ELEMNT Double Yolk - Smoke Green
ELEMNT Double Yolk - Smoke Green
The Elemnt Double yolk, is a mid length egg twin fin model that can paddle and cruise like a midlength, but with more hold, drive and manoeuvrability. Its design has a medium/low rocker curve, and a combination of pronounced vee and deep double concave bottom contours with low rails. Can be ridden in small slow mushy conditions, yet still perform when its overhead and hollow.
Construction:
EPS/epoxy Fin System: FCSII, Futures -
Twin Rocker: medium nose entry, low off the tail
Bottom Contours: Vee to subtle single and deep double concave
Tail Shape: Pulled in round tail
Does not come with fins.
Dimensions:
- 6’4" 21 1/2" 2 5/8" 36.85
- 6’8" 21 3/4" 2 5/8" 39.45L
- 7’0" 22" 2 3/4" 44L
- 7’2" 22 1/4" 2 13/16" 46.75
- 7’6" 22 5/8" 2 7/8" 50.80L
This item is considered bulky. Please Click Here to view more info on bulky goods.
You may also like ...
-
This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.
Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance. Tri-fin set-up.
The fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing.
Level - 2 > Expert Wave Height - 2 - 6ft+ Dimensions - 7’2” x 21 1/4” x 2 3/4” Recommended Rider Weight - 50-90kgs / 110-200lbs Volume - 47.2 ltr FINS: 3 Fins supplied – Futures template F6
CONSTRUCTION
$719.00 -
The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft Dimensions - 7’4” x 22” x 3” Recommended Rider Weight - 55-110 kg / 120-240 lbs Volume - 56 ltr Torq's fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing
$839.00 -
The Volume Plus takes the trend for high volume wide boards into the Funboard model, creating a board with the stability and paddle ability of a much longer board, but in a compact, easier to turn package.
These boards suit all surfers of all abilities, whether looking for a first board or quiver builder for fun days. The high volume makes it super easy to catch waves while the rocker and bottom contours make this lively and agile underfoot with more performance than you would expect from a larger board. Great for beginners, great for bigger surfers wanting a shorter board. Tri-fin set-up.
Torq's fin system is designed by Futures Fins of California - one of the most respected fin systems on the planet.
Torq TET surfboards all come with fins. The ModFun shapes come with 3 fin boxes and a Thruster fin set offering an even balance of drive and release for all round surfing.
Level - 1 > Expert Wave Height - 2 - 6ft+ Dimensions - 7’8” x 22 1/2” x 3 3/16” Recommended Rider Weight - 65-130 kg / 140-280 lbs Volume - 64 ltr $879.00 -
ELEMNT
ELEMNT SCRAMBLED EGG - FCSII/CAMEL BROWN
“The Scrambled Egg has a constant curve extra wide outline shape, rocker is low through middle of board with late nose kick, with a very subtle single concave bottom contour starting from the nose and middle section, which feeds into a deep double concave and pronounced vee through the fin area.
This board will paddle very well and flow easily through turns. “Adam Dalli
EPS | EPOXY
Constructed using a 36 gram EPS core with a wood stringer, each board is hand laminated using high grade epoxy resin with optical brightener, or resin tint colour, 6 + 4oz fibreglass deck, 6oz bottom plus 4oz fin patch providing a lighter, stronger board.$849.00 -
This crossover range caters to all levels of surfers in virtually every condition. From waist high mush to overhead and hollow. The versatility of the Mod Fun makes them an excellent choice if you need one board to handle all the conditions where you live and travel.
Featuring a medium full nose and shallow mid-entry there is enough volume for smaller days and weaker surf. As the surf jumps up, step back and the board transforms. You’ll find a board that feels shorter than it’s length, delivering predictable handling and performance. Tri-fin set-up.
Level - 1 > Expert Wave Height - 2 - 6ft+ Dimensions - 6’8” x 21” x 2 3/4” Recommended Rider Weight - 40-80kg / 90-175lbs Volume - 41.8 l FINS: 3 Fins supplied – Futures template F6
CONSTRUCTION
$699.00 -
MCCOY
“This design is the first Nugget I shaped in 1994.
Proven to be a very versatile performer in a wide range of wave conditions from 1′ ~ 8′ all around the surfing world; thicker wider and shorter with more volume and buoyancy than you have had before, easy to paddle and catch waves, easy to control, with more speed than you have had in years! When it starts to barrel, you will be laughing.” Geoff McCoy
Biaxial Fibre Glass has about half of its fibres aligned along the length of the cloth (0 degrees) and about half across the cloth (90 degrees) lending itself as a perfect option for creating a controlled flex pattern.Expanded Polystyrene (EPS) foam is a version of polystyrene foam typically found in the core of Firewire surfboards. EPS is typically the lightest of the three foams used in surfboard construction resulting in a much lighter board translating to increased buoyancy and floatation. Basically the lowest density or lightest board will float you the best! The advantage of better buoyancy is added paddling speed and increased manoeuvrability allowing you to ride a smaller board. EPS foam core is also less likely to deteriorate over time!
Epoxy Resin is a healthier alternative to polyester as epoxy emits 50-75% fewer VOCs (volatile organic compounds) than polyester resin, which means a decrease in harmful chemicals in the shop and the environment in general. In fact, epoxy is a common household item, safe to use without a mask and with only moderate ventilation. Epoxy is lighter than polyester. Under most circumstances, resin makes up a large part of a completed board’s overall weight. Not only is epoxy lighter than polyester, but less is needed per coat. This ends up meaning a lighter surfboard – a big plus for most surfers. The biggest bonus However is the durability and strength of epoxy resin.
All XF boards are constructed using a 36gram EPS core with a high-grade timber stringer, each board is hand laminated using epoxy resign and biaxial fibreglass on the deck providing a lighter, stronger board that feels fast and responsive under your feet increasing performance in a wide variety of conditions!
LENGTH WIDTH THICKNESS VOLUME 5’6 20 2 5/8 34 5’8 19 3/4 2 5/8 35 5’11 20 1/4 2 5/8 37 6’1 20 3/4 2 3/4 41 6’3 21 2 3/4 43 6’6 21 1/4 2 7/8 47 6’8 21 1/4 2 7/8 49 6’10 21 1/2 2 7/8 51 7’0 21 1/2 3 55 7’2 21 1/2 3 56 7’4 21 3/4 3 1/8 61 7’6 21 3/4 3 1/8 63 7’9 21 3/4 3 1/8 65 8’0 22 3 1/8 68 $1,145.00 -
This is a wolf in sheep’s clothing. This is a funboard on steroids: on paper it’s a funboard and if you’re looking to catch green waves and do some turns, the width, volume and length means this board will do it all day long – it’s perfect for you. But in the hands of a seasoned surfer it’ll come alive.
Think of it as a shortboard with a little extra width in the nose but all the performance features to surf hard and fast. One customer genuinely told us “I was smiling so much I got sunburnt teeth!”.
- 6'6 x 21 3/4 x 2 3/4 (43.5L)
- 6'10 x 22 1/2 x 2 7/8 (49.1L)
- 7'2 x 22 3/4 x 3" (53.7L)
- 7'6 x 23 x 3 (57.5L)
ACT:
Torq ACT surfboards are the world’s first EPS/Epoxy Pre-Preg surfboards. The technological advantages are immense, but the most significant advantage is 100% controlled process with ZERO surplus resin.
On any surfboard the resin’s function is to hold the fiber in place. It offers little structural integrity of it’s own, little flex and little impact strength. As a material without the fiber it is heavy and brittle. Any surplus resin is dead weight - resisting flex, adding weight.
With Pre-Preg process the perfect amount of resin is added to the cloth by machine, before the shaped blank is laid up - zero surplus, zero dead weight.
$1,099.00 -
Torq Tec Rusty Egg Not - White
Simply put, the Egg Not is a squash tail version of our mid-length board, the eGG. With the increasing popularity of mid-lengths, we decided it was more or less a given that we offer a squash tail mid-length board. The Squash tail adds a little more area, lengthens the rail line, and has a more pivoty feel compared to a roundtail. The Egg Not is a great board to have in your quiver. When the surf is average, you’ll have plenty of wave catching ability and it will carry through sections but the board will still be loose enough to turn with ease. As a plus, when the surf gets a bit bigger, it still works surprisingly well! The Egg Not features a relaxed rocker on the front end of the board which helps with paddle speed, wave catching, and overall glide. The curve is a bit above average which translates to helping tighten the arc of your turns without giving up speed. The thickness of the board is a little on the thin side for a board this size. These leaner rails make the board easier to put in the water and also helps it hold better in bigger surf. Fin setup here is your call. For a higher performance feel we recommend a 4-fin setup. If you’re looking for something a little cruisier or more traditional feel do a 2 plus one setup.
’10 x 20.75” x 2.74” - 43.8 ltr 7’0 x 21” x 2.8” - 46.5 ltr 7’2 x 21.25” x 2.88” - 49.6 ltr 7’4 x 21.5” x 2.96” - 53.1 ltr 7’6 x 21.75” x 3.05” - 57 ltr TEC - TORQ EPOXY COMPOSITE
Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.
The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.
The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.
$1,199.00
