- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- Fcs2 Reactor Pc Quad Rear - Medium
Fcs2 Reactor Pc Quad Rear - Medium
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
- Quad Rear (2 fin) set.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
FCS2 Performer Performance Core Tri - Teal Black
Balance of speed, flow and response. Suitable for all conditions.Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$179.00 -
Balance of speed, flow and response. Suitable for all conditions.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- New Linear Flex: 3D Twist and roll action delivers a smoother feel.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core Carbon
Our new PC Carbon construction with ‘Linear Flex’ produces a 3D twist & roll action resulting in a fast, super responsive fin that feels much smoother through turns. PCC fins suit fast surfing and are favoured by more advanced surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Fcs2 Christenson Performance Glass Twin Fin
The Christenson Twin Fin set provides smooth and fast down the line speed.
From high performance twins to more traditional shapes, this is a perfect compliment to your twin fin. This set provides smooth and fast down the line speed.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Glass
Performance Glass (PG) fins are machine cut from layers of solid fiberglass. These fins are stiff, and are widely used by pro level surfers because the integrity of the flex is maintained under immense force, and in the most extreme of conditions and situations.
$209.00 -
Fcs2 Performer Neo Glass Eco Tri Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Size
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgNeo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm
$159.95 -
Fcs2 Akila Aipa Twin + Stabiliser Performance Glass
The FCS II Aipa Twin+1 Fin Set, designed by Hawaiian shaper Akila Aipa, redefines the classic theory of the twin-fin design and transforms it into a more high-performance mindset. The Aipa twin's fiberglass material combined with a wide base and extra tall height gives this fin maximum drive, while the thinner tip offers release and spring off the top. This set performs great for lightweight surfers and pairs best with board designs featuring pulled in tails.$229.00 -
Fcs2 Mick Fanning PG Twin+1
NEW RELEASE: Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.
Overview
- Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
- Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
- The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
- Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM molding process making it much lighter while allowing total manipulation of the flex.
X-LARGE (One size suits all)
$229.00 -
Fcs2 Kolohe Andino Tri Fins - Black Blue
Kolohe Andino's 'KA' signature fin. Delivers a lively mix of drive, pivot and release.
Overview
- Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release.
- Designed for performing fast, explosive turns and airs on and above the wave.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$209.00 -
FCS II Accelerator PC Tri Fin Set
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.39 111.5 4.58 116.3 15.28 9860 33.7 Flat LRG 4.50 114.3 4.70 119.2 16.06 10360 33.7° Flat $179.00 -
FCS II Al Merrick PC Tri Fin Set - Yellow
Al Merrick's 'AM' Performance Core shaper fin. Raked side fins produce exceptional speed and drive.
Overview
Al Merrick's template is designed for radical, progressive surfing.
The raked side fins produce exceptional speed and drive, while the smaller centre fin on the medium and large templates offer quick release through turns.
Ideal Conditions
Hollow steep waves, punchy beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Performance boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.26 108.1 4.26 108.0 13.02 8400 35.5° Flat SML 4.37 111.0 4.37 111.0 13.71 8846 35.5° Flat MED (Side) 4.57 116.0 4.53 115.0 14.89 9608 36.6° Flat MED (Ctr) 4.33 110.0 4.41 112.0 13.72 8852 35.0° Flat LRG (side) 4.61 117.1 4.69 119.0 15.63 10083 36.3° Flat LRG (Ctr) 4.47 113.5 4.45 113.0 14.68 9469 38.6° 50/50 $209.00 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II HS "Hayden Shapes" PC Carbon Medium Tri Quad Set
Haydenshapes 'HS' shaper fin. An all round template with longer base for exceptional speed when driving off the bottom.
Overview
- FCS II Tri-Quad (5 fin) Shaper Fin designed by Hayden Cox from Hayden Shapes.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker.
- This fin produces exceptional speed when driving off the bottom, especially on longer open face waves.
Ideal Conditions
- A wide range of conditions, and waves.
Board Types
- Designed to fit the FCS II Fin System.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$329.00 -
FCS II Sharpeye PC Medium Tri Fins
Marcio Zouvi's 'Sharp Eye' shaper fin.
Overview
Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.
- Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
- High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
- Controlled high-speed turns in punchy conditions.
- Suited to performance and hybrid shortboards.
Sharpeye
Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
- Performs well in punchy conditions.
Board Types
- Designed to fit the FCS II Fin System.
- For all board types. Best suited to performance and hybrid shortboards.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)$199.00