideal partner for any summer excursion

Our Shari technical hooded sweatshirt belongs to our range of high-performance eco-designed products made for high-intensity summer adventures in the great outdoors.

Ideal for training, hiking, or running, this lightweight hooded sweatshirt features Dry Now technology for unparalleled breathability. Picture also applied an antimicrobial treatment to keep you fresh all day long. The ergonomic hood provides great protection so that you can enjoy playing outdoors without interruption.

Dry-feel antimicrobial treatment Picture's antimicrobial treatment neutralizes odours so that you stay fresh when active. It also means your clothes will last longer as they need to bem washed less often.

DryNow wicking technology High perfomance technology using a blend of hydrophilic and hydrophobic recycled polyester fibres that wick moisture away from the skin to the surface of the garment where it can evaporate quickly

Reflective details  Strategically placed to ensure that you are visible in the dark