- Home /
- SURF & SUP /
- Surfboard Fins /
- FCS II /
- FCS II Reactor Quad Rear PC Fin Set - Charcoal/Black
FCS II Reactor Quad Rear PC Fin Set - Charcoal/Black
FCS II Reactor Quad Rear PC Fin Set - Charcoal/Black
Speed & tight turns. Ideal for beach breaks.
Overview
Designed for speed and tight turns, with added tail release.
Upright template allows for tighter, more acute directional changes.
Smaller centre fin for increased pivot and tail release.
Ideal for surfers who like to perform fast, progressive turns.
Quad Rear (2 fin) set.
Ideal Conditions
Suitable for hollow waves, particularly good for beach breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Features
- Fin System: Tri Fin Set
- Colour: Charcoal
- Materials + Construction: Performance Core Carbon
- Suggested Conditions: Suits hallow waves and punchy beach breaks
- Size Recommendation: Medium: (65kg - 80kg)
- Recommended Board Type: Recommended for performance shortboards with moderate-to-low rocker
Fin Size Specifics:
- Depth: 4.57" - 116mm
- Base: 4.34" - 110mm
- Area: 14.96" - 9650mm sq
- Sweep: 31.9 Degrees
- Foil: Flat
Size Guide:
- X-Small: Under 55Kgs
- Small: Under 55 - 70Kgs
- Medium: 65 - 80Kgs
- Large: 75 - 90Kgs
- X-Large: Over 85Kgs
Overview:
- Fast reaching fin for performing tight radius turns
- Upright template with flat foil on the side fins allows for acute directional changes
- Designed for surfers who like to stay tight in the pocket and perform aerial maneuvers
- Designed for power surfers who like to push hard against their fins and draw out their turns
Please Note:
- This fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System
Was:$175.00Now:$95.00Price:$95.00 -
Fcs2 Accelerator Neo Glass Medium Tri Fin Set
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal conditions
A wide range of conditions, particularly good in critical overhead waves
Board Types
Performance boards with the FCS II Fin System.Neo Glass
Neo Glass fins are precision molded using long strand fiberglass and a marine grade polymer. Very affordable yet considered a premium construction due to its high fiberglass content and active flex pattern, these fins will accommodate a wide range of surfers and surfing conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.39" / 111mm
Depth: 4.58" / 116mm
Area: 15.28"2 / 98600mm2
Sweep: 33.7o
Foil: Flat$119.00 -
Fcs2 Accelerator Perfomance Core Tri Fins
Speed, flow and response with added control. Excels in critical conditions.
Overview
Designed for a balance of speed, flow & response with added control.
Oversized, all-round template with a fuller tip.
Ideal for surfers who like to attack the wave and perform aggressive turns.Ideal Conditions
A wide range of conditions, particularly good in critical overhead waves.
Board Types
Designed to fit the FCS II Fin System.
Recommended for performance shortboards with moderate-to-low rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Fin Family
Accelerator: Find Control. Speed, flow and response with added control.
Size
MEDIUM 65Kg - 80Kg
$174.00 -
Speed, flow and response with added control. Excels in critical conditions.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for a balance of speed, flow & response with added control.
- Oversized, all-round template with a fuller tip.
- Ideal for surfers who like to attack the wave and perform aggressive turns.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Overview
- Mick's fin in premium PC material delivers a dynamic, yet very controlled feel when performing powerful turns.
- Ideal for power surfers who like to snap hard off the top and carve long roundhouse cutbacks.
- This fin provides maximum drive and control.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
$209.95 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
FCS II Accelerator Neo Glass Eco Tri Fins
FCS have made it their mission to minimise their footprint by designing high quality products that use low impact,sustainable materials.
$119.00 -
Fcs2 Mick Fanning PG Twin+1
NEW RELEASE: Mick Fanning's specialty twin takes aspects of the revolutionary H4 and Mick's wildly popular signature thruster to combine into a highly tuned twin form, built for speed and control.
Overview
- Developed in collaboration with Mick Fanning, this twin plus 1 is focused on speed, power, and control.
- Born from the H4 template, the hatchet-like tip produces instantaneous acceleration from take-off to bottom turn and creates a feeling of stability when pushing through turns
- The wide, thick base is tuned for rigidity & maximum driving power, combined with a smaller stabiliser fin that mimics the side fin template and serves to control the set
- Foil: With a focus on speed, the contemporary foils on the side fins significantly reduces drag and introduces flex in the upper half of the fin precisely where it’s needed.
Performance Core + AirCore
Fins with AirCore Technology feature a pressed polyurethane foam core that mimics the geometric foil of the fin.
AirCore technology reduces the amount of fiberglass required in the RTM molding process making it much lighter while allowing total manipulation of the flex.
X-LARGE (One size suits all)
$229.00 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95 -
FCS II Performer Quad Rear Fin Set - Small
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well-proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad Rear (2 fins) set.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
$119.95 -
FCS II HS "Hayden Shapes" PC Carbon Medium Tri Quad Set
Haydenshapes 'HS' shaper fin. An all round template with longer base for exceptional speed when driving off the bottom.
Overview
- FCS II Tri-Quad (5 fin) Shaper Fin designed by Hayden Cox from Hayden Shapes.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker.
- This fin produces exceptional speed when driving off the bottom, especially on longer open face waves.
Ideal Conditions
- A wide range of conditions, and waves.
Board Types
- Designed to fit the FCS II Fin System.
- Perfectly suited to the HS Hypto Krypto and other higher volume board models with lower rocker
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$329.00 -
FCS II Matt Biolos Tri-Quad Fin Set
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
- Tri/Quad (5 fin) set.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
$319.00