Solarez Epoxy 30ml/1oz
Description
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
You may also like ...
-
Ding All Fibreglass Cloth - 0.9m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
90 cm x 68 cm
$19.00 -
Ding All Fibreglass Cloth - 2.7m
Ding All Fiberglass Cloth can be laminated with Polyester and Epoxy Resin to add uniform strength and shape to Surfboard Boards and beyond!Ding All Fiberglass cloth is lightweight and has a high strength to weight ratio. It can also be layered with resin to reinforce repairs. Our Fiberglass cloth packs contain "E-Glass", the industry standard for surfboard repairs or construction. E-Glass is very strong and easy to apply with resin.- The cloth wets out super clear and transparent allowing any colors or graphics beneath to show through once it has hardened
- Ding All Fiberglass Cloth is highly pliable, allowing it to conform on curved surfaces of the surfboard
- Variety of applications: It can be used for tubs, showers, sinks, pools, hot tubs, boat repairs, and more!
- 2.7m x 68 cm
$39.00 -
Phix Doctor SunPowered Super Mini Dura Resin Fiberfill Kit 1 oz/29.5ml
The Super Mini Dura Resin repair kit works for all board types that do not require mixing, fiberfilled, quick repair.
Dura Rez cures in full sun in less than 3 minutes for a professional finish that saves you time and money! Ultra Clear, SunPowered, Fiber Filled Dura Rez Works on Epoxy and Polyester, will not harm the foam core, and NEVER hardens in the tube.
Non-yellowing SunPowered resin that sets up fast and nearly showroom perfect when the clear cover sheets are used to contour and magnify the suns effect on this premium resin.
Dura Rez- Safe for Epoxy and Polyester
- Non-Yellowing Resin
- Fiber Filled
- Super Fast 3 Minute Cure
- Endless Shelf Life
Kit includes:
1 fl oz Tube of Dura Resin
Dual Grit Sand Pad
2 Mix Sticks
2 Smoothy Sheets$25.00 -
Phix Doctor UV Curing Light
Phix Doctor was the first to offer UV Curing lights for the DIY ding repair market, and now we’ve stepped up the power with our new 9 LED UV Curing Light! Packaged in an earth friendly biodegradable outer box this small but powerful torch can cure uv resin in as little as 1 minute in areas of approximately 2 inches (5 cm) radius. Don’t be fooled by overpriced gimmicky curing lights, this low priced game changing tool puts the power of the sun in your hands to do repairs anytime in no time!
$40.00 -
NO SUN/UV CURE, USES CATALYST (Included)
Phix Doctor use ultra fresh Silmar brand Polyester resin and the highest quality products.
Will this repair kit work for my epoxy board?
No, polyester resin is not compatible with styrofoam core boards. We advise to never allow this resin to be in contact with styrofoam (EPS) cores.$40.00 -
Phix Doctor SunPowered Mondo Dura Resin Fiberfill Tube 2 oz/59ml
Dura Resin Fiberfill Tube
Finally… One Ultra Clear and Strong Resin that’s Safe for all Surf Boards… Dura Resin by Phix Doctor!1 MINUTE CURE – SunPowered, Fiber-filled Dura Resin Includes a Dual Grit Sand Pad and Smoothy Sheets. Safe For Epoxy and Poly Boards. The Super Mini is Airline Approved and Delivers Fast, Pro Finish, Permanent Results with Endless Shelf Life Guaranteed!
KIT INCLUDES:
2 FL OZ TUBE OF DURA RESIN
60/220 DUAL GRIT SAND PAD
3 MIX STICKS
2 SMOOTHY SHEETS$30.00 -
Sponge Rez Body Board Repair 15ml
Sponge-Rez is a tough, clear, flexible resin formulated to mend the most common types of catastrophes bodyboards are heir to; worn-out leash anchors, creased bottoms, delaminated decks, hulls or rails, sponge-deck (also known as rash-deck) and semi-fatal gouges.
Sponge-Rez works on all types of bodyboard materials including Ethafoam, Surlyn, EVA, Vinyl, and Arcel, however it will melt styrofoam (EPS) cores.
Sponge-Rez also repairs cracked, weathered swim fins. If applied to the fin blades, it increases their stiffness and thrust.
General Directions:
- Surface should be clean, dry, and free of dirt, and or wax.
- Use in well ventilated area, preferably outdoors. DO NOT deliberately inhale vapours – don’t be stupid.
- Apply liberally on porous surfaces. Use spreader to force Sponge-Rez into the damaged part of the board. Do not apply Sponge-Rez with your fingers.
- Sponge-Rez will “skin-over” in about 10-15 min. and feel dry in about 2 hours but a complete cure takes 24 hours – especially when filling deep gouges. This is not a UV cure product.
$16.00 -
Solarez Epoxy Ding Repair Kit 30 Ml
Wh
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
$34.00 -
Phix Doctor - Bodyboard Weld and Seal Repair Kit - 1 oz/29ml
NEW Bodyboard Repair Kit – Soft Phix Crystal Clear Bodyboard repair.
Soft Phix bonds to styrofoam (EPS), EVA, HDPE, Rubber, Wood, Metal, and much more!Bodyboard Weld & Seal Repair Kit – Finally a single application resin designed to protect your board from the tough elements of land and sea. Keep your boards in top running condition with this ultra clear, uv resistant, super flexible waterproof polymer that bonds well to all softboard inner and outer materials including EPS (styrofoam cores) HDPE (slick bottoms), Arcel, PP, PE and much more. This super flexible, UV resistant resin fills deep holes, delaminations, rips, split seams, loose leash plugs, bodyboard fins, wetsuits, dive masks and more! Super easy to apply, with medium strength curing in 24 hours, full cure in 48 hours.
- Durable
- Crystal Clear
- Super Flexible
- Waterproof
- Bonds well to Styrofoam/EPS, EVA, HDPE, Rubber, Wood, Metal and more.
- Easy To Use
$30.00 - Durable
-
FCS Simple Patch Repair Kit Epoxy
SimplePatch Repair Kit EPS
Value Pack – Perfect for 5 – 6 repairs, ideal for any surf trip. Includes: 1 x SimplePatch Large, 3 x SimplePatch Regular, 1 x SpeedFill. Select PU or Epoxy version to suit your boards.
SimplePatch is a revolutionary resin infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high strength permanent repair in minutes. No more mixing resins, no more sticky fingers, no more endless sanding to get smooth, just simply Peel & Stick! SpeedFill gouges, holes, dings and cracks in surfboards prior to applying a SimplePatch to achieve a professional finished structural repair in minutes.
$69.00 -
FCS Simple Patch Repair
Designed for instant, tool-free application, guaranteeing a permanent, waterproof finish and a smooth surface without the need for sanding. Resin Infused Fibreglass pathc for all EPS and Epoxy Boards.
SimplePatch is a revolutionary resin-infused 3oz fibreglass patch that can be easily applied to create a smooth finished, waterproof, high-strength permanent repair in minutes. No more mixing resins, no more sticky fingers, and no more endless sanding to get smooth, just simply peel and stick!
Select either PU or Epoxy version to suit your board.Features
- Fast to apply anywhere with no tools
- Provides a permanent repair
- Makes the board waterproof again
- Has a smooth surface finish without sanding
- Available in two sizes: Regular (69mm x 37mm) and Large (98mm x 60mm)
$15.00 -
