FCS II Carver PC Tri Fin Set - Eucalyptus
FCS II Carver PC Tri Fin Set - Eucalyptus
Powerful, drawn-out turns. Excels on open-face waves.
Overview
Designed for powerful, drawn-out turns with added hold.
An elongated template with a high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
Designed to fit the FCS II Fin System.
Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
Carver: Find Power. Powerful, drawn-out turns with added hold.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)
Fin | Base (inches) | Base (mm) | Depth (inches) | Depth (mm) | Area (inches) | Area (mm) | Sweep Deg° | Foil |
MED | 4.47 | 113 | 4.54 | 115 | 14.96 | 9650 | 37 | Flat |
LRG | 4.58 | 116 | 4.66 | 118 | 15.73 | 10150 | 37 | Flat |
XL | 4.69 | 119 | 4.77 | 121 | 16.51 | 10650 | 37 | Flat |
Bulky items
You will be charged a shipping fee based on your New Zealand area postal code. There are two pricing categories; small or big bulky. The fee will be calculated in the checkout page once you have put in your postal address. Big Bulky items will only be shipped to your nearest Mainfreight Depot for pick up from the Depot.
You may also like ...
-
Fcs2 Carver Performance Core Tri- Medium
Elongated fin for performing long arc turns.
High degree of sweep angle provides exceptional control off the bottom and when carving on the open face.
Designed for power surfers who like to push hard against their fins and draw out their turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Recommended for boards with deep concaves and moderate-to-extreme rocker.Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Please Note: this fin is designed to be used exclusively with the FCS II Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN SPECS: MEDIUM
Base: 4.47" / 113mm
Depth: 4.54" / 115mm
Area: 14.96"2 / 9650mm2
Sweep: 37.0
Foil: Flat$159.00 -
Fcs2 Julian Wilson Performance Glass Tri Fin Set
Julian Wilson's updated signature fin. Speed and projection for taking flight and progressive surfing.
OVERVIEW
Made from super responsive Performance Glass material, Julian's new fin focuses on speed and projection for taking flight and adopting a more progressive approach, while maintaining a feeling of predictability and control through longer arc turns.
IDEAL CONDITIONS
Open face, down-the-line waves, particularly good in point and reef breaks.
BOARD TYPES
Performance boards with deep concaves and moderate-to-extreme rocker.
Please Note: this fin is designed to be used exclusively with the FCS 2 Fin System, and will not fit in the traditional FCS Dual Plug System.
FIN MATERIAL
PERFORMANCE GLASS
FIN SIZE
GROM (under 45Kg) Blue Stripe
MEDIUM (65Kg - 80Kg) Green Stripe
LARGE (75kg - 90kg) Orange StripeFIN SPECS
GROM (Blue Stripe)
Base: 4.10" / 104mm
Depth: 4.19" / 107mm
Area: 12.81"² / 8264 mm²
Sweep: 35.8°
Foil - Side Fins: 80/20
Foil - Centre Fin: 5/50MEDIUM (Green Stripe)
Base: 4.46" / 113mm
Depth: 4.56" / 116mm
Area: 15.13"² / 9763 mm²
Sweep: 33.3°
Foil - Side Fins: 80/20
Foil - Centre Fin: 50/50LARGE (Orange Stripe)
Base: 4.57" / 116mm
Depth: 4.67" / 119mm
Area: 15.91"² / 10262 mm²
Sweep: 35.8°
Foil - Side Fins: 80/20
Foil - Centre Fin: 50/50Was:$199.00Now:$100.00Price:$100.00 -
Speed ​& tight turns. Ideal for beach breaks.
Overview
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$179.00 -
Balance of speed, flow and response. Suitable for all conditions.
Overview
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
- Quad (4 fin) setup.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$259.00 -
Speed & tight turns. Ideal for beach breaks.
Overview
LIGHTER CONSTRUCTION. SMOOTHER FEEL.
The new PC Carbon Essential Series utilises a superior blend of carbon tissue and our ultralight AirCore construction to deliver a more user-friendly flex to achieve faster start up acceleration, and a smoother feel through turns.
- Designed for speed and tight turns, with added tail release.
- Upright template allows for tighter, more acute directional changes.
- Smaller centre fin for increased pivot and tail release.
- Ideal for surfers who like to perform fast, progressive turns.
Ideal Conditions
- Suitable for hollow waves, particularly good for beach breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-low rocker.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
The new PCC Essential Series fins have been constructed using AirCore technology, which is a pressed polyurethane foam core that mimics the geometric foil of the fin. With AirCore we can make a much lighter fin with total manipulation of the flex.
The internal carbon framework is designed specifically to suit each template, and by switching to epoxy resin and adding a carbon twill to the base we’ve delivered a more user-friendly flex pattern. Stiffness in the lower half of the fin enhances drive and acceleration from take-off, and a softer flex through the top half of the fin results in a smoother and more predictable feel when turning.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$199.00 -
Fcs2 Kolohe Andino Perfomance Core Tri Fins
Kolohe Andino's signature fin delivers a lively mix of drive, pivot and tail release. Designed for performing fast, explosive turns and airs on and above the wave.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for performance shortboards with moderate-to-extreme rocker.
Fin Family
- Accelerator: Find Control. Speed, flow and response with added control.
$199.00 -
- Designed for powerful, drawn-out turns with added hold.
- Elongated template with high degree of sweep provides exceptional hold off the bottom and when carving on the open face.
- Ideal for power surfers who like to push hard against their fins and draw out their turns.
Ideal Conditions
- Open face, down-the-line waves, particularly good in point and reef breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for boards with deep concaves and moderate-to-extreme rocker.
Fin Family
- Carver: Find Power. Powerful, drawn-out turns with added hold.
Glass Flex
Glass Flex (GF) fins are molded from engineering grade polymer. The flex of these fins has been designed to help novice surfers maintain speed and acceleration as they learn to execute turns and manoeuvres.
X-SMALL Under 55Kg
SMALL 55Kg - 70Kg
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90Kg
X-LARGE Over 85Kg$89.00 -
Fcs2 Performer Neo Glass Eco Tri Fins
The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
Constructed with 50% glass and bio-resin, the Neo Glass Eco Performer has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The Performer template in Neo Glass Eco offers a balance of speed, flow and response and is suitable for all conditions.
- Designed for a balance of speed, flow & response.
- Well proportioned template with Inside Foil Technology (IFT).
- Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
- A wide range of conditions from beach breaks to point breaks.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types.
Fin Family
- Performer: Find Balance. A balance of speed, flow & response.
Size
MEDIUM 65Kg - 80Kg
LARGE 75Kg - 90KgNeo Eco
About Eco Blend
At FCS, we’ve made it our mission to minimise our footprint by designing high quality products that use low impact, sustainable materials. Constructed with 50% glass and bio-resin, the Neo Glass Eco Blend range has a low impact construction with high impact performance that’s recommended for lighter more agile surfers. The new range also sees reduced use of fossil fuels and a smaller carbon footprint than traditional materials.Sustainability & Community
Our Eco Resin is created by Arkema, a founding member of Pragati, the sustainable castor initiative. Pragati trains farmers to build capacity, improve yields, and reduce environmental impacts, thus helping them to cultivate castor beans effectively and ecologically. The initiative also provides educational materials to improve the skills and knowledge of the local farm
$159.95 -
Fcs2 Mark Richards Tri Fins - Lavender / Black
NEW SEASON COLOURS
MR's twin + stabiliser template. Exceptional pivot off the top, while centre fin adds control.
Overview
- Mark Richard's famous twin template produces exceptional drive and speed.
- The small stabilizer (centre fin) adds control whilst maintaining the freedom and manoeuvrability of a twin fin set up.
Board Types
- Designed to fit the FCS II Fin System.
- Recommended for all board types including fish, funboard and twin fin boards.
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer molding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light, and can be used in a variety of different conditions.
$209.00 -
FCS2 Sharp Eye Matt Biolos PC Tri Fins
Designed by revered shaper Matt "Mayhem" Biolos. Same proven template with a new look.
Overview
- The MB template offers freedom to perform tight turns in the pocket with an emphasis on speed.
- Sitting in the reactor family, the MB is considered a high performance fin because it responds incredibly fast, but still offers enough control so you can confidently lay into a turn with plenty of force.
Ideal Conditions
- A wide range of conditions, particularly good in critical overhead waves.
Board Types
- Designed to fit the FCS II Fin System.
- Performance shortboards and hybrid models.
Fin Family
- Reactor: Find Speed. Speed, tight turns & snaps.
Performance Core Carbon
Often referred to as PC Carbon or PCC, these fins are highly responsive and feature strategically placed carbon that’s designed to complement the fin template. PCC fins suit fast surfing and are favored by power surfers who like to perform explosive turns on critical parts of the wave.
X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)$199.00 -
FCS II Performer Performance Core Tri Fin Set - Tranquil Blue
Balance of speed, flow and response. Suitable for all conditions.
Overview
Designed for a balance of speed, flow & response.Well-proportioned template with Inside Foil Technology (IFT).Ideal for surfers who want a reliable ‘All Round’ fin delivering a combination of speed and maneuverability with flow between turns.
Ideal Conditions
A wide range of conditions from beach breaks to point breaks.
Board Types
Designed to fit the FCS II Fin System.Recommended for all board types.
Fin Family
Performer: Find Balance. A balance of speed, flow & response
Performance Core
Performance Core (PC) fins are made using a multi-layered resin transfer moulding process. The flex pattern in PC fins extends progressively from the base through to the tip, helping the surfer to maintain drive and hold through a turn. This versatile fin material is light and can be used in a variety of different conditions.X-SMALL (Under 55Kg / 120 Lbs)
SMALL (55Kg - 70Kg / 120 - 155 Lbs)
MEDIUM (65Kg - 80Kg / 145 - 175 Lbs)
LARGE (75Kg - 90Kg / 165 - 200 Lbs)
X-LARGE (Over 85Kg / 190 Lbs)Fin Base (inches)
Base (mm)
Depth (inches)
Depth (mm)
Area (inches)
Area (mm)
Sweep Deg°
Foil
XS 4.13 104.8 4.3 109.3 13.26 8554 33.7° IFT SML 4.25 108 4.43 112 14.03 9054 33.7° IFT MED 4.37 111 4.55 115 14.81 9554 33.7° IFT LRG 4.48 113.7 4.67 118 15.58 10054 33.7° IFT XL 4.59 117 4.78 121 16.36 10554 33.7° IFT $179.95