7'4"

O&E Compact Day Midlength Cover 

The Compact Day Midlength Cover is specifically designed to protect your midlength surfboard from the harshest conditions.

Featuring  three layers of protection, Armour Weave/ UV reflective tarpee and 25mm padded nose, tail and a fin slot. This cover will protect your midlength whether you are travelling or just going down to your local.

Fits: 1 Midlength
Includes: Fin Slot

XP EXTRA PROTECTION 25mm PANELS 
Extra protection in high impact areas. Nose, Rails and Tail.

ARMOUR WEAVE  (TOP SIDE) 
Tear proof, water repellent, tough, lightweight.

UV REFLECTIVE TARPEE (BOTTOM SIDE)
Thick, heavy duty outer fabric. Water proof, UV and stain resistant designed to reflect heat and protect boards.

THREE LAYERS OF  PROTECTION
Top Layer: Armour Weave Polyester. 
Bottom Layer: UV Reflective Tarpee Lining.
2nd Layer: 5mm shock-absorbing foam. 
3rd (inside) Layer: Tarpee lining.

EXPANDABLE TAIL GUSSET
Accommodates boards with both fixed or removable fins. Open velcro gusset to allow for fins.

HEAVY DUTY ZIPPERS
Large, non-corrosive nylon zips.

DETACHABLE SHOULDER STRAP
20mm padded detachable strap.

HANGING HOOK 
Patented, removable hanging hook.

O&E Apex Fish Travel Cover 1 

If you're chasing the pinnacle of surfboard cover protection and durability look no further than the APEX. 

Designed for a compact fit, carrying 1 fish board this "patent applied " travel cover comes with the XPS protection systems, giving your boards unprecedented protection. Combined with 10mm anti shock foam, a zip out tail gusset for use with or without fins and aircon vent system. This cover will protect your boards so you can hit the waves with total peace of mind.

Embrace the future of surfboard protection with our innovative APEX , 'XPS' protection system, incorporating a structured external shell (XPS) for high- impact defence instilling a lifetime of trust.

APEX is designed for a lifetime of use, and our new lifetime warranty underscores our commitment to a sustainable future, reducing waste and keeping the Ocean & Earth pumping for generations to come.

The pinnacle of durability and innovation. Surf with no limits. 

Fits: 1 fish board
Includes: XPS protection system

FULL RAIL GUSSET
Runs around the entire cover for a compact fit.

AIRCON VENT (INTERNAL & EXTERNAL)
The integrated vent enhances breathability and regulates temperature to prolong your board's life. 1 air vent located on top side nose of board cover.

DETACHABLE SHOULDER STRAP
Double think padded shoulder strap for comfort.

EXPANDABLE TAIL GUSSET
Zip closure for use with or without fins, with strategically added 8mm padding for a known high damage area.

NON CORROSIVE ZIPS
Easy slide Nylon zippers.
HANGING HOOK
Patented removable hanging hook. Hang your cover with ease.

FULL RAIL GUSSET
Runs around the entire cover for a compact fit.

AIRCON VENT (INTERNAL & EXTERNAL)
The integrated vent enhances breathability and regulates temperature to prolong your board's life. 1 air vent located on top side nose of board cover.

DETACHABLE SHOULDER STRAP
Double think padded shoulder strap for comfort.

EXPANDABLE TAIL GUSSET
Zip closure for use with or without fins, with strategically added 8mm padding for a known high damage area.

NON CORROSIVE ZIPS
Easy slide Nylon zippers.
HANGING HOOK
Patented removable hanging hook. Hang your cover with ease.

XPS Extra Protection System
Structured outer shell. Strategically positioned at nose, tail and rails to protect against high impacts

XPS Nose/Tail
Armour plate tear-proof fabric
Anti-impact 7mm moulded foam [topside only]
Board cover body 10mm anti-shock foam

XPS Rails
Armour plate tear-proof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

XPS Body
Armour Weave [Light] tearproof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

Structured outer shell. Strategically positioned at nose, tail and rails to protect against high impacts

XPS Nose/Tail
Armour plate tear-proof fabric
Anti-impact 7mm moulded foam [topside only]
Board cover body 10mm anti-shock foam

XPS Rails
Armour plate tear-proof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

XPS Body
Armour Weave [Light] tearproof fabric
10mm anti-shock foam
Lightweight water repellent internal lining

Modern Double Wide EpoxySoft Surfboard - White

 What happens when you take a longboard and make it shorter, and re-distribute the foam into the outline and thickness? Answer, you get the Modern Double Wide. This high volume mid-length surfboard offers great stability and exceptional paddle power for beginner-to-intermediate surfers.

Having maximum surface area gives this surfboard amazing side-to-side stability so it’s perfect for beginner and intermediate riders as they jump to their feet.

CONTOURS: Flat through the nose helps with early entry into softer waves, vee into double rolled concave in the back half of the board means more capable riders can still make flowing directional changes.

ROCKER: Relaxed through the entire length of the board with gentle lift in the nose and tail. This allows the board to paddle exceptionally well, catch waves easily, and maintain forward flow even in the white-water, while still allowing the board to turn in a smooth arc.

FOIL: Boxy rails and a high-volume foil from nose-to-tail means this board will sit high on the water making it perfect for maintaining speed and distance in smaller conditions.

Available in three key sizes, the Modern Double Wide is perfect for anyone looking for the stability and paddle power of a longboard in a more manageable size board. NOTE: Rider weight is based on board volume and intermediate rider skill level

The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.

These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.

Torq's fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.

Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing

Torq Channel Islands M23 7'4"

The M23 comes from the storied M13 bloodlines, a favorite hybrid board Al Merrick made for himself and rode variants of for decades from fun Rincon to maxing Sunset. A true high performance hybrid that caters to the widest possible type and size of surfer - and for the widest range of wave conditions. Not to be confused with the CI Mid, the M23 carries more foam, boasting a fuller rail and sleeker nose outline. It paddles like a champ while still riding more like a shortboard.

7'4 x 21 3/4 x 2 7/8 (50.4L)

What happens when you take a longboard and make it shorter, and re-distribute the foam into the outline and thickness? Answer, you get the Modern Double Wide. This high volume mid-length surfboard offers great stability and exceptional paddle power for beginner-to-intermediate surfers.

OUTLINE: Generous nose outline up front with parallel rails, leading into a wide tail. Having maximum surface area gives this surfboard amazing side-to-side stability so it’s perfect for beginner and intermediate riders as they jump to their feet.

CONTOURS: Flat through the nose helps with early entry into softer waves, vee into double rolled concave in the back half of the board means more capable riders can still make flowing directional changes.

ROCKER: Relaxed through the entire length of the board with gentle lift in the nose and tail. This allows the board to paddle exceptionally well, catch waves easily, and maintain forward flow even in the white-water, while still allowing the board to turn in a smooth arc.

FOIL: Boxy rails and a high-volume foil from nose-to-tail means this board will sit high on the water making it perfect for maintaining speed and distance in smaller conditions.

PERFORMANCE: Built using our SLX construction which produces a light, responsive, versatile surfboard that is very sensitive under foot and rides well in a wide variety of conditions

Available in two key sizes, the Modern Double Wide is perfect for anyone looking for the stability and paddle power of a longboard in a more manageable size board.

Technical Infomation

Torq Tec Rusty Egg Not - White

Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.

TEC - TORQ EPOXY COMPOSITE

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.

The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.

MCCOY