FCS2 Sharp Eye Matt Biolos PC Tri Fins
FCS2 Sharp Eye Matt Biolos PC Tri Fins
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
You may also like ...
-
Fcs2 Performer Glass Flex Tri
Reliable all-round fin for a diverse range of surfers, conditions and board types.
Well proportioned template with Inside Foil Technology (IFT) delivering a balance of drive, pivot and hold.
Designed for surfers wanting a combination of speed and maneuverability with flow between turn
Ideal Conditions.
A wide range of conditions from beach breaks to point breaks.
Board Types.
Recommended for all board types.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
Fin Specs.Base: 4.25" / 108mm
Depth: 4.43" / 112mm
Area: 14.03"2 / 9054mm2
Sweep: 33.7o
Foil: InsideGlass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and maneuvers.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85KgBASE ” BASE MM DEPTH ” DEPTH MM AREA ” AREA MM SWEEP
DEGREE
FOIL Performer X-S 4.13 105 4.3 109 13.26 8554 33.7 IFT Performer SML 4.25 108 4.43 112 14.03 9054 33.7 IFT Performer MED 4.37 111 4.55 115 14.81 9554 33.7 IFT Performer LRG 4.48 114 4.67 118 15.58 10054 33.7 IFT Performer X-LGE 4.59 117 4.78 121 16.36 10554 33.7 IFT $89.00 -
Fcs2 Carver Performance Core Tri Fins - Acid Black
Powerful, drawn-out turns. Excels on open face waves.
Overview
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Speed & tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
- Quad Rear (2 fin) set.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$119.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$89.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
Fcs2 Mick Fanning PG Twin+1
NEW RELEASE: Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.
Overview
- Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
- Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
- The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
- Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM molding process making it much lighter while allowing total manipulation of the flex.
X-LARGE (One size suits all)
$229.00 -
Fcs2 Modern Keel Twin Fins - White
- Upright keel template designed for traditional fish shapes.
- Lower sweep (rake) than most conventional, wider based keels which allows it to pivot in a really tight radius.
- High area and depth not only delivers a feeling of control when pushed harder on the open face, but helps to maintain tremendous speed through roundhouse cutbacks.
- Black & Clear in Performance Glass, White in new PC AirCore material.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
$189.00 -
Fcs2 Mark Richards Tri Fins - Black White Swirl
NEW SEASON COLOURS
MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.
Overview
- Mark Richard's famous twin template produces exceptional drive and speed.
- The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
$209.00 -
FCS II Carver PC Tri Fin Set - Eucalyptus
Powerful, drawn-out turns. Excels on open-face waves.
Overview
Designed for powerful, drawn-out turns with added hold.
An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
MED 4.47 113 4.54 115 14.96 9650 37 Flat LRG 4.58 116 4.66 118 15.73 10150 37 Flat XL 4.69 119 4.77 121 16.51 10650 37 Flat $179.00 -
FCS II HS "Hayden Shapes" PC Carbon Medium Tri Quad Set
Haydenshapes 'HS' shaper fin. An all round template with longer base for exceptional speed when driving off the bottom.
Overview
- FCS II Tri-Quad (5 fin) Shaper Fin designed by Hayden Cox from Hayden Shapes.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker.
- This fin produces exceptional speed when driving off the bottom, especially on longer open face waves.
Ideal Conditions
- A wide range of conditions, and waves.
Board Types
- Designed to fit the FCS II Fin System.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$329.00 -
FCS II Sharpeye PC Medium Tri Fins
Marcio Zouvi's 'Sharp Eye' shaper fin.
Overview
Marcio Zouvi's 'Sharp Eye' shaper fin. A versatile all-round Performance Core fin with a larger base, ideal for controlled power turns in critical sections.
- Developed in conjunction with Marcio Zouvi from Sharp Eye Surfboards.
- High Performance fin with a larger base, maintains lots of drive with plenty of release off the lip
- Controlled high-speed turns in punchy conditions.
- Suited to performance and hybrid shortboards.
Sharpeye
Beginning his shaping career in the 80's, Marcio Zouvi and his crew have designed board templates for the highest-performing surfers on tour. With a large focus on premium shortboard designs and progressive surfing in mind, Sharp Eye surfboards have become the board of choice for CT surfers like Filipe Toledo, Barron Mamiya and Sally Fitz.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
- Performs well in punchy conditions.
Board Types
- Designed to fit the FCS II Fin System.
- For all board types. Best suited to performance and hybrid shortboards.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)$199.00
